About Department
The Department of Mechanical Engineering has been in existence since 2009. The Department is grown into a full-fledged one with well-equipped lab facilities, Infrastructure and faculty members of various specializations. Activities in the department are carried out to consort the global innovations, inventions, alternate resource development in the mechanical world for the human mankind journey. The students are trained to upgrade themselves and the department is striving to mould them in to a better engineer in the society. Individual attention and sessions have drawn out innate capabilities of the students.
The department also organizes frequent industry visits, subject related seminars, guest lectures, workshops etc. to enhance the depth of the subject. Department of Mechanical Engineering provides a pavement to do research work and has been recognized as research centre by Anna University. The Department is architected with 23 faculty members with 9 Ph.Ds' and 13 faculty members pursuing doctoral programmes. Research works are carried out in various fields including composites, machining, design, nanotechnology, coatings etc.
Vision
To produce qualified, self-driven mechanical engineers with moral values.
Mission
The Stated Vision of the Mechanical Engineering will be achieved by
- MD1: Enriching technical knowledge through value added courses, interaction with professional societies and research activities.
- MD2: Imparting quality education by competent faculty through learning tools.
- MD3: Providing industry connect opportunities for the students to enhance their talents, innovative ideas and entrepreneurial skills.
- MD4: Developing technical expertise with latest technologies through state-of-the-art laboratories.
- MD5: Encouraging the students to meet the challenges of industry and society with moral values.
Program Educational Objectives (PEOs)
The Graduates of Mechanical Engineering Programme will
- PEO1: Apply technical knowledge and skills in their career to find effective solutions for the problems in mechanical engineering and other related disciplines.
- PEO2: Contribute in technological advancements through continual learning in the field of mechanical engineering.
- PEO3: Exhibit leadership qualities with moral and ethical values for the socio technological development.
Program Outcomes(POs)
After the successful completion of B.E Programme in Mechanical Engineering, students will be able to:
- PO1 Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
- PO2 Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
- PO3 Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
- PO4 Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
- PO5 Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.
- PO6 The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
- PO7 Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
- PO8 Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
- PO9 Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
- PO10 Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
- PO11 Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one's own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
- PO12 Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.
Program Specific Outcome (PSO)
After the successful completion of B.E Programme in Mechanical Engineering, students will be able to:
- PSO1: Apply modern tools viz. Solid works, CREO, Ansys, Edge CAM, Autodesk Inventor, Automation Studio for product design and development
- PSO2: Analyse complex Engineering problems in the areas of Thermal, Design and Manufacturing Engineering
- PSO3: Practice moral and ethical values in engineering career to adapt techno-environmental changes.
CO-PO Mapping
Faculty Details
01. Professor and Head (i/c) | ||
![]() |
Name: | Dr.S.Nandhakumar |
Designation: | Professor | |
Qualification: | M.E., Ph.D. | |
Experience: | 21 years 6 months | |
Specialization: | Industrial Engineering | |
Email: | nandhakumar@drngpit.ac.in | |
Know more |
02. Professor | ||
![]() |
Name: | Dr.P.Sivaprakash |
Designation: | Professor | |
Qualification: | M.E., Ph.D., M.Sc. | |
Experience: | 13 years | |
Specialization: | Industrial Safety, Nuclear Safety and Risk Management, Ergonomics/Human Fators Engineering | |
Email: | sivaprakash@drngpit.ac.in | |
Know more |
03. Assistant professor | ||
![]() |
Name: | Dr.P.Gopi Krishnan |
Designation: | Assistant professor | |
Qualification: | M.E, Ph.D. | |
Experience: | 16 Years | |
Specialization: | Manufacturing | |
Email: | gopikrishnan@drngpit.ac.in | |
Know more |
04. Assistant Professor | ||
![]() |
Name: | Dr.M.Nallusamy |
Designation: | Assistant Professor | |
Qualification: | M.E., MBA., Ph.D. | |
Experience: | 17 years 8 months | |
Specialization: | Engineering Design | |
Email: | nallusamy@drngpit.ac.in | |
Know more |
05. Assistant Professor | ||
![]() |
Name: | Mr.A.Jaganathan |
Designation: | Assistant Professor | |
Qualification: | M.E | |
Experience: | 15 years 5 months | |
Specialization: | Engineering Design | |
Email: | jaganathan.a@drngpit.ac.in | |
Know more |
06. Assistant Professor | ||
![]() |
Name: | Dr.D.Vasanth Kumar |
Designation: | Assistant Professor | |
Qualification: | ME., Ph.D. | |
Experience: | 11 years 6 months | |
Specialization: | Industrial Engineering | |
Email: | vasanthkumar@drngpit.ac.in | |
Know more |
07. Assistant Professor | ||
![]() |
Name: | Mr.R.Vijayakumar |
Designation: | Assistant Professor | |
Qualification: | M.E., (Ph.D) | |
Experience: | 10 years | |
Specialization: | Manufacturing Engineering | |
Email: | vijayakumar@drngpit.ac.in | |
Know more |
08. Assistant Professor | ||
![]() |
Name: | Mr.M.Mani |
Designation: | Assistant Professor | |
Qualification: | M.E., (Ph.D) | |
Experience: | 9 years 3 months | |
Specialization: | Engineering Design | |
Email: | mani@drngpit.ac.in | |
Know more |
09. Assistant Professor | ||
![]() |
Name: | Mr.Pradeep.V.P |
Designation: | Assistant Professor | |
Qualification: | M.E | |
Experience: | 8 years 8 months | |
Specialization: | CAD/CAM | |
Email: | pradeep@drngpit.ac.in | |
Know more |
10. Assistant Professor | ||
![]() |
Name: | Mr.P.Ashok Kumar |
Designation: | Assistant Professor | |
Qualification: | M.E.,(Ph.D) | |
Experience: | 7 years 6 Months | |
Specialization: | Energy Engineering | |
Email: | ashokkumar@drngpit.ac.in | |
Know more |
11. Assistant Professor | ||
![]() |
Name: | Mr.A.G.Karthikeyan |
Designation: | Assistant Professor | |
Qualification: | M.E., (Ph.D) | |
Experience: | 7 years 8 months | |
Specialization: | Mechatronics Engineering | |
Email: | karthikeyan.ag@drngpit.ac.in | |
Know more |
12. Assistant Professor | ||
![]() |
Name: | Mr.K.Kiran |
Designation: | Assistant Professor | |
Qualification: | M.E., (Ph.D) | |
Experience: | 6 years 9 months | |
Specialization: | Engineering Design | |
Email: | kiran@drngpit.ac.in | |
Know more |
13. Assistant Professor | ||
![]() |
Name: | Mr.S.Rajkumar |
Designation: | Assistant Professor | |
Qualification: | M.E., (Ph.D) | |
Experience: | 6 years 9 months | |
Specialization: | Advanced Manufacturing Technology | |
Email: | rajkumar@drngpit.ac.in | |
Know more |
14. Assistant Professor | ||
![]() |
Name: | Mr.Suriyaprakash.M |
Designation: | Assistant Professor | |
Qualification: | M.E., (Ph.D.) | |
Experience: | 6 years 2 months | |
Specialization: | CAD/CAM | |
Email: | suriyaprakash@drngpit.ac.in | |
Know more |
15. Assistant Professor | ||
![]() |
Name: | Mr.Karthikeyan.R |
Designation: | Assistant Professor | |
Qualification: | M.E., (Ph.D) | |
Experience: | 6 years 9 months | |
Specialization: | Manufacturing Engineering | |
Email: | karthikeyan.r@drngpit.ac.in | |
Know more |
16. Assistant Professor | ||
![]() |
Name: | Mr.P.Janarthanan |
Designation: | Assistant Professor | |
Qualification: | M.E – Engineering Design | |
Experience: | 7 Years 4 Months | |
Specialization: | Engineering Design | |
Email: | janarthananp@drngpit.ac.in | |
Know more |
17. Assistant Professor | ||
![]() |
Name: | Mr.C.Selva Kumar |
Designation: | Assistant Professor | |
Qualification: | M.E | |
Experience: | 5 Years 4 Months | |
Specialization: | Thermal Engineering | |
Email: | selvakumarc@drngpit.ac.in | |
Know more |
18. Assistant Professor | ||
![]() |
Name: | Mr.S.Dharaga Vineeth |
Designation: | Assistant Professor | |
Qualification: | M.E | |
Experience: | 5 years 4 months | |
Specialization: | Energy Engineering | |
Email: | dharagavineeth@drngpit.ac.in | |
Know more |
Funds/Grants Received
Co-ordinator/ Investigator |
Events | Funding Agency | Amount |
---|---|---|---|
Mr.V.P.Pradeep | CSIR Sponsored One Day National Level Seminar on “Bio-Tribology and Nano Tribology for Medical and Industrial Applications” | Council of Scientific & Industrial Research (CSIR), New Delhi | 15000 |
Dr.P.Gopikrishnan, Dr.V.Sivaraman | Six Days Online Faculty Development Program on "Finite Element Analysis (ME8692)" | Centre for Faculty Development, Anna University. | Full financial support |
Dr.R.Thirumalai, Dr.S.Nandhakumar | ICDMME2021 | AICTE | Rs. 2,40,000 |
Dr.S.Nandhakumar, Mr.S.Rajkumar | Anna University sponsored FDP on “ME8071 ADDITIVE MANUFACTURING” | Anna University | Rs. 30,000 |
Dr.K.Kalaiselvan | AICTE sponsored STTTP Innovation in Materials and Industrial Automation | All India Council for Technical Education | RS 2,90,000 |
Dr.K.Kalaiselvan | Two days Workshop on Automation in Welding and Non Destructive Testing | Indian Welding Society | RS 15,000 |
Dr. P.Sivaprakash | Faculty Development Program on “Exploring Additive Manufacturing in healthcare Applications” | AICTE training and Learning ATAL | RS 93,000 |
Mr.S.Rajkumar | One Day National Level Workshop on "Emerging trends in Advance Biofuel and Bioenergy for Sustainable Future" | Council of Scientific & Industrial Research (CSIR), New Delhi | RS 50,000 |
Dr.B.Shreeram | ICMR sponsored Two Days Translational Research Workshop on “Biochemical Characterization of the Cell – Biomaterial Interface for Medical Implants” | Indian Council for Medical Research (ICMR) | Rs. 50,000 |
Mr.S.Rajkumar | ICMR sponsored Two Days Translational Research Workshop on “Design and Fabrication of Patient Friendly Custom Medical Products by Additive Manufacturing process” | Indian Council for Medical Research (ICMR) | Rs. 1,00,000 |
Mr.R.Karthikeyan | CSIR Sponsored One Day National Level Workshop on “Manufacturing Strategies towards Sustainable Future” | Council of Scientific & Industrial Research (CSIR),New Delhi | Rs.50,000 |
Mr.B.Sreeram | Six Days Faculty Development Program on Engineering Thermodynamics | Anna University | Rs.30,000 |
Mr.S.Rajkumar | CSIR Sponsored One Day National Level Workshop on “Research Challenges and Opportunities in Advanced Computational Fluid Dynamics for Engineering Applications” | Council of Scientific & Industrial Research (CSIR),New Delhi | Rs.15,000 |
Mr.S.Rajkumar | CSIR Sponsored One Day National Level Workshop on “Innovations in Renewable Energy & Clean Energy Production for Resilient Future” | Council of Scientific & Industrial Research (CSIR),New Delhi | Rs.15,000 |
Mr.S.Rajkumar | CSIR Sponsored One Day National Level Workshop On Recycling and Industrial Waste Management for Sustainable Waste Management’ | Council of Scientific & Industrial Research (CSIR),New Delhi | Rs.15,000 |
Dr.K.Ravi Kumar | One Day Seminar on Processing and characterization of multi-functional green composite coatings for Medical equipments and implants |
DST - SERB | Rs.1,00,000/- |
Dr.K.Ravi Kumar | Two Day National Level Workshop on Biomimetic Medical Device Design Using TRIZ |
ICMR | Rs.50,000/- |
Mr.S.Rajkumar | One Day National Level Workshop on Research Perspectives of 3D Printing & Additive Manufacturing in Medical Applications |
ICMR | Rs.80,000/- |
Dr. V.S. Sreebalaji Mr.R.Vijaya Kumar |
Entrepreneurship Awareness Camp 2016 - 2017 |
DST-NIMAT, EDI INDIA | Rs.20,000/- |
Dr. V.S. Sreebalaji Mr.R.Vijaya Kumar |
Entrepreneurship Awareness Camp 2017 - 2018 |
DST-NIMAT, EDI INDIA | Rs.40,000/- |
Dr. V.S. Sreebalaji Mr.R.Vijaya Kumar |
Pradhan Mandhri Yuva Yojana (PMYUVA) | Ministry of Skill Development & Entrepreneurship, Government of India | Rs.12,20,000/- |
Dr.T.Siva Kumar | One day Conference on “New Nano Composite Coatings for Tribological Applications “ | DRDO | Rs. 30,000/- |
Dr. V.S.Sreebalaji Dr.K.Ravi Kumar |
FDP on “Automobile Engineering” | Anna University | Rs. 25,000/- |
Dr. R. Thirumalai | Mechanical Properties, Welding Characteristics And Corrosion Behaviour Studies Of Nickel Based Alloy, Inconel 718 For Applications In Marine Environment | DST- SERB | Rs.1,05,000/- |
Dr.K.Ravi Kumar | Patient friendly health care equipments design using TRIZ – An Innovative Technique | ICMR | Rs. 40000/- |
Mr. S.Rajkumar | One day National Level workshop on Research Perspectives on "Futuristic Energy Materials and Energy Storing Systems" | Council of Scientific & Industrial Research | Rs. 15,000/- |
Mr.A.G.karthikeyan | Robotic Assisted Blood Drawing Machine using Rasoberry-Pi | Tamil Nadu State Council for Science and Technology | Rs. 7,500/- |
Funding Received for Skill Based training
Coordinator | Scheme Of Proposals | Sponsoring Agency | Title Of The Event | Date Of The Event | Fund Received |
---|---|---|---|---|---|
Dr.V.S.SreeBalaji Dr.B.Shreeram Mr.M.Suriyaprakash |
PMKVY-Vehicle assemblyFitter Technician | NSDCGovt of India | Skill Based training | JAN – MAY 2017 | Rs. 3,56,400 |
MoU's
S.No |
Year |
Industry |
Date |
---|---|---|---|
1. | 2022 | MJP Enterprises Pvt. Ltd, Coimbatore | 15.02.2022 |
2. | 2021 | IMIK Technologies , Coimbatore | 26.11.2021 |
3. | 2018 |
Mangla Smart Energy solutions Pvt.Ltd (MSES),Tirupur. | 08-03-2018 |
4. | Coimbatore Institute of Technology – Centre of Excellence in Manufacturing Science | 13-02-2018 |
|
5. | Sysnautix technologies Pvt Ltd, Coimbatore | 10-01-2018 |
|
6. | 2017 |
Hexagon metrology India Pvt Ltd, Coimbatore | 19-06-2017 |
7. | 2016 |
Coimbatore Productivity Council (CPC), Coimbatore | 25-04-2016 |
8. | 2014 |
The Coimbatore District Small Industries Association (CODISSIA), Coimbatore | 22-10-2014 |
9. | Coimbatore Industrial Infrastructure Association (COINDIA), Coimbatore | 20-05-2014 |
|
10. | 2012 |
Innovent Engineering Solutions Pvt Ltd, Coimbatore | 22-02-2012 Renewed on 13-11-2015 |
11. | 2011 |
CADD Centre, Coimbatore | 17-02-2011 |
List of innovative Video/PowerPoint's Available on Institute website/Link
S.No. | Name of the Faculty | Topic | Video/Powerpoints | Weblink |
---|---|---|---|---|
1. | Dr. S Nandhakumar | Control Charts | Video | www.youtube.com |
2. | Dr. S Nandhakumar | Quality Function Deployment | Video | www.youtube.com |
3. | Dr. K Kalaiselvan | Introduction To EG | Video | www.youtube.com |
4. | Dr. K Kalaiselvan | Metrology - Introduction | Video | www.youtube.com |
5. | Dr. R Thirumalai | BMD And SFD | Video | www.youtube.com |
6. | Dr. R Thirumalai | Isometric Projection | Video | www.youtube.com |
7. | Dr. R Thirumalai | Theories Of Motivation | Video | www.youtube.com |
8. | Dr. R Thirumalai | Communication | Video | www.youtube.com |
9. | Dr. K Ravikumar | Fits And Tolerances | Video | www.youtube.com |
10. | Dr. K Ravikumar | How To Prepare For EG Exam | Video | www.youtube.com |
11. | Dr. P Sivaprakash | Involutes | Video | www.youtube.com |
12. | Dr. V Sivaraman | Theory Of Projection | Video | www.youtube.com |
13. | Dr. M Nallusamy | Impact Of JET | Video | www.youtube.com |
14. | Dr. M Nallusamy | Recruitment | Video | www.youtube.com |
15. | Dr. P Gopi Krishnan | Gyroscopic Couple | Video | www.youtube.com |
16. | Dr. P Gopi Krishnan | Perspective Projection | Video | www.youtube.com |
17. | Dr.B.Shreeram | Streamline, Pathline, Timeline, Streakline | Video | www.youtube.com |
18. | Dr.B.Shreeram | Viscosity | Video | www.youtube.com |
19. | Dr.B.Shreeram | Type Of Flow | Video | www.youtube.com |
20. | Dr.B.Shreeram | Tidal Energy | Video | www.youtube.com |
21. | Dr.B.Shreeram | Surface Tension | Video | www.youtube.com |
22. | Dr.B.Shreeram | Seminar On Viscosity By Students | Video | www.youtube.com |
23. | Mr. M Manikandan | High Pressure Boiler | Video | www.youtube.com |
24. | Mr. M Manikandan | Human Values | Video | www.youtube.com |
25. | Mr. M Manikandan | Projection Of Solids | Video | www.youtube.com |
26. | Mr. M Manikandan | Vehicle Layout | Video | www.youtube.com |
27. | Mr. A Jaganathan | Development Of Surfaces | Video | www.youtube.com |
28. | Mr. A Jaganathan | Material Losses In Forging Shop | Video | www.youtube.com |
29. | Mr. R Vijayakumar | Epicyclic Gear Train | Video | www.youtube.com |
30. | Mr. R Vijayakumar | Steps To Start A New Business | Video | www.youtube.com |
31. | Mr. V P Pradeep | Gas Turbine | Video | www.youtube.com |
32. | Mr. V P Pradeep | Hollier Method | Video | www.youtube.com |
33. | Mr. M Mani | Water Jet Machining | Video | www.youtube.com |
34. | Mr. M Mani | Watt Governor | Video | www.youtube.com |
35. | Mr. M Mani | Thermal Power Plant | Video | www.youtube.com |
36. | Mr. M Mani | Isoparametric Elements | Video | www.youtube.com |
37. | Mr. A G Karthikeyan | Sensors | Video | www.youtube.com |
38. | Mr. A G Karthikeyan | Introduction To Mechatronics | Video | www.youtube.com |
39. | Mr. S Ashok Kumar | Gas Turbine | Video | www.youtube.com |
40. | Mr. S Ashok Kumar | Otto Cycle | Video | www.youtube.com |
41. | Mr. K Kiran | Iron Carbon Equilibrium Diagram | Video | www.youtube.com |
42. | Mr. M Suriyaprakash | Diesel Cycle | Video | www.youtube.com |
43. | Mr. M Suriyaprakash | Otto Cycle | Video | www.youtube.com |
44. | Mr. M Suriyaprakash | Rankine Cycle | Video | www.youtube.com |
45. | Mr. S Rajkumar | Journal Bearing | Video | www.youtube.com |
46. | Mr. R Karthikeyan | Water Jet Machining | Video | www.youtube.com |
47. | Mr. R Karthikeyan | Watt Governor | Video | www.youtube.com |
48. | Mr. S Dharaga Vineeth | Abrasive Machining | Video | www.youtube.com |
49. | Mr. S Dharaga Vineeth | Rocket Types | Video | www.youtube.com |
50. | Mr. S Dharaga Vineeth | Sensors | Video | www.youtube.com |
51. | Dr.V.S.Sreebalaji | TRIZ Principle 5 | Video | |
TRIZ Principle 7 | Video | |||
Triz to Common Man | Video | |||
52. | Dr.K.Kalaiselvan | Inversions of four bar chain mechanism | Video | |
53. | Dr. K. Ravi Kumar | Composite materials - Introduction | Powerpoint | |
Limits, Fits, Tolerances | Powerpoint | |||
Polymers | Powerpoint | |||
Engineering Materials and Metallurgy – Solid Solutions | Powerpoint | |||
54. | Dr. K. Ravi Kumar | Engineering Materials and Metallurgy – Heat Treatment | Powerpoint | |
Engineering Materials and Metallurgy – Ferrous – Non - Metals | Powerpoint | |||
Engineerin Materials and Metallurgy – Failure Mechanism - Testing | Powerpoint | |||
55. | Mr.N. Manikandan | Global Warming | Video | |
56. | Mr.D.Vasanth Kumar | Overview of management | Powerpoint | |
Refrigeration and air conditioning | Powerpoint | |||
Introduction to ucm | Powerpoint | |||
Laser and advances in metrology | Powerpoint | |||
Form Measurement | Powerpoint | |||
Linear and Angular Measurement | Powerpoint | |||
Concept of Measurement | Powerpoint | |||
Maintenance | Powerpoint | |||
Value Engineering | Video | |||
57. | Mr.M.Mani | Orthographic projection | Video | |
58. | Mr.A.G.Karthikeyan | Mechatronics systems | Video |
Various instructional methods adopted by the faculty
S.No |
Name of the Faculty |
Nature of Activity |
Name of the subject |
Topic |
---|---|---|---|---|
1. |
Dr. K. Kalaiselvan | Technical Quiz (MCQ) | Metrology and measurements | Measuring instruments |
2. |
Dr. R. Thirumalai | One minute paper | Engineering Graphics | Isometric Projection – projection of Solids |
3. |
Mr. A. Jaganathan | Case Study (Seminar) | Dynamics of Machinery | Mechanisms in control |
4. |
Mr. N. Manikandan | Charts | Professional Ethics in Engineering | Honesty, integrity, sharing |
5. |
Mr.A.G.Karthikeyan | How stuff works | Mechatronics | Process of accelerometer sensor and microprocessor in automobile applications |
6. |
Mr. S. Rajkumar | Lecture with demonstration | Manufacturing Technology - I | Casting process |
7. |
Mr.M.Suriyaprakash | EDUSAT | Engineering Thermodynamics | Ideal gas and real gas thermodynamic relations |
8. |
Dr. V.S. Sreebalaji | Role Play | Total Quality Management | Six Sigma |
9. |
Mr. K. Gobinath | Case Study (Seminar) | Process Planning and Cost Estimation | Material evaluation, work holding device selection |
10. |
Mr. A. Vijay Anandh | Technical Quiz -MCQ | Engineering Thermodynamics | Air conditioning |
11. |
Dr. K. Ravikumar | Lecture with demonstration | Metrology and measurements | Linear Measurement |
12. |
Mr. A. Selvaraj | Case Study (Seminar) | Total quality management | Implementation of TQM – ISO 9001 |
13. |
Mr. S.Venkatesan | Animated Video | Design of Transmission Systems | Spur gear and Bevel gear |
Research and Development
Department of Mechanical Engineering provides a pavement to do research work in line with it has been recognized as research centre by Anna University in the Academic Year 2015-2016. The department is architected with 6 Ph.Ds' and 16faculty members pursuing doctoral programmes. Faculty members are strengthening the department by publishing their research work in the referred journals. Research works are carried out in various fields including composites, machining, design, nanotechnology, coatings etc., As a result, handful of research papers were published in referred journals. The department also encourages the faculty to enlist their research papers in national and international conferences. The department makes the voice of the faculty to echo in the technical society by encouraging the faculty in publishing books.
Industry Powered Center
Training offered through Industry supported Laboratories
S. No | Name of the Industry Supported | Course Name | Name of conducting lab | Effectiveness |
---|---|---|---|---|
Academic year 2021-2022 |
||||
1 | Autodesk, Banglore | Autodesk fusion 360 Basic Module | CAD lab | Training on Autodessk Fusion 360 to make design analysis was offered to the students |
2 | Autodesk, Banglore | Autodesk fusion 360 Advanced Module | CAD lab | Training on Autodessk Fusion 360 to make design analysis was offered to the students |
Academic year 2019-2020 |
||||
1 | COINDIA | UGCAM, CNC, CMM & EDM | COINDIA Centre, Coimbatore | Skill based training was offered to the students. |
2 | Hexagon Mi | Co-Ordinate Measuring Machine | CMM Lab | Skill based training was offered to the students. |
Academic year 2018-2019 |
||||
01. | Innovent Engineering Solutions Pvt.Ltd,Bangalore | ANSYS & CFD | Simulation & Analysis Lab | Training on ANSYS & CFD to make design analysis was offered to the students |
02. | COINDIA | CNC,UGCAM & EDM | Skill based training on CNC,UGCAM & EDM | Skill based training was offered to the students and got placed |
Academic year 2017-2018 |
||||
01. | Innovent Engineering Solutions Pvt. Ltd, Bangalore | ANSYS 14.5 | Simulation and analysis Lab | Training on ANSYS to make design analysis was offered to the students |
02. | Sudhaa Automation, Coimbatore | Autodesk Inventor | CAD Lab | Training on Autodesk Inventor to model a component was offered to the students |
03. | Sysnautix technologies Pvt Ltd, Coimbatore | CREO 2.0 & Solidworks 2011 | CAD Lab | Training on CREO & Solidworks to model a component was offered to the students |
Academic year 2016-2017 |
||||
01. | Hexagon Metrology India Pvt Ltd, Coimbatore | CMM – I & II Level
Range : X: 500, Y: 600, Z: 400 (in mm) Accuracy:2.1µm. |
Metrology and Measurements- (Industry supported CMM) | Hands on training on CMM was offered to the students |
02. | COINDIA, Coimbatore | CNC, UGCAM and EDM | Skill based training on CNC, UGCAM and EDM | Skill based training was offered to the students and got placed |
03. | CADD center training services, Coimbatore | CREO 2.0 | Simulation and analysis Lab | Training on CREO to model a component was offered to the students |
Academic year 2015-2016 |
||||
01. | Hexagon Metrology India Pvt Ltd, Coimbatore | CMM – I & II Level
Range : X: 500, Y: 600, Z: 400 (in mm) Accuracy:2.1µm. |
Metrology and Measurements- (Industry supported CMM) | Hands on training on CMM was offered to the students |
02. | COINDIA, Coimbatore | CNC, UGCAM and EDM | Skill based training on CNC, UGCAM and EDM | Skill based training was offered to the students and got placed |
03. | CADD center training services, Coimbatore | CREO 2.0 | Simulation and analysis Lab | Training on CREO to model a component was offered to the students |
Value Added Courses
Batch | Semester | Course | No of Students |
---|---|---|---|
2019 - 2023 |
V |
Autodesk fusion 360 Basic Module | 62 |
2018 - 2022 |
VII |
Autodesk fusion 360 Advanced Module | 56 |
2018 – 2022 |
III |
Auto CAD | 53 |
2017 - 2021 |
VII |
CMM & 3D Printing | 36 |
2017 – 2021 |
V |
Ansys | 77 |
2017 - 2021 |
III |
Auto CAD | 90 |
2016 - 2020 |
V |
ANSYS | 111 |
2015 - 2019 |
VII |
CMM & CO INDIA | 137 |
2016 - 2020 |
III |
Auto CAD | 123 |
2015 - 2019 |
V |
Auto desk Inventor | 139 |
2014 - 2018 |
VII |
ANSYS | 119 |
2015 - 2019 |
IV |
CREO | 139 |
2013 - 2017 |
VI |
CMM Level II | 134 |
2014 - 2018 |
II |
C Programming | 140 |
2012 - 2016 |
VI |
CRE -O | 144 |
2013 - 2017 |
V |
CMM | 140 |
2013 - 2017 |
V |
ANSYS | 140 |
2012 - 2016 |
VI |
Hands on training (UG CAM +CNC +EDM) | 142 |
Professional Society
MECHLADOZ Association
MECHLADOZ of Mechanical Engineering Department is an organization formed by the students that works for the students since 2010. The basic aim of MECHLADOZ is to enrich students with different qualities to add dimensions to their personality so that every student emerges as multifaceted engineer in the society. Every Mechanical Engineering student at the start of the second year is a member of MECHLADOZ. Mentored by the faculty members of the Mechanical Engineering department, students take upon many initiatives that prepare them to face the challenges of the future. MECHLADOZ brings about the technical development of students by organizing seminars, workshops, conferences, industrial visits and other activities and also to improve non-technical abilities of students. MECHLADOZ seeks to be an active organization of Dr.N.G.P. Institute of Technology which promotes the career interests of the students.
Office Bearers - Academic Year 2021-22
Name | Register No | Responsibilities | Year / Section |
---|---|---|---|
Koushik Raj K | 710718114029 | President | IV |
Suraaj Sankar CP | 710718114054 | Secretary | IV |
Gokula Krishnan N | 710719114011 | Joint Secretary | III |
Sreejith S | 710718114051 | Treasurer | IV |
Ponbala Sivasankar N | 710718114039 | Executive Member | IV |
Rohith V | 710718114308 | IV | |
David Teddy Samuel T | 710719114005 | III | |
Gokul krishnan B | 710719114012 | III | |
Deivalakshmi R | 710720114006 | II | |
Nammeth S | 710720114323 | II |
Duties and responsibilities of office bearers
Student President
- Supervising all student association meetings.
- Overseeing the process of student organization event planning.
- Completing all student organization purchase requests.
- Maintaining a current list of email address and mobile numbers of the Association office bearers .
- Submitting a detailed report on association activities at the end of every semester.
- Coordinating with secretary, treasurer, and other executive council members of the association and maintain discipline among the students
Student secretary
- Supervising student association meetings in the absence of the President .
- Assisting the President with the oversight of the student association including fundraising, event planning, etc.
- Working with the student association treasurer to prepare an annual budgets.
- Scheduling locations for meetings and events.
- Coordinating with the Treasurer in association fund raising efforts.
- Coordinating with other bearers and executive council members of the association and maintain discipline among the students.
Student treasurer
- Preparation of students association annual budget.
- Monitoring the budget.
- Submission of annual financial report.
- Tending to the status of all purchase requests.
- Collection of association fund from all the students and deposit in the students association account.
- Payment of bills.
- Keeping records for all financial transactions.
- Preparation of monthly financial report and documents and inform about the financial status.
Student joint secretaries
- Establishing duties of the president, and secretary.
- Coordination with the office bearers of the association in performing various association related activities.
- Coordination with the executive council members of the association in performing various association related activities.
- Developing and administering the student association budget.
- Fund raising from external agencies.
Association Activities
Date | Event/Programme | Topic | Chief Guest, Designation | |
---|---|---|---|---|
Academic Year 2021-2022 | ||||
05/05/2022 | CSIR Sponsored One Day National Level Seminar on “Bio-Tribology and Nano Tribology for Medical and Industrial Applications” | Tribology in Manufacturing & Industrial Systems |
Dr.LEO DEV WINS K Professor Department of Mechanical Engineering Karunya Institute of Technology and Sciences Coimbatore- 641114 |
|
Bio-Tribology |
Dr.SHANKAR S Professor Department of Mechatronics Engineering Kongu Engineering College Erode -638060 |
|||
Tribology for Nano Materials |
Dr.YOGANANDH J Associate Professor Department of Mechanical Engineering Sri Ramakrishna Engineering College Coimbatore – 641 022 |
|||
25/04/2022 | Faculty Development Program | Five Days FDP on "Product Design Engineering using Fusion 360" |
Mr.S R Deviyaprasanth Senior Technical Trainer ICT Academy |
|
29/04/2022 | ||||
21/04/2022 | Webinar | Challenges and Opportunities in next generation Industries |
Mr.P.Saravanakarthik, Managing Director, Robotica FA solutions, Coimbatore. |
|
05/04/2022 | Guest Lecture | Metallurgy for Mechanical Engineers |
Dr.C.Vanitha, Associate Professor, Department of Metallurgical & Material Engineering · National Institute of Technology, Warangal - 506004, Telangana, INDIA |
|
10/03/2022 | International Conference | AICTE sponsored International conference on Design, Manufacturing and Materials Engineering |
1. Dr.S.Mahto Professor & Head, NERIST, Nirjuli. 2. Dr.C.Pandivelan Asso. Professor,VIT University, Vellore. 3. Dr.B.Singaravel Professor, Vignan Institute of Technology, Hyderabad. 4. Dr. D.Chakradhar, Associate Professor, IIT Palakad. 5. Dr.A.K.Sahoo, Director, Kalinga Institute of Sciences, Odisha. 6. Dr. C.Sathyanarayanan, Associate Professor, NIT Trichy. 7. Dr.T. Niranjan,Asso. Prof, MGIT, Hyderabad. 8. Dr. M.Giriraj,Associate Professor, VIT Univesrity, Vellore. 9. Dr.M.Chandraekharan, Professor / Mech NERIST, Nirjuli. 10. Dr.K Rameshkumar, Professor and Vice-chairperson (UG), Amrita School of Engineering, Coimbatore, Tamilnadu. 11. Dr.Ambirish Maurya, Asso. Prof National Institute of Technology, Patna. 12. Dr.KM. Senthilkumar, Professor / Mech Engg Kumaraguru College of Technology, Coimbatore, Tamilnadu. 13. Dr.K.Maniraj, Professor, Kalaignar Karunanidhi Institute of Technology, Coimbatore. 14. Dr.TV .Arjunan, Professor and Head,, Guru Ghasidas Viswavidyalaya (Central University), Bilaspur (C.G). |
|
03/01/2022 - 08/01/2022 | ONLINE SIX DAYS FDTP on "ME8692" - "FINITE ELEMENT ANALYSIS" | Introduction to Finite Element Analysis |
Dr.T.Ramesh, ASP-MECH, NIT Tiruchirapalli |
|
2D Scalar variable Problems |
Dr.S.Senthil Kumar, Associate Prof. - Mechatronics, Akshaya College of Engineering and Technology, Coimbatore |
|||
Isoparametric Formulation |
Dr.K.Venkatesh Raja, ASP-MECH, Sona College of Technology, Salem |
|||
2D Scalar variable Problems |
Dr.M.Thirumalai muthukumaran, AP II - MECH, Kumaraguru College of Technology , Coimbatore |
|||
2D Scalar variable Problems |
Dr. K.S.Vijay Sekar, Prof. & Head-MECH, Sri Sivasubramaniya Nadar (SSN) College of Engineering, Kalavakkam |
|||
2D Vector variable Problems |
Dr.M.Thirumalai muthukumaran, AP II - MECH, Kumaraguru College of Technology , Coimbatore |
|||
Introduction to CAE Techniques for new product design |
Dr.M.Piramanandhan, Sr.Engg Manager-R&D ESAB India (p) Ltd, Kancheepuram |
|||
One Dimensional Problems |
Dr.Vidya Chandran, ASP-MECH, SCMS School of Engineering and Technology, Ernakulam |
|||
Variational Formulation of Boundary Value Problems - Weighted residual methods |
Dr. P. Nandakumar, ASP-MECH, SRM Institute of Science and Technology (Deemed to be University), Kattankulathur |
|||
Isoparametric Formulation |
Dr.K.Venkatesh Raja, ASP-MECH, Sona College of Technology, Salem |
|||
Basic concepts of the Finite Element Method – Ritz Technique |
Dr.G.Suresh Kannan ASP-MECH, Coimbatore Institute of Technology, Coimbatore |
|||
Introducing ANSYS Classic approach to problems on 1D & 2D elements |
Dr Mangesh S Kotambkar, AP-MECH, Visvesvaraya National Institute of Technology, Nagpur |
|||
Introducing ANSYS Classic approach to problems on 3D elements |
Dr Mangesh S Kotambkar, AP-MECH, Visvesvaraya National Institute of Technology, Nagpur |
|||
2D Vector variable Problems |
Dr.M.Thirumalai muthukumaran, AP II - MECH, Kumaraguru College of Technology , Coimbatore |
|||
One Dimensional Problems |
Dr.Vidya Chandran, ASP-MECH, SCMS School of Engineering and Technology, Ernakulam |
|||
Emerging Pedagogy |
Dr. S.Renukadevi, Prof - Engineering Education, Head-Centre for Academic studies and Research, NITTTR, Chennai |
|||
18/12/2021 | Guest Lecture | Application of Thermodynamics in Automobile |
Mr.V.Sreenivasan, Diagonistic Engineer, Robert Engineering and Business Solutions Private Limited, Banglore |
|
30/11/2021 | Workshop | One day Workshop on “Designing & Draughting of Mechanical – Electrical – Plumbing (MEP)” |
Mr.V.Jayaprakash - Senior Designer Mr.C.Sandeep Ajeeth Raja - Operations Head AGHORA Design Academy - Coimbatore |
|
27/11/2021 | Virtual Training | Virtual Design Now Workshop in Autodesk Fusion 360 |
Mr. S.R.Deviyaprasanth Senior Technical Trainer Training and Development ICT ACADEMY Chennai. |
|
25/11/2021 | Webinar | Online Webinar on " ADVANCEMENT IN POLYMERIC COMPOSITES FOR ARMOUR APPLICATIONS" |
Dr. J. Naveen, Senior Assistant Professor, School of Mechanical Engineering, VIT University, Vellore. |
|
22/11/2021 | Webinar | Online Webinar on "Advances in Welding Processes" | Dr.M.Venkatesen, QA/QA - Mechanical, Head Quaters, B&F IC , L&T Constructions, Chennai |
|
19/11/2021 | Webinar | Online Webinar on "Challenges and Opportunities in Mechanical Engineering Industries" | C. Puliyurudayan Managing Director, Cleartek Filters Pvt ltd, Coimbatore |
|
18/11/2021 | Webinar | Online Webinar on "Internet of Things in Mechanical Engineering” | Mr.T.Saravana Prabhu Senior Software Engineer, Cognizant Technology Solutions, Coimbatore. |
|
13/11/2021 | Webinar | One Day Webinar on "Advanced Materials Characterization Techniques" by Smart Manufacturing Club | Dr.M.Veena, Dr.D.S.Kothari Post Doctoral Fellow, Department of Nano Science and Technolgy, Bharathiyar University, Coimbatore. |
|
08/11/2021 | Webinar | Online Webinar on "Recent Advances and Scope of Autodesk Fusion 360 in Additive Manufacturing" | Mr.Rohit Chandran, Educatio Engagement Specialist, Autodesk India. |
|
25/09/2021 | Webinar | One Day Webinar on "Industrial Automation with its Applications" in Association with Smart Manufacturing Club, Dr.N.G.P.ITech | Mr.Sriram Nagarajan, CEO, ROBORAM Private Limited, Nagercoil |
|
25/09/2021 | Seminar | One Day Seminar on "PLANNING OF EXPERIMENTS" | Dr.S.Balasubramanian Associate Professor / Mechanical Engineering Kumaraguru College of Technology, Coimbatore |
|
25/09/2021 | Workshop | One Day Workshop on "Impact of CAD CAM Softwares in Industry 4.0" | Mr.S.Pratheep, CAD Engineer, CADD Technologies, School of Design Private Limited, Coimbatore |
|
23/09/2021 | Online Quiz Competition | Online Quiz | Smart Manufacturing Club, Dr.N.G.P. ITech |
|
28/08/2021 | ASSOCIATION INAUGURATION of "MECHLADOZ" | ASSOCIATION INAUGURATION | Mr.A.Natarajan Head – Materials, SAMUDRA Pumps, Coimbatore |
|
Academic Year 2020-2021 | ||||
14.06.2021 | National E-Conference | National E-Conference on “Recent Advancements in Design, Automation and Intelligent” – “RADAIS-2K21” |
Dr.R.K.Elangovan Director General, Director General, DGFASLI, Ministry of Labour and Employment, Government of India, Mumbai – 400022. |
|
02.06.2021 to 04.06.2021 | Three Days online on FDP on Application of Artificial Intelligence in Mechanical Engineering | AI : Opportunities and Challenges |
Dr DEEPAK GARG Director leading India.AI & NVIDIA-Bennett Center of Research on Artificial Intelligence, Bennett University, Greater Noida, Uttar Pradesh, INDIA |
|
An Intelligent COBOTIC System in Smart Manufacturing |
Dr. KAUSHIK KUMAR Associate Professor, Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi, Jharkhand, INDIA |
|||
Application of soft computing algorithm and its scope in the research |
Dr. S.K. TAMANG Assistant Professor, Department of Mechanical Engineering, North Eastern Regional Institute of Science and Technology, Arunachal Pradesh,INDIA. |
|||
AI Techniques in Industrial Automation Environment |
Mr. SRIRAM NAGARAJAN CEO, ROBOARM , Nagercoil |
|||
Intelligent Vibration Signal Processing for Condition Monitoring. |
Dr. KAUSHIK KUMAR Associate Professor, Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi, Jharkhand, INDIA |
|||
Application of Data Science Analytics |
Mr.Manoj Singh Sr Analytical Training Consultant, SAS R&D (India) Pvt. Ltd,Bandra (East), Mumbai. |
|||
27.05.2021 to 26.06.2021 | One Month Online GATE Training Programme | GATE Training Programme |
Mr.Gaurav Lohar trainer, THE GATE ACADEMY, Coimbatore. |
|
26.05.2021 to 27.05.2021 | Two Days Virtual Workshop on “AUTODESK FUSION 360” | AUTODESK FUSION 360 |
Mr. AADITHYA S B Chief Software Operations-Manufacturing, USAM CADSoft India Pvt.ltd., Coimbatore-641012 |
|
24.05.2021 to 29.05.2021 | CENTRE FOR FACULTY DEVELOPMENT ANNA UNIVERSITY SPONSORED ONLINE SIX DAYS FACULTY DEVELOPMENT TRAINING PROGRAMME on MF8071 ADDITIVE MANUFACTURING (R 2017) | Overview – Need - Development of Additive Manufacturing Technology -Principle – |
Dr.Rajesh Ranganathan Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore. |
|
AM Process Chain- Classification –Rapid Prototyping- | ||||
Drop on Demand mode – Three Dimensional Printing – Advantages Droplet formation technologies – Continuous mode |
Mr.Mohammed Basheer Managing Partner, INSTA3D Technologies LLP Coimbatore, Tamil Nadu. |
|||
AM unique capabilities – DFAM for part quality improvement |
Dr.D.Balaji Assistant Professor (SL.G), Department of Mechanical Engineering, KPR Institute of Engineering & Technology, Coimbatore, |
|||
Design tools: Data processing - CAD model preparation – Part orientation and support structure generation |
Dr.G.SivaKumar Assistant Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore 641 014, Tamil Nadu |
|||
Model slicing –Tool path generation- Design for Additive Manufacturing: Concepts and objectives- | ||||
Customized design and fabrication for medical applications |
Dr.R. Suresh Jayabalan Department of Neuro Surgery, Kovai Medical Center and Hospitals, Coimbatore. |
|||
Photo polymerization: SLA-Photo curable materials – Process - Advantages and Applications |
Manjaiah M Professor, Department of Mechanical Engineering, National Institute of Technology, Warangal. |
|||
Powder Bed Fusion Techniques | ||||
SLS-Process description – powder fusion mechanism |
Dr. Anbuudayasankar Professor, Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Coimbatore. |
|||
Process Parameters – Typical Materials and Application. Electron Beam Melting | ||||
Extrusion Based System: FDM-Introduction – Basic Principle – Materials – Applications and Limitations |
Dr. S. Kanmani Subbu Assistant Professor, Department of Mechanical Engineering, IIT, Palakkad. |
|||
Bioextrusion. Sheet Lamination Process:LOM- Gluing or Adhesive bonding – Thermal bonding. | ||||
Outcome Based Education |
Dr.Poorachandra Director, Sri Shakthi Institute of Engineering & Technology |
|||
Rapid Tooling – Rapid Manufacturing – Applications Benefits |
Dr. Y. Ravi Kumar Professor, National Institute of Technology, Warangal. |
|||
Case studies | ||||
Bioplotter - Beam Deposition Process |
Mr.Mahesh Business Manager, V Engineering Solution & V Dent Labs, Erode |
|||
LENS- Process description – Material delivery – Process parameters – Materials – Benefits – Applications. | ||||
10.05.2021 to 14.05.2021 | A Five Days Online Faculty Development Programme on “Novel Materials and Manufacturing Processes in Industrial Applications” |
|
Dr.T.Saravana Kannan Senior Lecturer, Faculty of Engineering, Computing & Science, Swinburne University of Technology, Malaysia. |
|
|
|
|||
Additive Manufacturing |
Dr.R.S.Kanmani Subbu Assistant Professor, Department of Mechanical Engineering, IIT, Palakkad, Kerala. |
|||
Methods for Manufacturing Medical Implants |
Dr.R.Ranjith Assistant Professor, Department of Mechatronics Engineering, SNS College of Technology, Coimbatore, Tamilnadu. |
|||
Preparation and Characterization of Aluminium Matrix Composites |
Dr.C.Samson Jerold Samuel Associate Professor, Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore |
|||
Vision for Material Synthesis Freedom using Additive Manufacturing - A walkthrough |
Dr.D.Balaji Assistant Professor (SL.G), Department of Mechanical Engineering, KPR Institute of Engineering & Technology, Coimbatore. |
|||
Recent Advancements in Additive Manufacturing Processes |
Dr.M.Thirumalai muthukumaran Assistant Professor II, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore |
|||
Friction Stir Technologies |
Dr.R.Sathishkumar Assistant Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore. |
|||
Biomaterials and its Applications |
Dr.D.Velmurugan Associate Professor, Department of Mechanical Engineering, Muthayammal Engineering College, Rasipuram, Tamilnadu |
|||
Additive Materials |
Dr.G.Sivakumar Assistant Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore, Tamilnadu. |
|||
28.04.2021 to 30.04.2021 | Online Faculty Development Program on “Research Prospects in Mechanical & Allied Engineering” | Preparing a Research Manuscript for Scholarly Publications |
|
|
Composite Materials – Research Perspective |
Dr.M.Makesh Kumar Assistant Professor Department of Mechanical Engineering KPR Institute of Engineering & Technology Coimbatore. |
|||
Recent Advancements in Additive Manufacturing |
Dr.V.Ezhilmaran Assistant Professor (Sr.Gr) Department of Mechanical Engineering MEPCO SCHLENK Engineering college , Sivakasi. |
|||
Intellectual Property – A Tool for Revenue from Research |
Mr.Prem Charles Inanse IP & Consultancy Services Managing Director Allinnov R&D. (P). Ltd., India |
|||
Applications of CFD in Renewable Energy Research |
|
|||
Research Prospects in Welding Processes |
Dr.M.Sowrirajan Associate Professor Department of Mechanical Engineering Coimbatore Institute of Engineering & Technology, Coimbatore. |
|||
15.02.2021 to 19.02.2021 | AICTE sponsored one week on line short term training program on “Innovation in Materials and Industrial Automation” (Phase-III) | Flexible Manufacturing Systems (FMS) |
Dr.M. CHANDRASEKARAN Professor/Mech North Eastern Regional Institute of Science and Technology Arunachal Pradesh |
|
Robotic solution for Agriculture |
Dr. PASUPATHY S A Professor & HOD Department of Control systems and robotics Kumaraguru College of Technology Coimbatore, Tamil Nadu 641049 |
|||
Material Characterization |
Dr.Vijay S J Associate Professor, Department of Mechanical Engineering, Centre for Research in Metallurgy, Karunya Institute of Technology and Sciences, Coimbatore - 641114 |
|||
Materials Joining and additive manufacturing |
Dr.S. Jerome Assistant Professor Metallurgical and Materials Engineering NIT,Trichy |
|||
Development of Surface Composites |
Dr.R.Sathiskumar Assistant Professor Department of Mechanical Engineering Coimbatore Institute of Technology, Coimbatore-641014 |
|||
Development of Magnesium composite |
Dr Srinivasan A Principal Scientist CSIR – National Institute for Interdisciplinary Science and Technology (NIIST) Council of Scientific & Industrial Research (CSIR), Ministry of Science and Technology, Govt of India . Industrial Estate PO, Thiruvananthapuram, Kerala 695019 |
|||
Robotic Welding |
Dr.N.Mururgan Professor, Robotics and Automation P S G College of Technology, Coimbatore 9751824123 drnmurugan@gmail.com |
|||
Surface Treatment on Materials |
Dr.V.MUTHUKUMARAN Professor/Mech, Kumaraguru College of Technology, Coimbatore-641049 |
|||
Industrial Automation |
Dr.M.Piramanandhan Manager-R&D(ESD) ESAB India (p) Ltd, Chennai |
|||
Optimization Techniques |
Dr. R. Parameshwaran Chief Coordinator (TBI & IIC) Professor, Mechatronics Engineering Kongu Engineering College, Perundurai- 638060 |
|||
3D Printing Technologies and its characteristics |
Mr.Joseph Mathew Managing Director, INSTA3D TECHNOLOGIES LLP, Ramanathapuram, Coimbatore - 641 045. |
|||
14.12.2020 to 19.12.2020 | AICTE sponsored one week on line short term training program on Innovation in Materials and Industrial Automation (Phase-II) | World of Artificial Intelligence | Dr. N.Dharmaraj Team Lead &Senior Analyst, Hubbell India. Burndy Technology & Global Service Pvt.Ltd, Chennai Dharmaraj.N@gmail.com Mobile: 9962992597 |
|
Advanced Joining process in Industrial applications | Dr.M.V.Venkatesan QA/QC -Mechanical, HQ, B&F IC, L&T Construction, Chennai. mvv@lntecc.com Mobile: 8754471176 |
|||
Materials and Joining process in Nuclear Industry | Dr.B. Arivazhagan Scientific Officer -E, Materials Technology Division, Indira Gandhi Centre for Atomic Research, Kalpakkam-603102 9840163347 arivu@igcar.gov.in |
|||
Annealing effect on Selective Laser Melted Ti-6al-4v Alloy | Dr.C.Vanitha Associate Professor, Dept. of Met. & Mate. Engg. NIT Warangal, TS Mob:8332969385 vanitha@nitw.ac.in |
|||
Characterization of Insitu composites | Dr.A.Mahamani Professor, Sri Venkateswara College of Engineering and Technology, Chittoor 517127,(A.P) 6300256313 mahamanisudhan@gmail.com |
|||
IOT for Industrial Automation | Dr. A. Prasanth Young Scientist & Assistant Professor, PSNA College of Engineering and Technology. 9159686372 draprasanthdgl@gmail.com |
|||
Process innovation in Manufacturing of composite materials | Dr.R.Sasikumar Director - Research , Selvam College of Technology, Namakkal. 9443874292 sasi_kalipatty@yahoo.co.in |
|||
Robotic spot welding for automotive application | Dr.K.Asokkumar Additional General Manager & Deputy Head, Centre of Excellence in Welding Engineering and Technology, PSG College of Technology Peelamedu,Coimbatore. 94426 49147 Email: agm.coew@psgtech.ac.in, kasokku@gmail.com |
|||
Materials for Aerospace applications | Dr. Govindaraju M Assistant Professor, Mechanical Engineering, Amrita School of Engineering, Coimbatore. 9440727051 m_govindaraju@ch.amrita.edu |
|||
Material characterization | Dr.G. Suganya Priyadharshini Assistant Professor, Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore. 9843980133 suganyapriyadharshini.g@cit.edu.in |
|||
Research scope in Metal Additive Manufacturing | Dr T Ram Prabhu Deputy Director / Scientist, DRDO, Bengaluru, Mob: 9535531407 ramprabhu.t@gmail.com |
|||
19.10.2020 to 23.10.2020 | AICTE sponsored one week on line short term training program on Innovation in Materials and Industrial Automation (Phase-I) | Innovation in Materials | Dr. S. Kanmani Subbu Assistant Professor, Mechanical Engineering, Indian Institute of Technology, Palakad, Kerala 678557. sksubbu@iitpkd.ac.in |
|
Light Weight Materials-Formability | Dr.D. Ravi Kumar Professor, Department of Mechanical Engineering, Indian Institute of Technology, Delhi Hauz Khas, New Delhi 110016. Digavalli.Ravi.Kumar@mech.iitd.ac.in dravi.iitd@gmail.com |
|||
Surface Coating on Materials | Dr.Ramesh M R Associate Professor /MECH, National Institute of Technology Karnataka, Surathkal P. O. Srinivasnagar, Mangalore - 575 025 Karnataka, India. rameshmr @ nitk.edu.in ramesdmt@ gmail.com |
|||
Different joint configuration by Friction Welding | Dr. P.Sathiya Professor, Department of Production Technology, National Institute of Technology ,Trichy- 620015 psathiya@nitt.edu |
|||
Wire Arc Additive Manufacturing | Dr.N.Mururgan Professor, Robotics and Automation, P S G College of Technology, Coimbatore drnmurugan@gmail.com |
|||
Metal 3D Printing- Challenges | Dr. V. ANANDAKRISHNAN Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirappalli - 620 015. krishna@nitt.edu |
|||
Rubber-Nano composites | Dr.P.Jawahar Assistant Professor, Department of Mechanical Engineering National Institute of Technology, Agartala, Tripura-799046 Dr.p.jawahar@gmail.com |
|||
Modeling of Smart materials-Piezo electrics | Dr. Jayabal K Associate Professor, Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram- 600 127. jayabal@iiitdm.ac.in |
|||
Development FSW Process | Dr. Ramachandran K K Professor, Department of Mechanical Engineering, Government Engineering College, Thrissur, Kerala. kkramachandran@gectcr.ac.in |
|||
Information in Digital Manufacturing | Dr.Sivasakthivel P S Associate Professor, Sastra Deemed University, Thanjavur-613401. sivasakthivelmech.sastra.edu |
|||
Application of Friction Stir Processing Technology | Dr.R.Sathiskumar Assistant Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore-641014. sathiskumar.r@cit.edu.in |
|||
19.10.2020 to 23.10.2020 | AICTE TRAINING AND LEARNING (ATAL) sponsored Faculty Development Program on "Exploring Additive Manufacturing in Healthcare Applications" | Inauguration Additive Manufacturing in Health Care - with Live Case Studies | Dr.Rajesh Ranganathan Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore. |
|
Future Technology in 3D Printing | Dr.M.Senthilkumar Dean – Incubation Center, Bharath Institute of Higher Education & Research, Chennai |
|||
Data Collection and Analysis for Healthcare Applications | Dr.L.Ashok Kumar Professor & Associate HoD, Department of Electrical Engineering, P.S.G. College of Technology, Coimbatore. |
|||
Application of 3D printing for Dentistry | Mr. Arivazhagan Pugalendhi Project Manager, Centre of Excellence for Manufacturing Science (COE), Coimbatore Institute of Technology, Coimbatore |
|||
3D Printing Technology for Medical Applications | Dr.A.Pasupathy Professor & HoD, Department of Electronics & Communication Engineering, Kumaraguru College of Technology, Coimbatore |
|||
Additive Manufacturing in Complex Oral & Maxillofacial Surgeries | Dr.Y.Ravikumar Associate Professor, Department of Mechanical Engineering NIT Warangal, Telangana |
|||
Looking at Additive Manufacturing in a different dimension. | Dr.Rajesh Ranganathan Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore |
|||
Additive Manufacturing for Diabetic Foot | Dr.G.Sivakumar Assistant Professor, Department of Mechanical Engineering Coimbatore Institute of Technology, Coimbatore |
|||
3D Printing for Retinal Organs | Mr. Arivazhagan Pugalendhi Project Manager, Centre of Excellence for Manufacturing Science (COE) Coimbatore Institute of Technology, Coimbatore |
|||
Additive Manufacturing in Dental Prosthetics | Mr.D.Mahesh CEO VDENT LABS, Erode. |
|||
Fitness Modifications for Bodily Processes | Dr.R.Annadurai Associate Professor, Department of Physical Education Bharathiar University, Coimbatore |
|||
10.10.2020 | Association Inaugural | Industrial Safety | Mr.P Janarthanam Additional Chief Inspector of Factories (Rtd), Tamil Nadu Govt. Factories Inspectorate Service. |
|
09.07.2020 to 11.07.2020 | Virtual Conference on Future Journey of Mechanical Engineering | Future Journey of Mechanical Engineering | Dr.Mylsamy Annadurai Scientist ,Vice President, Tamilnadu State Council for Science and Technology, Chennai - 600025 |
|
Role of Sustainable energy in the Present Indian Context and Opportunities for mechanical Engineers | Dr.Prawin Angel Michael Associate Professor, Department ofElectrical and Electronics Engineering, Karunya Institute of Technology and sciences Coimbatore -641114 |
|||
Safety with Robots | Dr R.K Elangovan Director General, Ministry of Labour and Employment, Government of India |
|||
Applied Machine Learning in the field of Mechanical Engineering | Mr K Nagarajan Head of Machine Learning ,CoE, Tata Consultancy Services, Chennai |
|||
Positive Thinking | Ms.Neena Bhaskar Talent Acquisition leader, Greater Asia becton Dickinson, Singapore |
|||
Academic Year 2019-2020 | ||||
21.05.2020 to 24.05.2020 | Faculty Development program on Recent Advancement in Mechanical Engineering | Friction stir welding process | Dr.K.Kalaiselvan Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore |
|
Advanced processing techniques for coating/layers in metal matrix composites | Dr.K.Ravikumar Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore |
|||
Advanced measurement system | Dr.V.Sivaraman Associate Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore |
|||
Digital manufacturing | Dr.B.Shreeram Assistant Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore |
|||
Nature inspired algorithms | Dr.P.Gopikrishnan Assistant Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore |
|||
Composite materials | Dr.R.Thirumalai Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore |
|||
16.05.2020 | Autodesk sponsored Webinar on Energy audition in Industries | Energy audition in Industries | Dr.M.Thirugnanasambambandam Professor, Bannari Amman Institute of technology, Sathyamangalam, Tamil Nadu. |
|
15.05.2020 | Webinar on Scheduling and Sequencing of FMS | Scheduling and Sequencing of FMS | Dr.M.Chandrasekaran Department of Mechanical Engineering, North Eastern Regional Institute of Science & Technology(NERIST), Nirjuli-791109, Arunachal Pradesh. |
|
20.04.2020 to 24.04.2020 | Autodesk sponsored Faculty Development Program on e-content development in education sector | e-content development in education sector | Dr.S.Babu Devasenapati Director, Centre for creativity, SNS College of Engineering Dr. Leo Davis Wins, Professor, School of Mechanical Engineering, Karunya University. |
|
06.03.2020 | CSIR sponsored One Day National Level Workshop on “Emerging trends in Advance Biofuel and Bioenergy for Sustainable Future” | Emerging Trends in Advance Bioenergy | Dr.S.Pugalendhi Professor and Head Department of BioEnergy Tamil Nadu Agricultural University, Coimbatore. |
|
Innovations in Advance Biofuel for Sustainable Future | Dr.S.Niju Assistant Professor Department of Biotechnology, PSG College of Technology Coimbatore. |
|||
Research Areas in Advance Bioenergy & BioFuels | Dr.K.Ramesh Associate Professor, Department of Mechanical Engineering, Government College of Technology, Coimbatore. |
|||
13.09.2019 | One Day National Level Workshop on “ Manufacturing Strategies towards Sustainable Future” | Industry Ecology & Importance of Inverse Manufacturing | Dr. P P Nihil Raj, Assistant Professor / Department of Chemical Engineering & Materials Science Centre for Sustainable future Amrita School of Engineering, Coimbatore | |
Sustainable Value Creation | Dr. MayaMaajan, Associate Professor, Department of Chemical Engineering, Amrita School of Engineering, Coimbatore. | |||
Emerging Trends in Manufacturing Management | Dr.R Muruganandham, Professor MBA PSG Institute of Management, Coimbatore | |||
19.09.2019 to 20.09.2019 | ICMR Sponsored Two Day Translational Research Workshop on “Design and Fabrication of Patient Friendly Custom Medical Products by Additive Manufacturing Process” | Introduction to AM & 3D Printing for Medical | Dr. RajeshRanganathan, Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore. | |
Role of AM in surgery | Dr. R Suresh Jayabalan, Department of Neuro Surgery, KMCH, Coimbatore | |||
Hands on session Computer Aided Design, Scanning and Slicing Demo on 3D pen | Mr. Mohammed Basheer, Managing Partner, INSTA3D Technologies LLP, Coimbatore. | |||
Ethical Issues related to 3D Printing for Medical Applications | Dr. G Sivakumar, Assistant Professor, Coimbatore Institute of Technology, Coimbatore. | |||
Material Design and Processing Emergence of 3D Printed implants; Biomaterials for 3D Printing, Dental Applications | Mr. Mahesh, Business Manager, V Engineering Solution & Dent Labs, Erode. | |||
Hands on session on 3D Printing | Mr. Joseph Mathew, Managing Partner, INSTA3D Technologies LLP, Coimbatore | |||
04.10.2019 to 05.10.2019 | ICMR sponsored Two Days Translational Research Workshop on “Biochemical Characterization of the Cell – Biomaterial Interface for Medical Implants” | Introduction to Biomaterials and its Characterization | Dr. A Arockiarajan, Professor, Department of Applied Mechanics, IIT Madras, Chennai. | |
Cell – Scaffold Interactions in the Bone Tissue Engineering Triad | Dr. K Swaminathan, MD (UK) FRCP(UK), Consultant Dialectologist & Endocrinologist, KMCH, Coimbatore. | |||
In-Vitro Characterization of Cell – Biomaterial Interaction | Dr. K R Muthusami, Chief Biochemist, KMCH, Coimbatore. | |||
Tissue Engineering | Dr. B Padmapriya, Associate Professor, Department of Biomedical Engineering, PSG College of Technology, Coimbatore. | |||
Structural and Mechanical Characterization | Mr. V Suganthan, Assistant Professor, Centre for Biomaterials, VIT University, Vellore. | |||
Prediction of Patient – Specific Tissue Engineering Scaffolds | Dr. Jaseer Muhammed, Scientist- B (Biochemistry Division), ICMR – National Institute of Occupational Health, Banglore. | |||
01.08.2019 | CSIR Sponsored One day National Level Workshop on “Recycling and Industrial Waste Management for Sustainable Waste Management” | Advances in Recycling & Industrial Waste Management | Dr.Shankar Congeevaram, CEO – VP, Integrated Waste Management Association Chennai | |
Innovative Strategies for Waste Separation and Disposal | Dr.J.Jeyanthi, Professor & Head Department of Environmental Engineering Government College of Technology Coimbatore | |||
Energy Generation from Industrial Waste | Dr.A.Manimekalan, Professor, Department of Environmental Science Bharathiar University Coimbatore | |||
29.07.2019 | Association inauguration | Vehicle safety | Dr.Saravanakumar Subramanian Volvo Cars Corporation, Sweden. | |
18.07.2019 | CSIR Sponsored One day National Level Workshop on “Innovations in Renewable Energy & Clean Energy Production for Resilient Future” | Innovations in Renewable& Clean Energy | Dr.V.Prasanna Moorthy, Professor & Head, Department of EIE Engineering Government College of Technology Coimbatore | |
Emerging Trends in Solar based Systems | Dr.S.Balaji, Assistant Professor, Department of Mechanical Engineering Kumaraguru College of Technology Coimbatore | |||
Advanced Smart Grid and Electric Vehicles | Dr.N.Vinoth Kumar, Assistant Professor Department of Electrical and Electronics Engineering Kumaraguru College of Technology Coimbatore | |||
11.07.2019 | CSIR Sponsored One day National Level Workshop on “Research Challenges and Opportunities in Advanced Computational Fluid Dynamics for Engineering Applications” | Introduction to Advanced CFD | Mr.S.Ramachandran, Assistant Professor, Department of Mechanical Engineering Kumaraguru College of Technology Coimbatore | |
Research Areas in Advanced CFD | Mr.S.Priyant, CFD Application Engineer Innovent Engineering Solution Pvt Ltd Bengaluru | |||
Case Studies on CFD | Mr.S.Thirumurugan, Assistant Professor, Department of Mechanical Engineering Coimbatore Institute of Technology Coimbatore | |||
15.06.2019 | Smart Manufacturing Club - Seminar | Importance of Non Destructive Testing | Mr.V.M.Krishnamoorthi Chief Trainer The Engineers EDGE Institute Of NDT Coimbatore, Tamil Nadu. | |
14.06.2019 | Career Day | Job opportunity for Mechanical Engineers | MrB.Nishanth, Design Engineer, CRAFTSMAN AUTOAMTION (P) LTD, Coimbatore | |
20.05.2019 To 25.05.2019 | Six Days FDTP on ME 8319 (R2017) Engineering Thermodynamics | Basic concepts of Zeorth Law of Thermodynamics | Dr.K.Soorya Prakash Assistant Professor Anna University, Coimbatore |
|
Heat and work transfer & Heat Source, sink | Dr. S. Sundararaj Professor Sri Krishna College of Technology, Coimbatore | |||
Mole and mass fractions, Properties of gas mixtures | Dr.Thiurumurugan Professor Coimbatore Institute of Technology Coimbatore | |||
Application of I law (Hands on Session) & Concepts of entrophy, enthalphy, Compressibility Chart and its use | Dr.Selvam Professor & HoD Dept of Automobile Engineering Nehru College of Engineering Coimbatore | |||
Properties of Steam & Gas, Applications of gas mixtures | Dr. S. Sivakumar (FN) Asst. Professor – III Kumaraguru College of Technology, Coimbatore | |||
Psychrometric Process,
Psychrometric Charts |
Dr. N. Gunasekar (FN) Associate Professor Sri Ramakrishna Engineering College, Coimbatore | |||
Academic Year 2018-2019 | ||||
23.03.2019 | National Conference on Recent Advancement in Design, Automation and intelligent Systems | Inaugural Address | Dr.S.Krishna Kumar, Senior Scientists, DRDO, Chennai | |
28.02.2019 | Seminar (IWS) | Advances in Welding Process | Dr.M.Govindaraju, Professor, Amrita University, Ettimadai Coimbatore-641112 | |
13.02.2019 | Expert Lecture Series | Quality expected by Core Industry From Engineering Graduates | Thiru R.Murugan, United Enterprises, Coimbatore. | |
21.02.2019 | One day National Level workshop on Research Perspectives on “Futuristic Energy Materials and Energy Storing Systems” | Research areas in Energy Storing Systems | Dr.P.Viswanathan, Associate Professor, Department of Mechanical Engineering, PSG College of Technology, Coimbatore |
|
Advanced Manufacturing Technologies for Energy Materials & System s | Dr. R.Rajeswari, Associate Professor, Government College of Technology, Coimbatore. |
|||
Future Integrated Energy Systems | Mr.Rajendran, Manager Kondaas Energy Systems Coimbatore |
|||
Functionally Graded Materials, Smart Materials | Dr.SK Srinivasan, Founder & CEO K S T Wind Engineering India Tiruppur |
|||
13.02.2019 | Expert Lecture Series | Quality expected by Core Industry From Engineering Graduates | Mr.ThiruR.Murugan, United Enterprises,Coimbatore. |
|
18.06.2018 & 19.06.2018 | Faculty Development Program on Advances in FEA and Modern Manufacturing Processes | Importance of Technical Education | Dr. P. R. Muthuswamy Director-Academics, Dr.NGP. Institutions |
|
Modern Manufacturing Processes | KKM software solutions | |||
Advances and Hands on Training in FEA | Mr.R.Ganesh, Innovent Engineering Solutions, Bengaluru. |
|||
06.07.2018 | Carrier Day | 1. Industry expectations from Fresh Engineers. 2. Career Opportunities in Mechanical Engineering | 1. Mr.Pradeep Rajaram Human Resource Titan Company Limited, Coimbatore 2. Dr.V.S.SreeBalaji, Professor and Head Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore. |
|
04.08.2018 | ASSOCIATION INAUGURATION - MECHLADOZ | Shri.M.Shyam Kumar Raghavendran
M.E., Managing Partners, M/s.WarenPars, Coimbatore. |
||
01.09.2018 | Smart Manufacturing Club Inaugural | 1. Need of Smart Manufacturing 2. Role of Design in Manufacturing | 1. Mr. Mohammed Basheer, Managing Partner INSTA3D Technologies LLP, Coimbatore. 2. Mr.Logesh Kumar, Manager ARRIS - CAD Solution, Coimbatore |
|
01.09.2018 | DOE Club Inaugural | DOE | 1. Dr.K.Mylsamy, 2. Dr.K.Kalaiselvan, 3. Dr.R.Thirumalai, Professor, Department of Mechanical Engineering, Dr.N.G.P.Institute of Technology, Coimbatore. |
|
11.09.2018 | One Day National Level Workshop on Industry 4.0 and Smart Manufacturing Strategies |
The essence of Smart Manufacturing and industry 4.0 | Mr. Kumar Gangwani, General Manager, Big Data at ITC Infotech, Bengaluru. |
|
Optimizing Production with Big Data Platforms and Data, Analytics, AI methods and Analysis | Mr. Paul Antony Doss, Senior Manager, Nippon Electric Corporation, Chennai. |
|||
Additive Manufacturing Revolution: Perspective: from Prototype towards mass Production, New materials & Economic aspects. | Dr. Rajesh Ranganathan, Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore. |
|||
Industrial Internet of Things (IIOT) | Dr.Kumar Rajamani , Manager M/s. Robert Bosch Engineering & Business Solutions Ltd., Bangalore. |
|||
04.10.2018 | One Day National Level Workshop on Research Perspectives of 3D Printing & Additive Manufacturing in Medical Applications |
The essence of Additive Manufacturing and 3D Printing in Medical Field | Dr.M.Venkatesan Associate Professor, School of Mechanical Engineering, SASTRA Deemed University, Thanjavur. |
|
Future Personalized Bio Printing (3D Printing of drugs, living cells, tissues, and organs). | Dr.Rajesh Ranganathan Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore. |
|||
Future acellular biomaterials & Models, Guides, and Inert Materials/Implants | Mr.Mahesh Business Manager V Engineering Solution & V Dent Labs, Erode. |
|||
Demonstration of Additive Manufacturing (FDM) & 3D Pen | Mr.Mohammed Basheer Mr.Joseph Mathew Managing Partner, INSTA3D Technologies LLP, Coimbatore. |
|||
11.10.2018 & 12.10.2018 | Two Day National Level Workshop on Biomimetic Medical Device Design Using TRIZ |
Augmented and Mixed Reality for Medical Applications. | Mr. Srinivasan Padmanaban, CEO, Easy Design Systems Pvt. Ltd. Coimbatore. |
|
Creativiy: Innovation : Health Monitoring using Future Technology | Dr. Pinnamaneni Bhanu Prasad, Technical Advisor, KELENN Technology, France |
|||
Bio – inspire design of medical equipment based on TRIZ | Dr. V.S.SreeBalaji, Professor and Head Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore. |
|||
Recent trends in Medical Gas Pipeline System (MGPS) and Modular Occupational Therapy (MOT) | Mr. Arun Kumar Pillai, Chief Executive Officer, GFLOW, Coimbatore. |
|||
Robotic surgery applications in medical field | Dr. Anbukkani Subbian, Obstetrician Gynecologist, KMCH, Coimbatore. |
|||
Advances in Nuclear Medicines through Innovations | Dr. Ajit Shinto, Department of Nuclear Medicine and PET CT, KMCH, Coimbatore. |
|||
Finite Element Methods in Medical Applications | Dr. Shankar Subramaniam, Associate Professor, Mechatronics Engineering, Kongu Engineering College, Perundurai. |
|||
Composite coatings for Medical Applications | Dr. K.Ravi Kumar, Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore. |
|||
16.11.2018 | DST – SERB sponsored One Day seminar of “Processing and Characterization of Multifunctional Green Composite Coating for Medical Equipments and Implants” | Multifunctional Bioceramic Composite Coatings | Dr. T.M.Sridhar, Professor, Department of Analytical Chemistry, University of Madras, Chennai. |
|
Implants in Orthopaedics Applications | Dr. K.Baskaran, Department of Orthopaedics, KMCH, Coimbatore. |
|||
Challenges in Manufacturing in Composites | Dr. V.Anandakrishnan, Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirapalli. |
|||
Imaging Techniques for Nano materials | Dr. N.Selvakumar, Senior Professor, Department of Mechanical Engineering, MEPCO Schlenk Engineering college, Sivakasi, Tamilnadu. |
|||
Thermal spray coating techniques | Dr. K.Ramachandran, Associate Professor, Department of Physics, Bharathiar University, Coimbatore. |
|||
Academic Year 2017-2018 | ||||
25.01.2018 | Guest Lecture | Next Generation of Communication(4G) - An Industrial Transformation | Mr. Paul Antony Doss, Senior Manager, Nippon Electric Corporation, Chennai |
|
20.01.2018 | Workshop | AUTOMOBILE ENGINEERING in association with SAE, Ambal Auto | Ambal Autos, Ramanathapuram, Coimbatore |
|
06.01.2018 | Academic Expert Lecture | Design and Automation trend and need - Automotive industry | Dr.M. Giriraj, Professor, VIT – vellore. |
|
05.01.2018 & 06.01.2018 | Workshop | Advances in Welding and Non Destructive Testing in association with Indian Welding Society | 1. Dr.N.Murugan, Professor of Robotics and Automation Engg. PSG College of Tech, Coimbatore. 2. Mr. N.Rajasekaran Deputy Genaral Manager, BHEL Trichy. 3. Dr.Govindharaju, Professor, Amirtha University, Coimbatore 4. Mr.B. Vignesh, Engineer & Mr.S.Selva Prakash, Proprietor Aurora Institute & Inspection services (AIIS),Coimbatore. 5. Mr.R.Dhamodharan, Director, BIS Group of Companies, Coimbatore. 6. Dr.V.Anandakrishnan, Assistant Professor, National Institute of Technology, Trichy. |
|
30/11/2017 | Faculty Development Program | Emerging Trends in Industry • Creativity and Idea Generation • Attitude & Work Life Balance • Economic Survival on Demonetization and implications of GST • Industrial Automation • Productivity Improvement Techniques |
Dr.Kumar Rajamani Manager M/s. Robert Bosch Engineering & Business Solutions Ltd., Bangalore |
|
03.07.2017 | Alumni Lecture | Awareness Program on GST | Mr. K. Sivasankar, Press Editor Writer, The Hindu, Vadapalani, Chennai |
|
08.07.2017 | Carrier Day | Mr. M. Mahendran, Head . Design, Shanthi Gears Ltd, Coimbatore Mr. S. B. Adithya, Application Engineer, USAMCADSoft pvt Ltd, Coimbatore |
||
17.07.2017 - 18.07.2017 | Workshop | Autodesk Fusion | Mr. S. B. Adithya, Application Engineer, USAMCADSoft pvt Ltd, Coimbatore |
|
11.08.2017 | Guest Lecture | Product Development | Mr.S. Guru Selvaraj, Flow Link Systems (P) Ltd., Uthupalayam, Coimbatore |
|
19.08.2017 | Guest lecture | Industry readiness & employability skills for future | Mr.Maria Antony Juderaj, Dupty Manager – HR, L&D, ELGI Equipments, Coimbatore. |
|
23.08.2017 | Guest lecture | Higher Studies in Abroad | Ms. Krishti Chatterjee, Director of International Recruitment, Embry.Riddle Aeronautical University.Asia |
|
24.08.2017 | Guest lecture | Dynamic analysis on Gears | Mr.R.Mahendiran, Shanthi Gears Limited, A – Unit, Coimbatore |
|
Academic Year 2016-2017 | ||||
02.02.2017 - 03.02.2017 | National Level Seminar | Mechanical Properties, Welding Characteristics And Corrosion Behavior Studies Of Nickel Based Alloy, Inconel 718 For Applications In Marine Environment | Dr.N.Arivazhagan, Dean.SMEC, VIT University, Vellore |
|
27.03.2017 | Workshop | Patient Friendly Health Care Equipments Design Using Triz – An Innovative Technique | Dr. Pinnamaneni Bhanu Prasad, Dr. Anbukkani Subbian, Dr. Kumar Rajamani, Dr.R. Saravanan |
|
20.07.2016 & 21.07.2016 | guest lecture | welding and fabrication | Mr.C.S.Rangarajan Course Coordinator and Placement Officer, Institute of Welding Technology, Coimbatore |
|
22.07.2016 | guest lecture | advances in welding technology and ndt | Mr. r. Thiraviam, Senior Welding Engineer, PDO, Oman |
|
25.07.2016 | guest lecture | robotics | Mr. t. Suresh, Technical Coordinator, Technovation, Coimbatore |
|
15.07.2016 | guest lecture | career opportunities in mechanical engineering | Mr. s. Karaiadiselvan, Managing director, CADD Centre Training Services, chennai |
|
16.07.2016 | guest lecture | recruitment trend in manufacturing companies | Mr. Vignesh Eswaran Manager – HR, Bestomech Industries , coimbatore |
|
16.07.2016 | guest lecture | simulia analysis software and its application in the field of mechanical engineering | Mr. Dileepkumar Assistant Manager. HR, EDS Technologies Bangalore |
|
01.08.2016 | guest lecture | automotive engineering and career prospects | Mr. Mayank arora chief marketing officer Mr. Prashanth Design Engineer, Elite Technologies, mumbai |
|
12.08.2016 | guest lecture | advances in mechanical sciences | Dr. Godson Asirvatham director . centre for research in thermal sciences Dr.Leo Dev Wins, Centre for research, Director . Centre for research in design and Manufacturing, Karunya university, coimbatore |
|
11.08.2016 | seminar | autodesk inventor and autodesk fusion 360 | Mr.S.B.Athithya application engineer, USAM CAD Soft, coimbatore |
|
12.08.2016 | seminar | employability gap | Mr..T.Anand director – sales, 3W Technologies, karaikudi |
|
30.09.2016 | dirt bike event | motovate 2k16 | ||
Academic Year 2015-2016 | ||||
02.02.2016 | Guest Lecture | Product Analysis and Computational Fluid Dynamics | Ms. Sagar Metha,Institute of Industrial Design, CADD Centre | |
18.02.2016 | Guest Lecture | Fundamentals and Applications of Fluid Mechanics & Higher Education Opportunities | Dr. S. Vengadesan, Professor &Head, Applied Mechanics, IIT Madras |
|
24.03.2016 | Guest Lecture | Conference Chair. International conference on Recent Advancements in Design, Automation and Intelligent Systems | Dr. Bhanu Prasad Pinnamaneni, Director (R&D), Kelenn Technology, France |
|
24.03.2016 | Guest Lecture | Guest of Honor . International Conference on Recent Advancements in Design, Automation and Intelligent Systems | Dr.Kua.Anan Techato, Deputy Dean, Research & Academic, Prince of Songkla University, Thailand |
|
24.03.2016 | Guest Lecture | Keynote Speaker. International Conference on Recent Advancements in Design, Automation and Intelligent Systems | Dr.Rajesh Ranganathan, Associate Professor, Mechanical Engineering, CIT, Coimbatore |
|
02.02.2016 | Seminar | Product Analysis and Computational Fluid Dynamics | Dr.N.G.P. IT, Coimbatore | |
18.02.2016 | Seminar | Fundamentals and Applications of Fluid Mechanics & Higher Education Opportunities | Dr.N.G.P. IT, Coimbatore | |
24.03.2016 | International Conference | ICRADAIS 2K16 | Dr.N.G.P. IT, Coimbatore | |
10.07.2015 | Guest Lecture | Validation Techniques in New Product Development | Mr.Ravindra Bandari, Senior Architect, Robert Bosch Engineering and Business Solution Pvt.Ltd, Coimbatore |
|
10.07.2015 | Seminar | Career Opportunities in Mechanical CAD | Mr.A.R.Sathya Narayanan, Managing Director,, USAM CAD Soft India Pvt.Ltd, Coimbatore |
|
10.07.2015 | Guest Lecture | Foundry Technology and its importance in the industry | Mr.V.S.Saravanan, General Manager, Indo Shell Cast Pvt.Ltd, Coimbatore |
|
10.07.2015 | Guest Lecture | Emerging Technologies in Quality Control & Inspection | Mr.Raman Baskaran, Manager, FARO Business Tech India Pvt.Ltd, Chennai |
|
14.08.2015 | Seminar | Career Guidance | Mr.A. Antoine Baskar Manager HRM & C Kirloskar Brothers Limited, Coimbatore |
|
15.09.2015 | Seminar | Role of Engineers | Mr.S.Pandiraj Chief Executive Officer, Apex Design Center, Ganapathy, Coimbatore |
|
14.08.2015 | Career Day | . |
Dr.N.G.P. IT | |
15.09.2015 | Engineers Day | . |
Dr.N.G.P. IT | |
19.11.2015 | Workshop | MS.Office for Non. Teaching Staffs | Mr.A.G.Karthikeyan Mr.K.Kiran Dr.N.G.P. IT |
|
Academic Year 2014-2015 | ||||
26.11.2014 | Guest lecture | Automobile Engineering | Mr.Vivek Venkataraman Lead Industrial Engineer, GMNA Manufacturing, General Motors,USA |
|
19.09.2014 | Workshop | Robotics in Artillery field | Dr.S.Krishnakumar Senior Technical officer, Ministry of Defence, DRDO, Avadi, Chennai |
|
26.08.2014 | Association Inauguration Function | Adolescence Psychology | Dr.B.Selvaraj, Associate Professor, Govt. Arts College, Coimbatore. |
|
26.08.2014 | Association Inauguration Function | Think Mechanical Engineering | Mr. D.Nandakumar, Vice.President, Federation of Indian Chambers of Commerce and Industry |
|
31.07.2014 | Placement Drive for Final Year Students | . | Sysnautix Technologies Coimbatore | |
21.07.2014 To 25.07.2014 |
Value Added Course | Auto CAD Training For 2nd Year ‘A’ Sec | CADD CENTRE. Coimbatore | |
22.07.2014 | Intellectual Industrial Visit for Colleges | Industrial Visit ((For Final Year Students) | Edu2020 .Chennai | |
18.07.2014 | Yoga Class for Faculty | Yoga | Isha Yoga Centre, Coimbatore | |
17.07.2014 To 19.07.2014 |
Value Added Course | Unigraphics Training For Final Year | COINDIA, Coimbatore | |
09.07.2014 To 16.07.2014 |
Value Added Course | ANSYS Training For 3rd Year ‘B’ Sec | Innovent Technology, Bangalore | |
01.07.2014 To 04.07.2014 |
Value Added Course | Soft Skills Development | Hope Factory | |
02.07.2014 To 08.07.2014 |
Value Added Course | ANSYS Training For 3rd Year ‘A’ Sec | Innovent Technology, Bangalore | |
30.06.2014 | Career Day | Challenges faced in core production at industrial floor | Mr.Gangatharan, HR . Head M.s. Shardha Terry Products Pvt. Ltd. |
|
30.06.2014 | Career Day | Today's design technology in mechanical industry | Mr. Manisekhar Rajagopal, Managing Director,M.s. Sysnautix Technologies |
|
30.06.2014 | Career Day | Fresher's preparation to face the industries | Mr.Vimal Francis,HR.Head (Campus Recruitment Division) M.s Elgi Equipments Pvt. Ltd |
|
30.06.2014 | Career Day | Graduates for Mechanical Industry | Mr.N.Visvanathan, Managing Partner (Ammarun Foundries) & President COINDIA |
|
25.06.2014 | One Day Faculty Orientation Programme | Overview on Research Proposals for Funding and Consultancy, Department Existing Practices – Documentation, NAAC.ISO | Dr. S.Muthu, Dr.V.S Sree Balaji, Dr.K.Ravi Kumar, Dr. K. Kalaiselvan |
Society of Automotive Engineers (SAE)
Society of Automotive Engineers (SAE) is an International professional engineering society whose members combine their specialized abilities to further advance the research, development, design, manufacture and utilization of vehicles which operate on land, water, air and space.
Vision
To Continuously Enrich Knowledge Base of Practitioners in Mobility Industry and Institutions in the Service of Humanity.
Mission
- To enhance the knowledge base of members who are mobility practitioners within India
- To provide access to SAE International programs and services globally enabling them to practice world class standard in productivity and quality
- To develop technical and scientific reports and engineering standards for the benefit of mankind
- To provide a forum for members to informally exchange views and ideas
Student Convention
- Student Convention is the group of competitions for SAE MEMBERS conducted every year, which engages large sections of our student members through competitions and events spread over 3 Tiers viz, College level(Tier 1), Divisional level (Tier 2) and Main Convention (Tier 3).
Objectives
- Celebration of Success (of yearlong activities that happen at collegiate clubs)
- Showcasing student abilities(Technical, Design, Fabrication, Problem Solving)
- Experience sharing and networking (belief in collective and fraternal growth)
- Motivating students to take up automotive sciences as career.
- Dr.NGPIT SAE CLUB organizes Student Convention (Tier-I) every year in college premises - Organized divisional level (Tier-2) in our college on 22.08.2015.
Society of Automotive Engineers (SAE) - Activities
Date | Activity | Event | Venue | Chief Guest |
---|---|---|---|---|
Academic Year 2021-2022 | ||||
01/12/2021 | Webinar | Online webinar on "Machine Dynamics" by SAE | Dr.NGP ITech | Dr.Ragavanantham Shanmugam, Assistant Professor, School of Engineering, Math. & Technology, Program Advisor for Advanced Manufacturing Engineering Technology, Navajo Technical University, New Mexico, USA |
July 2020 | - | Personalized air Vehicle - Nuts and Bolts | Sri Sivasubramaniya Nadar College of Engineering | - |
08.02.2019 |
SAE Tier II Events | Student Convention Tier III Competitions Venue : Dr.NGPIT, Academic Block |
Dr.N.G.P.IT | Dr.K.Siva, Chairman SAEISS – Coimbatore Division, Professor –Mechanical Engineering, Hindustan Institute of Engineering and Technology. |
20.01.2018 |
Workshop | "Automotive assembly & Dismatling" | Dr.N.G.P.IT | Trainer from Ambal Autos, Ramanathapuram, Coimbatore |
27.09.2017 |
Dirt Bike Event | MOTOVATE 2K17 | Dr.NGP Institute of Technology, Coimbatore | Mr. Vikram Sekar, National Rally champion |
28.09.2017 - 01.10.2017 |
QUARD TORC RACE | QUARD TORC | S P Degree College, Chandpur, Uttarpradesh. | |
01.09.2017 |
Mini Dirt Bike | Mini Dirt Bike Competition | SNS Tech, Coimbatore. | |
28.08.2017 to 30.08.2017 |
Gokart Design Workshop | Workshop - SAE - LPU Gokart Design Workshop | Bannari Amman Institute of Technology, Sathiyamangalam | |
19.08.2017 |
Trekking | Trecking | Paalamalai Hills, Coimbatore | |
25.02.2017 |
Aeromodeling, Biomimicry, On-Board Diagnostics, Welding, Clay Modelling | Student Convention Tier – III | Kongu Engineering College, Perumdurai | Mr. S. Sriraman Sr. Vice President, TAFE |
28.01.2017 |
Aeromodeling, Welding, Clay Modelling, RC Racing | Student Convention Tier – II | Hindustan College of Engineering and Technology, Coimbatore | - |
19-21.01.2017 |
Aeromodeling, Welding, Clay Modelling, RC Racing | Student Convention Tier – I | Dr.NGP Institute of Technology, Coimbatore | - |
18&19.09. 2015 |
Aeromodeling, Welding, Clay Modelling, Sheetmetal | Student Convention Tier – III | VIT University, Vellore | - |
22.08.2015 |
Aeromodeling, CNC Milling , CNC Turning, Mobile Robotics, Welding, Clay Modelling, RC Racing, Electronics, Sheetmetal, Business Plan presentation, Mechanical Engg Design CAD, Auto Quiz, Manufacturing Tech Challenge | Student Convention Tier – II | Dr.NGP Institute of Technology, Coimbatore | Mr.Krishnam Raju, Bosch |
11,13&14.07.2015 |
Aeromodeling, CNC Milling , CNC Turning, Mobile Robotics, Welding, Clay Modelling, RC Racing, Electronics, Sheetmetal, Business Plan presentation, Mechanical Engg Design CAD, Auto Quiz, Manufacturing Tech Challenge | Student Convention Tier – I | Dr.NGP Institute of Technology, Coimbatore | - |
12.09.2014 |
Student Convention 2014 (Tier - II Competitions) | Regional | Jansons institute of Technology, Coimbatore | - |
22.08.2014 |
Student Convention 2014 (Tier - I Competitions) | Local | Dr.NGP Institute of Technology, Coimbatore | - |
28.06.2014 & 29.06.2014 |
SAE NIS EFFI-CYCLE 2014 Virtual Round | National | Rajalakshmi Institute of Technology, Chennai | Mr.ARJUN PRAKASH, DIRECTOR,EFFICA AUTOMATION, Coimbatore, Tamil Nadu, India |
28.08.2012 |
Student Convention 2012 (Tier - II Competitions) | Regional | Knowledge Institute of Technology, Salem | - |
18.08.2012 |
Student Convention 2012 (Tier - I Competitions) | Local | Dr.NGP Institute of Technology, Coimbatore | - |
23.07.2012 |
SAE Student Chapter Inauguration | Local | Dr.NGP Institute of Technology, Coimbatore | Prof.V.Umasankar, Prof/Mech, VIT University, Vellore Mr. B.Kumaran, Deputy General Manager, Robert Bosch Engineering, Coimbatore |
Indian Welding Society
Indian welding Society (IWS) - Student forum of Mechanical Engineering at Dr.N.G.P. Institute of Technology was started during the academic year 2017-2018 to facilitate exchange of ideas, information, development work related to welding amongst members; by organizing lectures, workshops, seminars, symposia, conferences and development programs; publish periodicals, books, journals, and magazines; and develop software and educational programs.
The Inaugural Function of Indian Welding Society (IWS) - Student forum of Mechanical Engineering Department, Dr.N.G.P. Institute of Technology was held on Friday (05.01.2018) at 10.00am. Mr. N.Rajasekaran Hon. Secretary, Indian Welding Society & Deputy Genaral Manager, BHEL Trichy was inaugurated the function. The Guest of Honor were Dr.N.Murugan, Advisor-IWS (Southern Zone - Coimbatore Centre) & Professor, PSG College of Tech. Coimbatore and Mr.G.Ranjendran , Hon. Treasurer, IWS & Senior Deputy Manager, BHEL, Trichy.
Indian Welding Society Activities
Date | Activity | Event | Chief Guest |
---|---|---|---|
Academic Year 2021-2022 | |||
05/04/2022 | Guest Lecture | Metallurgy for Mechanical Engineers | Dr.C.Vanitha, Associate Professor, Department of Metallurgical & Material Engineering · National Institute of Technology, Warangal - 506004, Telangana, INDIA |
22.11.2021 | Webinar | Online webinar on “Advances in Welding Processes” | Dr M Venkatesan, QA/QC Head, Mechanical, B&F IC, L&T Chennai |
13.03.2020 | Workshop | Introduction to Robotic Arc Welding Process | Dr.N.Murugan, Advisor-IWS (Southern Zone), Coimbatore Centre & Professor of Robotics and Automation Engg. PSG College of Technology, Coimbatore. |
Classification of Welding Consumables | Mr.S.Singaravelu, Former Additional General Manager BHEL Trichy & Vice Chairman IWS / South Zone | ||
Automation in Welding | Mr.M.Jayachadran & Mr.A.Suman, Regional Manager, Fronius India Pvt Ltd, Chennai | ||
Welding of Carbon Steels | N.Parameswaran, Former Sr. Deputy General Manager, BHEL Trichy & Executive Committee Member IWS / South Zone | ||
14.03.2020 | Inspection in Welding and Non Destructive Testing Methods | Mr.S.Selva Prakash Proprietor, Aurora Institute & Inspection Services (AIIS), Coimbatore. | |
Hands on Training & Demonstration using NDT Instruments | |||
Friction Stir Processing Technology | Dr.R.Sathiskumar, Treasurer, IWS (South Zone-Coimbatore Section) & Assistant Professor/Mech, Coimbatore Institute of Technology, Coimbatore | ||
27.02.2019 | Seminar | Advances in Welding Process | Dr. M.Govindaraju Professor –Mechanical Engineering Amrita University, Coimbatore |
Industrial Visit | RK Engineering Works, Coimbatore | ||
05.01.2018 | Workshop | Two Days Workshop on Advanced Welding and Non Destructive Testing Technique | Dr.N.Murugan Advisor-IWS (Southern Zone) Coimbatore Centre & Professor of Robotics and Automation Engg. PSG College of Technology, Coimbatore. |
Weldability of Steels | Mr.S.Singaravelu Vice Chairman Indian Welding Society (Southern Zone) & Additional General Manager, BHEL Trichy. |
||
Gas Welding Process and its Advances | Mr. N.Rajasekaran Hon. Secretary, Indian Weldian Society, & Deputy Genaral Manager, BHEL Trichy. |
||
Stainless Steel-Types and Welding | Mr.G.Ranjendran Hon. Treasurer Indian Welding Society & Senior Deputy Manager ,BHEL, Trichy |
||
06.01.2018 | Advanced joining Techniques | Dr. Govindaraju M.
, Assistant Professor, Dept. of Mechanical Engg., Amrita School of Engineering, Coimbatore |
|
NDT Training, Testing and Inspection | Mr.S.Selva Prakash Proprietor Aurora Institute & Inspection services (AIIS),Coimbatore. |
||
Product Inspection using NDT | Mr.R.Dhamodharan Director BIS Group of Companies, Coimbatore. |
||
Surface Modification using Friction Stir Processing | Dr.V.Anandakrishnan, Assistant Professor, National Institute of Technology, Trichy. |
Coimbatore Productivity Council (CPC)
The Coimbatore Productivity Council (CPC), a non-profit autonomous body, established in 1958 to promote productivity culture in Coimbatore, Tamil Nadu is registered as a society under the societies Registration Act and affiliated to National Productivity Council, New Delhi. Also the first local productivity Council in India.
CPC has built-up extensive expertise in disciplines such us;
- Industrial Engineering
- HRD
- Plant Engineering
- Quality Management
- Energy Management
- Environment Management
Vision
- Promotion of Productivity awareness among employers, employees, trade unions, farmers, student of college & schools.
- Promotion of quality of work life by improving resource utilization and standard of living for the national growth.
Mission
- To stimulate productivity consciousness in industries, corporations and government through rationalization and optimization of resources deployed.
- To avoid and minimize waste in all aspects.
- Promote rural employment and self-employment generation for farmers & rural people.
Coimbatore Productivity Council Activities
S.No | Date | Event/Programme | Topic | Chief Guest, Designation |
---|---|---|---|---|
1 | 09.03.2017 | One day Workshop on “Safety Principles for Productivity Improvement” | Productivity Improvement Technique | Mr.K.Arul, Vice President & Additional Director, Director of Industrial Safety & Health, Govt. of Tamil Nadu |
2 | 25.05.2016 | Signing of MoU | Professional Society Inaugural | 1. Dr. Kavidasan, President, Coimbatore Productive Council. 2. Dr.A.M.Natarajan, Secretary, Coimbatore Productive Council |
Students Achievements/Activities
University Rank Holders
S.No | Name of the Student | CGPA | UNIVERSITY RANK | BATCH |
---|---|---|---|---|
01. | N.Shri Venkatesh | 8.87 |
40 |
2009-2013 |
02. | E.krishna Das | 8.8 |
37 |
2010-2014 |
03. | Kiran.K | 8.32 |
24 |
2013-2015 |
Best Outgoing Students –UG Programme
S.No | Name of the Student | BATCH |
---|---|---|
01. | N.Shri Venkatesh | 2009 - 2013 |
02. | E.krishna Das | 2010-2014 |
03. | T.Partha Sarathy | 2011-2015 |
04. | S.B.Aadithya | 2012-2016 |
05. | B.Vignesh Kumar | 2013-2017 |
06. | M R Velu Srinath | 2014-2018 |
07. | Parinesan T | 2015-2019 |
08. | L Kaaviya | 2016-2020 |
09. | S Danial Arulanandh | 2017-2021 |
Best Outgoing Students –PG Programme
S.No | Name of the Student | BATCH |
---|---|---|
01. | K Kiran | 2013-2015 |
Presentation/ Project Contest/Best Paper Award/Symposiums/Prizes Won
Date | Student(s) Name | Event/Project Title | Organizer/Venue | Prize |
---|---|---|---|---|
ACADEMIC YEAR 2020-2021 | ||||
April 2021 | S.Haribaskar | Indo-Nepal International Championship Cricket Tournament | Nepal youth sports development forum | Gold Medal |
July 2020 | Daniel Arulananth, Nelson Jacob, Niveditha Noble, Sanjay Anandh, Vishnu prasanth | Personalized air Vehicle - Nuts and Bolts | Smart India Hackathon 2020 software edition / Sri Sivasubramaniya Nadar College of Engineering | Fifth rank at the Nodal centre |
ACADEMIC YEAR 2018-2019 | ||||
02.10.2018 | L.Kaaviya | Essay Competition | Gandhian Integrated Forum Trust | II / Received Award from
Tamil Nadu Governor |
09.02.2019 | DEEPAK SANKAR AASHIN P JOHNSON |
CFD Contest | Sri Ramakrishna Engineering College | II |
VIKKRAM A SUDARSAN K VISHNU VARSHAN V T |
Polymechanic & Automation | II |
||
VIGNESH S SRI HARI V K |
Mechatronics | II |
||
SOWMIYA DHARUN K R YOGESH M TOLSTOY M |
Electronics | II |
||
SUDARSAN K SAKTHI SHABARISH K TOLSTOY M |
Design Review Competition | II |
||
SANDEEP RAJ M N KAAVIYA L |
How Things Work | II |
||
MAHESWAR B PRAVEEN J |
Material Identification | I |
||
KUMARAVEL M RAVI I |
Reverse engineering | I |
||
RANJITH M SELVA KUMAR R SENTHI KUMARAN R THAMOTHARA PRASATH V SHREE MADESH M |
ADDITIVE MANUFACTURING | I |
||
VIKNESHWARA RAJA K | ADDITIVE MANUFACTURING | II |
||
PRADEEP T MOHAMMED RIYAZ NAVEEN KUMAR S MAHESWAR B |
ETHICAL HACKING | I |
||
SURYA V SARANKUMAR P NATARAJAN R KHARTHICK ARAVINTH B S |
MOBILE APP DEVLOPMENT | I |
||
VISWAASWARAN J SRIHARI V K SURYA V |
HUMAN POWERED VEHICLES | II |
||
SARAN KUMAR P VIGNESH S VENIRAJA M HARIHARAN S FRANKLIN DANIEL N HARISH A RANJITH M |
LIGHT WEIGHT MOBILITY VEHICLE | I |
||
VIGNESH S SURYA V |
DIGITAL MANUFACTUURING | II |
||
GEORGE PAUL SANDEEP RAJ M N KAAVIYA L |
BENCHMARKING | I |
||
PRAVEEN J ROOBAN VENGAT T |
SOLAR CIRCUIT DESIGN | II |
||
31.01.2018 & 01.02.2018 | Sennaian. S | Sheet Metal Design | SNS college of Engineering | II |
23.02.2018 & 24.02.2018 | Suriya. M | Paper Presentation | Park college of Engineering and Technology | I |
Unais.A | ||||
16.03.2018 | Vijaysrinivasa. G | Paper Presentation | Anna University, Gundy | I |
08.09.2018 | Balamurugan. S | Paper Presentation | Hindustan College Of Engineering And Technology | I |
Boopalakrishnan. L | ||||
12.09.2018 | Athiban Balaji R.C | Fun Mania | Kongu Engineering College | II |
Gokul. D | ||||
27.09.2018& 28.09.2018 | Abyjith Pazhoor | Mr.Mechanist | Park college of Engineering and Technology | II |
Danush Raj .D | AQUA Missile | II |
||
Balaji. M | ||||
ACADEMIC YEAR 2017-2018 | ||||
10.01.2018 | Harihara Sudhan B Palanisamy K |
Material Identification contest - Student Convention SAEINDIA Tier-II Competitions | Hindusthan College of Engg. & Tech, Coimbatore | II |
10.01.2018 | Balamurugan S Bharath Raj B Arun Hariharan B S |
Workholding competition - Student Convention SAEINDIA Tier-II Competitions | I |
|
10.01.2018 | Subramanian M Shyam Kumar M S Palanisamy K |
Oil seal design contest – Student Convention SAEINDIA Tier-II Competitions | I |
|
16.03.2018 | SHYAM RANJITH | NATIONAL LEVEL TECHNICAL SYMPOSIUM – PINNACLE – 2K18 | ANNA UNIVERSITY, GUINDY CAMPUS - CHENNAI | I –PRIZE CASH PRIZE :Rs15000 |
22.08.2017 | SHYAM RANJITH | NATIONAL LEVEL TECHNICAL SYMPOSIUM | SAI RAM ENGINEERING COLLEGE | III |
27.09.2017- 02.10.2017 | AMEET KUMAR SINGH L ANIL ANISH MELVIN D FREDWIN PORINCHUKU KARTHICK L NAVEEN S PRASANTH S RAGHUL R RAJAGANAPATHI V SELVA PRAKASH R THIRUPATHIRAJA L VIMAL V VIVEK KUMAR R PREM KUMAR R SADHAMHUSSAIN ADITHYA RAGU NANTHAN P ARUN HARIHARAN. B.S NITHYANANTHAM D SANTHOSH KUMAR K YOGESH D |
QUAD TORC championship CONDUTED BY ISNEE AT UP | S.P DEGREE COLLEGE, UTTAR PRADESH | II Prize in Business Plan & Overall 7th Place |
4.10.2017 | V.ARVIND SUNDAR S.GOWTHAMRAJ V.GIRIPRASAAD S.HARI HRAN R.HARI PRAKASH |
National Level Mini Bike Design, Fabrication & Racing Contest | SSM Institute of Engineering & Technology | III |
ACADEMIC YEAR 2016-2017 | ||||
28.01.2017 | Muthu Viswa A K Samuvel Y Jeffrina Angel Shyam Kumar |
Student Convention Tier - Ii, Prototype Modelling | Hindustan College Of Engineering And Technology, Coimbatore | II |
28.01.2017 | Karthikeyan N, Ragunath M | Student Convention Tier - Ii, Welding | Hindustan College Of Engineering And Technology, Coimbatore | II |
16.02.2017 | Manoj Kumar K | Inter Collegiate Technical Fest, Presentation | The Tips Global Institute, Coimbatore | II |
16.02.2017 | Manoj Kumar K | Inter Collegiate Technical Fest, Technical Quiz | The Tips Global Institute, Coimbatore | I |
16.02.2017 | Andy Maheshwaran Gowshihan | 2017 Inter Collegiate Technical Fest - Best Manager | The Tips Global Institute | I |
2017 Inter Collegiate Technical Fest - Presentation | The Tips Global Institute | II |
||
23.02.2017 | Manoj Kumar.K, Andy Maheshwaran Gowshihan | Paper Presentation | Ppg Business School, Coimbatore | II |
25.02.2017 | Karthikeyan N Ragunath M |
Student Convention Tier - Iii, Welding | Kongu Engineering College, Perundurai | I |
25.02.2017 | Praveen A Balamurugan S |
Student Convention Tier - Iii, On Board Diagnostics | Kongu Engineering College, Perundurai | II |
28.02.2017 | Infenda Jasmine J Praveen A Bharath Raj B Bala Murugan S Pritheeb N R K |
Student Convention Tier - Ii, Aeromodeling | Hindustan College Of Engineering And Technology, Coimbatore | I |
15.03.2017 | Sabarirajan.S Vignesh.B Vishnuvardhan.A Sudharshan.R Subash.T Ramakrishnan.N Gangadharan Gowtham.N Jayahar.M Jayahar.M Sanjith Kumar.S Vishnu.T Pugazhenthi.S Madhan.S Velu Srinath.M.R. Aravind sundhar.V Vigneshwhar.S Sunil Yoesh. T Hari Prakash Vijaya Rangan.G |
Ultra Golf kart Championship | Maharishi Markandeshwar University, Mullana, Haryana | II |
08.03.2016 | Vignesh b Sabarirajan s |
Paper Presentation | Coimbatore Institute Of Engineering And Technology, Coimbatore | I |
08.03.2016 | Imran m Gobinath s Dinesh kumar r |
Paper Presentation | Coimbatore Institute Of Engineering And Technology, Coimbatore | II |
29.07.2016 - 30.07.2016 | Jeferina Angel X Praveen A Infenda Jasmine |
AERO Modeling | Adhvagana 2.0 National Level Technical Symposium By Sae India_Klu Club At Kalasalingam University , Krishnankovil | I |
29.07.2016 - 30.07.2016 | Jeferina Angel X Praveen A Infenda Jasmine |
Mobile Robotics | Adhvagana 2.0 National Level Technical Symposium By Sae India_Klu Club At Kalasalingam University , Krishnankovil | I |
29.07.2016 - 30.07.2016 | Sanjith Kumar S Mohana Pravin S Muthu Viswa A K |
Prototype Modeling | Adhvagana 2.0 National Level Technical Symposium By Sae India_Klu Club At Kalasalingam University , Krishnankovil | II |
11.08.2016 - 12.08.2016 | Vishnu B Sabarirajan S |
Paper Presentation | SNS College Of Engineering, Coimbatore | I |
11.08.2016 - 12.08.2016 | Vishnu B Sabarirajan S |
Scrapyard Wars | SNS College Of Engineering, Coimbatore | II |
27.08.2016 | Sabarirajan S Srinath P Suresh P Anandhakumar M Rahul raj S Nishar Ahamed N Dhayanidhi M Subash t |
RPM 2K16 | SNS College Of Engineering, Coimbatore | I |
01.09.2016 - 02.09.2016 | Sabarirajan S | Motocross In PRAVEGA 2 | JCT College Of Engineering And Technology, Coimbatore | BEST RIDER |
01.09.2016 - 02.09.2016 | Srinath P Rahul Raj S Sabarirajan S Anandha Kumar M Suresh P Subash T Dhayanidhi M Nishar Ahamed N |
Motocross In PRAVEGA 2 | JCT College Of Engineering And Technology, Coimbatore | II |
15.09.2016 - 16.09.2016 | Arun Hariharan B S Jay.s.Shah Mathew Emmanuvel |
Robokart.Com In Association With - Cell Iit Bombay | SNS College Of Technology | WINNER |
18.09.2016 - 19.09.2016 | Infenda Jasmine J | Aeromodeling | DR.N.G.P Institute Of Technology, Coimbatore | II |
19.10.2016 | Praveen A Infenda Jasmine J |
App Development Contest | DR.N.G.P Institute Of Technology, Coimbatore | III |
Date | Student(s) Name | Event/Project Title | Organizer/Venue | Prize |
ACADEMIC YEAR 2015-2016 | ||||
05.03.2016 | Sabarirajan.S & Co. (6members team) | Minibike competition | Kumaraguru College of Technology, Coimbaore | Best Innovator Award |
17.03.2016 - 19.03.2016 | Sumith Surendran & CO(10members team) | SAE Event | Anna University Regional Center - Tindivanam | II |
18.03.2016 - 21.03.2016 | Jawahar Shrihari & Co. (20 members team) | GO Kart Event | Lovely Professional University, Punjab | Best Built Quality Award with Cash Prize Rs.5000 |
11.03.2016 | Jawahar Shri Hari & Co | Go Kart Event | Lovely Professional University, Punjab | RS.1,05,000 |
Oct 2015 | Rahul Singh.F | Best 3D Printing | Kumaraguru College of Technology, Coimbaore | Rs.3000. - |
April 2015 | Vigneshwar.R | CAD Contest | Kumaraguru College of Technology, Coimbaore | Rs 7000 |
18.09.2015 & 19.09.2015 | Praveen.A & Co | SAE - Aero Modelling | VIT University | II |
22.08.2015 | Praveen.A & Co | SAE - Aero Modelling | DrNGP Institute of Technology | I |
15.10.2015 | Praveen.A & Co | SAE - Aero Modelling | KCT College of Technology | II |
15.08.2015 | Kalimuthu S | Solo singing | MITHRASANGAM organized by Inaindha Kaigal | II |
15.08.2015 | Sudhakar S R | Tamil Speech | MITHRASANGAM organized by Inaindha Kaigal | II |
ACADEMIC YEAR 2014-2015 | ||||
14.08.2014 | Sujithkumar.R.S | Model Making | Dr.N.G.P.Institute of Technology | II |
Sports Activities
S.No | SPORT | Student(s) Name | Organizer/Venue | Price |
---|---|---|---|---|
ACADEMIC YEAR 2016-2017 | ||||
01. | Hockey | Gokula Krishnan.R Hari Krishnan. H Mohammed Jamali Aathil.M Vishnu.T Sasikumar.G Ajith Kumar.D Anirudh Vikraman. M |
CIT College of Technology , Coimbatore. | III |
02. | Cricket | Kalimuthu S | Cricket Tournament- Mithrasangamam 2k16 By Inaindhakaiggal | Best Bowler |
03. | Cricket | Manikandan V Gowthamdas S Ajith Kumar S Gangadharan P Kalimuthu S Gowshihan A M Gokulakrishnan P Karthickeyan P |
Cricket Tournament- Mithrasangamam 2k16 By Inaindhakaiggal | III |
04. | Football | Dhanush M Vignesh Kumar B Jayahar Hari Vignesh Naveen J Jabir Musthafa Kishore Kishore Krishnan |
Anna University Zone Tournament In Football at DR.N.G.P IT | I |
ACADEMIC YEAR 2015-2016 | ||||
01. | Football | Dhanush m hari vignesh s mario van bastin. A lambert godwin b justin james jayahar m cibi k vigneshkumar b vigneshwaran g |
KICS TROPHY – football/kumaraguru college of technology | I |
02. | Hockey | Dhanush M Hari Krishnan H Ajithkumar D Aniruthsaran N J Karthick L Mohammed Jamali Athil M Vishnu T Sasi Kumar G Naveen Prasath R Vignesh B Gokulakrishnan S Ajith Kumar R Anantha Kumar A Jayakumar S Sam Chandra Sekar J Vijay K Naveen S |
KICS TROPHY – hockey/ kumaraguru college of technmology | III |
ACADEMIC YEAR 2014-2015 | ||||
01. | Athletics (Zonal Athletic Meet 2014-15) | Ashokumar.S | KPR Institute OF Engineering and Technology | Runner |
02. | Table Tennis | Niglesh Kumar.S | Park College of Technology | Runner |
NPTEL Certified Students
S.No | Name of the Student | Course Name | Duration | Certification Status |
---|---|---|---|---|
1 | Kishan K | Product Design and Development | 4 Weeks |
Certified |
2 | Kumaravel M | Product Design and Development | 4 Weeks |
Certified |
3 | Logesh Vinoth K | Product Design and Development | 4 Weeks |
Certified |
4 | Maheswar B | Product Design and Development | 4 Weeks |
Certified |
5 | Mirshad Ali | Product Design and Development | 4 Weeks |
Certified |
6 | Mohammed Riyas A | Product Design and Development | 4 Weeks |
Certified with Elite |
7 | Nathin Bharath M | Product Design and Development | 4 Weeks |
Certified with Elite |
8 | Nimal Kumar R | Product Design and Development | 4 Weeks |
Certified with Elite |
9 | Nitishkumar M | Product Design and Development | 4 Weeks |
Certified with Elite |
10 | Padmagirish P G | Product Design and Development | 4 Weeks |
Certified |
11 | Pavithran P | Product Design and Development | 4 Weeks |
Certified |
12 | Prabu Sangar G D | Product Design and Development | 4 Weeks |
Certified |
13 | Prathiv S | Product Design and Development | 4 Weeks |
Certified with Elite |
14 | Praveen J | Product Design and Development | 4 Weeks |
Certified with Elite |
15 | Praveenkumar R K | Product Design and Development | 4 Weeks |
Certified |
16 | Raagan Raj Kumar D | Product Design and Development | 4 Weeks |
Certified with Elite |
17 | Raghul V | Product Design and Development | 4 Weeks |
Certified |
18 | Rajesh C | Product Design and Development | 4 Weeks |
Certified with Elite |
19 | Rajeshwaran S | Product Design and Development | 4 Weeks |
Certified with Elite |
20 | Rakesh K | Product Design and Development | 4 Weeks |
Certified |
21 | Ramkumar M | Product Design and Development | 4 Weeks |
Certified |
22 | Ravi I | Product Design and Development | 4 Weeks |
Certified |
23 | Rooban Vengat T | Product Design and Development | 4 Weeks |
Certified with Elite |
24 | Sakthi Shabarish K | Product Design and Development | 4 Weeks |
Certified with Elite |
25 | Harish K | Product Design and Development | 4 Weeks |
Certified |
26 | Karunaidass S | Product Design and Development | 4 Weeks |
Certified |
27 | Mathan G | Product Design and Development | 4 Weeks |
Certified with Elite |
28 | Pradeep Kumar N | Product Design and Development | 4 Weeks |
Certified with Elite |
29 | Pradeep T | Product Design and Development | 4 Week |
Certified with Elite |
30 | Sathish G | Material Science and Engineering | 8 Week |
Certified |
31 | Viswaaswaran J | Material Science and Engineering | 12 Week |
Certified |
32 | Srihari V K | Material Science and Engineering | 8 Week |
Certified |
33 | Ragul S | Polymer Assisted Abrasive Finishing Processes | 4 Week |
Certified with Elite |
34 | Surya P | Material Science and Engineering | 8 Week |
Certified |
35 | Selva Kumar R | Material Science and Engineering | 8 Week |
Certified |
36 | Viswaaswaran J | Engineering Metrology | 12 Week |
Certified with Elite |
37 | Ramkumar R | Engineering Metrology | 12 Week |
Certified |
38 | Vishnuvardhan V T | Material Science and Engineering | 8 Week |
Certified |
39 | Senthil Kumaran K R | Material Science and Engineering | 8 Week |
Certified |
40 | Shree Madesh M | Material Science and Engineering | 8 Week |
Certified |
41 | Sowmmiya Dharun R | Material Science and Engineering | 8 Week |
Certified |
42 | Tolstoy M | Material Science and Engineering | 8 Week |
Certified |
43 | Vikraman M | Material Science and Engineering | 8 Week |
Certified |
44 | Yogesh M | Material Science and Engineering | 8 Week |
Certified |
45 | Mathew Emmanuel J | Inspection and Quality control in Manufacturing | 4 Week |
Certified |
46 | Mohammedikram J | Inspection and Quality control in Manufacturing | 4 Week |
Certified |
47 | Meikumar K | Inspection and Quality control in Manufacturing | 4 Week |
Certified |
48 | Naveenkumar A | Inspection and Quality control in Manufacturing | 4 Week |
Certified |
49 | J.Viswaaswaran | Manufacturing Automation | 4 Weeks |
Certified |
50 | S.Dheepak | Manufacturing of Composites | 8 Weeks |
Certified |
Industry Interaction
Industrial Visits
Name of the Industry | Day of Visit | No .of Students Benefited | Related Course of study |
---|---|---|---|
Academic Year 2021-2022 | |||
Virtual industrial visit at Santhi Gears | 31.01.2022 | 04 | Manufacturing Technology II |
Virtual industrial visit at Sumedhas Tech Solutions Pvt. Ltd | 18.01.2022 | 10 | Process Planning and Cost Estimation; Product lifecycle Management |
Academic Year 2019-2020 | |||
ANNA ALUMINUM PVT LTD, KOCHI | 16.08.2019 | 49 | Manufacturing Technology – I |
GURUCHARAN INDUSTRIES PVT LTD, MANGLORE | 15.08.2019 | 90 | Manufacturing Technology – II & Process planning and cost estimation |
KAYNES TECHNOLOGY INDIA PVT LTD, MYSORE | 16.08.2019 | 80 | Manufacturing Technology – II & CAD |
Academic Year 2018-2019 | |||
KMCH Solar Power Plant, Karur | 28.09.2018 | 127 | Power Plant Engineering |
UMS technology training centre, Anna silai, Coimbatore | 08.09.2018 | 60 | Computer Aided Design |
Agri Intex 2018, Codissia, Coimbatore | 16.07.2018 | 127 | Manufacturing Technology |
HMT machine tools | 23.02.2019 & 24.02.2019 | 100 | Manufacturing Technology |
The tea factory and Tea museum | 23.02.2019 | 100 | Manufacturing Technology |
R.K Engineering Works | 27.02.2019 | 103 | Manufacturing Technology |
Academic Year 2017-2018 | |||
M/S.KPM Processing Mill Pvt Ltd, Tirupur | 05-08-2017 |
119 |
Design of Transmission Systems |
AAVIN, Coimbatore | 11-08-2017 |
139 |
Manufacturing Technology |
M/S.Santhi casting, Coimbatore | 24-08-2017 |
137 |
Manufacturing Technology |
NILAGIRI BIOSPHERE NATURE PARK | 20.1.2018 |
116 |
ENVIRONMENT SCIENCE |
Lmw LIMITED | 03.02.2018 |
50 |
Manufacturing Technology |
Academic Year 2016-2017 | |||
M/S.Anugraha Valve Castings Limited, Coimbatore | 22-07-2016 |
140 |
Manufacturing Technology |
M/S.Swagath Industrial Corporation, Coimbatore | 04-02-2017 |
139 |
Fluid Mechanics and Machinery |
Nilagiri biosphere nature park, Nilagiri | 24-02-2017 |
119 |
Environment Science and Engineering |
M/S.Traco Cable Company Limited, Cochin | 18-03-2017 |
119 |
Electrical Drives and Controls |
Academic Year 2015-2016 | |||
M/S.Venkateswara Steels and Springs Pvt Ltd, Sulur, Coimbatore | 12-03-2016 |
93 |
Design of Machine Elements |
M/S.Venkateswara Steels and Springs Pvt Ltd, Sulur, Coimbatore | 19-03-2016 |
46 |
Design of Machine Elements |
M/S.Roots Industries India Ltd, Coimbatore | 23-07-2015 |
67 |
Design of Jigs, Fixtures and Press tools |
CPC Limited, Coimbatore | 08-08-2015 |
89 |
Manufacturing Technology |
Inplant Training
S.No | Industry Name and Sector |
Incorporation Status | Date | Duration | Students | Outcome |
---|---|---|---|---|---|---|
Academic Year 2020-2021 | ||||||
1 | Machenn Inovation, Coimbatore | Private | 25.03.2021 – 31.03.2021 | 07 | Desmon Tony A | - |
2 | 25.03.2021 – 31.03.2021 | Donald oefry A | ||||
3 | 25.03.2021 – 31.03.2021 | Rishanth M | ||||
4 | 25.03.2021 – 31.03.2021 | Rishanth M | ||||
5 | Prabal Trucking, Coimbatore | 07.04.2021 - 13.04.2021 | Vimalesh gopal RK | |||
6 | 07.04.2021 - 13.04.2021 | Deepak Venkatesh T | ||||
7 | 07.04.2021 - 13.04.2021 | Gowthaman S | ||||
Academic Year 2019-2020 | ||||||
1 | ROYAL SUNDARAM, CHENNAI | Private | 25.11.2019 - 06.12.2019 | 10 | DANIEL ARULANANDH.S | - |
2 | ELGI EQIUPMENT LIMITED, COIMBATORE | Private | 20.11.2019 - 29.11.2019 | 10 | GRIFFIN SINGH A | - |
Academic Year 2018-2019 | ||||||
1. | Prabul Trucking (Bharath Benz) Arasur, Coimbatore | Private | 28.05.2019 to 09.06.2019 | 14 | PRASANTH S | - |
2. | Prabul Trucking (Bharath Benz) Arasur, Coimbatore | Private | 28.05.2019 to 09.06.2019 | 14 | SURYA R | - |
3. | Neyveli Lignite Corporation, Neyveli | Government | 03.06.2019 to 15.06.2019 | 13 | KEERTHI RAMESH | - |
4. | Neyveli Lignite Corporation, Neyveli | Government | 03.06.2019 to 15.06.2019 | 13 | HARI HARAN S | - |
5. | Neyveli Lignite Corporation, Neyveli | Government | 03.06.2019 to 15.06.2019 | 13 | DANIAL ARULANANDH S | - |
6. | Neyveli Lignite Corporation, Neyveli | Government | 03.06.2019 to 15.06.2019 | 13 | HARI KRISHNA G | - |
7. | Neyveli Lignite Corporation, Neyveli | Government | 03.06.2019 to 15.06.2019 | 13 | GOWTHAM V | - |
8. | Sarathy Auto Cars, Kottarakara, Kerala. | Private | 10.06.2019 to 14.06.2019 | 5 | JOJU JOHNSON | - |
9. | BHEL , Thirumayam | Government | 27.05.2019 to 30.05.2019 | 4 | ABARASON P | - |
10. | Balasanka TVS Motors, Sivakasi. | Private | 04.06.2019 to 09.06.2019 | 5 | GOKULA KRISHNAN B | - |
11. | D.R Engineers Perinackanpalayam, Coimbatore | Private | 07.06.2019 to 08.06.2019 | 2 | GOKUL R | - |
12. | RRK Alloys, Kuppepalayam, Coimbatore. | Private | 25.05.2019 to 01.06.2019 | 6 | LISANTHKUMAR P | - |
13. | AEIL , Tennur, Trichy | Private | 10.06.2019 to 16.06.2019 | 6 | GOWTHAM M | - |
14. | AEIL , Tennur, Trichy | Private | 10.06.2019 to 16.06.2019 | 6 | AJITH KUMAR A | - |
15. | BHEL , Thirumayam | Government | 27.05.2019 to 30.05.2019 | 4 | VISHNU PRASANTH M | - |
16. | BHEL , Thirumayam | Government | 27.05.2019 to 30.05.2019 | 4 | SATHISHPANDIAN S | - |
17. | BHEL , Thirumayam | Government | 27.05.2019 to 30.05.2019 | 4 | SHIVRAM S | - |
18. | BHEL , Thirumayam | Government | 27.05.2019 to 30.05.2019 | 4 | SANJAY ANANDH M | - |
19. | BHEL , Thirumayam | Government | 27.05.2019 to 30.05.2019 | 4 | SIVALINGSON S | - |
20. | BHEL , Thirumayam | Government | 27.05.2019 to 30.05.2019 | 4 | RAJKUMAR R | - |
21. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | SUJITH KUMAR S | - |
22. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | LOGANATHAN M | - |
23. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | PADMANABAN S | - |
24. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | SUBASH T | - |
25. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | PRASANTH M | - |
26. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | SHEIKH ISMAIL N | - |
27. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | PRAVEEN KUMAR R | - |
28. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | SAKTHIVEL D | - |
29. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | SETHURAMAN R | - |
30. | Neyveli Lignite Corporation, Neyveli | Government | 10.06.2019 to 15.06.2019 | 6 | VIGNESH K | - |
31. | Mithun Shreebags, Salem | Private | 10.06.2019 to 20.06.2019 | 10 | SHYAM RANJITH S | - |
32. | SRN Engineering works, Coimbatore | Private | 10.06.2019 to 25.06.2019 | 15 | SUDARSAN K | - |
33. | TATA Motors Private Limited. | Private | 28.11.18 | 3 Days | Danial Arunalanth.S | - |
34. | Artennis Volvo | Private | 05.12.18 | 3 Days | Jesson Mathew Varugheese | - |
35. | STP Engineering | Private | 25.11.18 | 5 Days | Gokul.A | - |
36. | STP Engineering | Private | 25.11.18 | 5 Days | Dinesh Kumar.K | - |
37. | Sri Maruthi Industries | Private | 19.11.18 | 2 Days | Ajith Kumar.A | - |
38. | Sri Maruthi Industries | Private | 19.11.18 | 2 Days | Ajith Kumar.M | - |
39. | Sri Maruthi Industries | Private | 19.11.18 | 2 Days | Gowtham.M | - |
40. | Sri Maruthi Industries | Private | 19.11.18 | 2 Days | Ajay Kumar.S | - |
41. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | Balajee.R | - |
42. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | Gogul Krishna. J | - |
43. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | Dhanapal.N | - |
44. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | Dhiraj Kumar.L | - |
45. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | Dinesh K | - |
46. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | Gowtham Pranap.L | - |
47. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | Gokul.R | - |
48. | Delta Engineering | Private | 10.12.18 | 5 Days | Ashish Daniel Payanickal | - |
49. | Delta Engineering | Private | 03.12.18 | 5 Days | Arun Sudhakaran | - |
50. | Delta Engineering | Private | 03.12.18 | 5 Days | Anjalbal P K | - |
51. | S.V.Engineering Works | Private | 07.12.18 | 2 Days | Gokula Krishnan.B | - |
52. | A Nataraza hero | Private | 03.12.18 | 6 Days | Akash M | - |
53. | S.V.Engineering | Private | 06.12.18 | 2 Days | S.Harrish Kumar | - |
54. | S.V.Engineering | Private | 06.12.18 | 2 Days | V.Gowtham | - |
55. | S.V.Engineering | Private | 06.12.18 | 2 Days | J.Hari Krishna | - |
56. | S.V.Engineering | Private | 06.12.18 | 2 Days | Kannan | - |
57. | Sri Krishna Auto Care | Private | 03.12.18 | 3Days | B.S.Kharthick Aravinth | - |
58. | Sri Krishna Auto Care | Private | 03.12.18 | 3Days | V.Mageshwaran | - |
59. | Bharath auto cables | Private | 27.11.18 | 11 Days | Manoj kumar P C | - |
60. | Sri Vani Engineering Works | Private | 04.12.18 | 5Days | S.Murugaraj | - |
61. | Sri Maruthi Industries | Private | 06.12.18 | 2 Days | R.Guruvayoorappan | - |
62. | Essarr Engineering | Private | 26.11.18 | 5Days | S.Navaneethakrishnan | - |
63. | Mech-O-Tech | Private | 26.11.18 | 3Days | Niveditha Noble | - |
64. | Thomson Engineering Works | Private | 26.11.18 | 10 Days | Joju Johnson | - |
65. | Manjoor tea factory | Private | 26.11.18 | 5 Days | Vishnukumar R | - |
66. | Delta Engineering System | Private | 03.12.18 | 5 Days | Sreedev Saawan B | - |
67. | Paul Engineering | Private | 14.12.18 | 5 Days | George Paul | - |
68. | Paul Engineering | Private | 14.12.18 | 5 Days | Deepak Sankar K | - |
69. | Paul Engineering | Private | 14.12.18 | 5 Days | Jamshad K | - |
70. | Tv Sundaram Iyengar & Sons Pvt Ltd | Private | 03.12.18 | 6 Days | Parthiv S | - |
71. | Fine Rubber Products | Private | 03.12.18 | 8 Days | Mathan G | - |
72. | Heavy Alloy Penetrator Project (Happ) | Private | 17.12.18 | 6 Days | Mithersh Kanna K | - |
73. | Uniq Technology | Private | 20.11.18 | 5 Days | Pattabiraman M | - |
74. | Sri Ramkarthic Polymers | Private | 19.11.18 | 4 Days | Karunaidass S | - |
75. | Sri Ramkarthic Polymers | Private | 19.11.18 | 4 Days | Praveen J | - |
76. | Sri Ramkarthic Polymers | Private | 19.11.18 | 4 Days | Naveen Kumar A | - |
77. | Sri Ramkarthic Polymers | Private | 19.11.18 | 4 Days | Nathin Barath | - |
78. | Goodwin Motors | Private | 14.12.18 | 18 Days | Sarankumar.P | - |
79. | Goodwin Motors | Private | 14.12.18 | 18 Days | Senthil.T.A | - |
80. | Goodwin Motors | Private | 14.12.18 | 18 Days | Vignesh.S | - |
81. | Goodwin Motors | Private | 15.12.18 | 5 Days | Ranjith.M | - |
82. | Goodwin Motors | Private | 15.12.18 | 5 Days | Surya P | - |
83. | Goodwin Motors | Private | 15.12.18 | 5 Days | Thamothara Prasath.V | - |
84. | Goodwin Motors | Private | 15.12.18 | 5 Days | Shree Madesh.M | - |
85. | Goodwin Motors | Private | 15.12.18 | 5 Days | Yogesh.M | - |
86. | Goodwin Motors | Private | 15.12.18 | 5 Days | Veniraja.M | - |
87. | Goodwin Motors | Private | 15.12.18 | 5 Days | Srihari.V.K | - |
88. | Goodwin Motors | Private | 15.12.18 | 5 Days | Senthil Kumaran.K.R | - |
89. | Goodwin Motors | Private | 15.12.18 | 5 Days | Sudarsan.K | - |
90. | Goodwin Motors | Private | 15.12.18 | 5 Days | Selvakumar.R | - |
91. | Goodwin Motors | Private | 15.12.18 | 5 Days | Tolstoy.M | - |
92. | Goodwin Motors | Private | 15.12.18 | 5 Days | Vikneshwara Raja.K | - |
93. | Shree Bags | Private | 3.12.18 | 5 Days | Shyam Ranjith.S | - |
94. | Paul Engineering | Private | 14.12.18 | 5 Days | Sandeepraj.M.N | - |
Academic Year 2017-2018 | ||||||
1. | AMBAL AUTOGUDALUR | PRIVATE | 11/12/2017 15/12/2017 | 5 |
AAKASH P | Servicing of Light Motor Vehicles |
1. | PAUL ENGINEERING | PRIVATE | 1/12/2017 8/12/2017 | 8 |
AASHIN P JOHNSON | Gained knowledge in Manufacturing conveyors, vibrator |
2. | MALAPURAM METALS & ENGINEERING | PRIVATE | 4/12/2017 9/12/2017 | 6 |
DEEPAK SANKAR K | Exposure to manufacturing and exporting of Coir fiber extraction machines |
3. | HINDUSTAN ENTERPRISES | PRIVATE | 13/12/201715/12/2017 | 3 |
DINESH R | Servicing of Light Motor Vehicles |
4. | PAUL ENGINEERING | PRIVATE | 1/12/20178/12/2017 | 8 |
GEORGE PAUL | Interpret the fabrication of Engine bearings |
5. | AMBAL AUTO | PRIVATE | 11/12/201715/12/2017 | 5 |
GUNA SEGARAN L | Servicing of Light Motor Vehicles |
6. | HINDUSTAN ENTERPRISES | PRIVATE | 13/12/201715/12/2017 | 3 |
HARIHARAN S | Servicing of Light Motor Vehicles |
7. | FRONTIER INDUSTRY | PRIVATE | 4/12/0179/12/2017 | 6 |
JAMSHAD K | Understanding the thermal power plant operation |
8. | FRONTIER INDUSTRY | PRIVATE | 4/12/0179/12/2017 | 6 |
AJAY AYYODE | Understanding the thermal power plant operation |
9. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
KISHOREKANNAN R | Knowledge about the pump design |
10. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
KUMARAVEL M | Knowledge about the pump design |
11. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
MAHESWAR.B | Knowledge about the pump design |
12. | VIRRUDHEESWARA ENGG SERVICE | PRIVATE | 13/12/201716/12/2017 | 4 |
MITHRESH KANNA.K | Knowledge about the Tea making machinery |
13. | INTEGRAL COACH FACTORY | PRIVATE | 5/12/201712/12/2017 | 8 |
MITHRESH KANNA.K | Interpret the fabrication of Engine bearings |
14. | VETRI ENGINEERING | PRIVATE | 11/12/201715/12/2017 | 5 |
MOHAMMED RIYAS A | Interpret the fabrication of Engine bearings |
15. | PAUL ENGINEERING | PRIVATE | 1/12/20175/12/2017 | 5 |
PATTABIRAMAN M | Gained knowledge in Manufacturing conveyors, vibrator |
16. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
PRABU SANGAR.G.D | Servicing of Light Motor VehiclesKnowledge about the pump design |
17. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
RAJESHWARAN S | Servicing of Light Motor VehiclesKnowledge about the pump design |
18. | GANAPATHY ENGIEERING WORKS | PRIVATE | 27/11/20179/12/2017 | 13 |
RAMKUMAR R | Interpret the fabrication of Engine bearings |
19. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
RAVI.I | Servicing of Light Motor VehiclesKnowledge about the pump design |
20. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
ROOBAN VENGAT T | Servicing of Light Motor VehiclesKnowledge about the pump design |
21. | AGRO PUMPS | PRIVATE | 12/12/201716/12/2017 | 5 |
SAKTHI SHABARISH K | Servicing of Light Motor VehiclesKnowledge about the pump design |
22. | FRONTIER TEA FACTORY | PRIVATE | 4/12/20179/12/2017 | 6 |
SANDEEP RAJ M.N | Knowledge about the Tea making machinery |
23. | INDUS MOTOR CO. (P) | PRIVATE | 12/12/201716/12/2017 | 5 |
SAVANTH KRISHNA K | Servicing of Light Motor Vehicles |
24. | HINDUSTAN ENTERPRISES | PRIVATE | 13/12/201715/12/2017 | 3 |
SARANKUMAR.P | Training in Heavy vehicle servicing |
25. | AMBAL AUTO | PRIVATE | 13/12/201715/12/2017 | 3 |
SELVAKUMAR.R | Servicing of Light Motor Vehicles |
26. | AMBAL AUTO | PRIVATE | 13/12/201715/12/2017 | 3 |
SENTHILKUMARAN.K.R. | Servicing of Light Motor Vehicles |
27. | SHRI BAGS | PRIVATE | 1/12/20176/12/2017 | 6 |
SHYAMRANJITH | Training in Engineering services |
28. | AMBAL AUTO | PRIVATE | 13/12/201715/12/2017 | 3 |
SUDARSAN.K | Servicing of Light Motor Vehicles |
29. | AMBAL AUTO | PRIVATE | 13/12/201715/12/2017 | 3 |
TAMILSELVAN.C | Servicing of Light Motor Vehicles |
30. | AMBAL AUTO | PRIVATE | 13/12/201715/12/2017 | 3 |
TOLSTOY.M | Servicing of Light Motor Vehicles |
31. | AMBAL AUTO | PRIVATE | 13/12/201715/12/2017 | 3 |
SURYA.V | Servicing of Light Motor Vehicles |
32. | CALIBER EMBEDDED | PRIVATE | 11/12/201715/12/2017 | 5 |
VISHNUVARDHAN.V.T. | Knowledge about the radio waves and frequency |
33. | VENUS FINISHERS | PRIVATE | 11/12/201713/12/2017 | 3 |
VISWAASWARAN.J | Interpret the fabrication of Engine bearings |
34. | AMBAL AUTO | PRIVATE | 13/12/201715/12/2017 | 3 |
RANJITH.M | Servicing of Light Motor Vehicles |
35. | ASHOK LEYLAND PVT LTD | PRIVATE | 12/12/201716/12/2017 | 5 |
ADITHYA RAGU NANTHAN P | Servicing of Light Motor Vehicles |
36. | TNSTC | GOVERMENT | 14/12/201716/12/2017 | 4 |
AJAY P.S | Training in Heavy vehicle servicing |
37. | OPEL | PRIVATE | 28/11/20176/12/2017 | 9 |
ARUN KUMAR K | Interpret the fabrication of Engine bearings |
38. | GEE KEYY ENGINEERING | PRIVATE | 27/11/20171/12/2017 | 5 |
ARUN S | Able to operate CNC machines |
39. | GEE KEYY ENGINEERING | PRIVATE | 27/11/20171/12/2017 | 5 |
ARUNPANDIAN. R | Able to operate CNC machines |
40. | AXIS ENGINEERING | PRIVATE | 15/11/201715/12/2017 | 30 |
GOKULA KRISHNAN B | Able to operate CNC machines |
41. | GEE KEYY ENGINEERING | PRIVATE | 27/11/20171/12/2017 | 5 |
GOWTHAM B | Able to operate CNC machines |
42. | SRI GANESH ENGINEERING WORKS | PRIVATE | 27/11/201715/12/2017 | 19 |
JEFFRINA ANGEL X | Interpret the fabrication of Engine bearings |
43. | HEAVY ALLOY PENETRATOR | PRIVATE | 18/12/201723/12/2017 | 6 |
JEYABALAN J | Training in Heavy vehicle servicing |
44. | SANTHI GEARS | PRIVATE | 4/12/20179/12/2017 | 6 |
KARTHICK S | Gathered knowledge in design of shafts and camshafts |
45. | SANTHI GEARS | PRIVATE | 4/12/20179/12/2017 | 6 |
KARTHIKEYAN B | Gathered knowledge in design of shafts and camshafts |
46. | LAKSHMI ENTERPRISES` | PRIVATE | 4/12/20178/12/2017 | 4 |
KRISHNA T | Interpret the fabrication of Engine bearings |
47. | GANGES INTERNATIONAL PVT LTD | PRIVATE | 1/12/201713/12/2017 | 13 |
MAHESWAR S | Gathered knowledge in design of shafts and camshafts |
48. | SAKTHI TECH MANUFACTURING | PRIVATE | 4/12/201711/12/2017 | 7 |
MATHEW EMMANUEL J | Able to operate CNC machines |
49. | SATHI GEAR PRODUCT | PRIVATE | 5/12/20179/12/2017 | 5 |
MEIKUMAR K | Gathered knowledge in design of shafts and camshafts |
50. | SAKTHI TECH MANUFACTURING | PRIVATE | 4/12/201711/12/2017 | 7 |
MOHAMMEDIKRAM J | Able to operate CNC machines |
51. | HEAVY ALLOY PENETRATOR | PRIVATE | 18/12/201723/12/2017 | 6 |
NAVEEN BALAJI R | Training in Heavy vehicle servicing |
52. | ASHOK LEYLAND | PRIVATE | 21/11/201725/11/2017 | 5 |
NAVEEN BALAJI R | Training in Heavy vehicle servicing |
53. | IMPEL MACHINE SHOP | PRIVATE | 11/12/201716/12/2017 | 6 |
NAVEEN J | Able to operate CNC machines |
54. | SRI GANESH ENGINEERING WORKS | PRIVATE | 27/11/201715/12/2017 | 19 |
NIRMAL KUMAR R | Gathered knowledge in design of shafts and camshafts |
55. | ASHOK LEYLAND | PRIVATE | 12/12/201716/12/217 | 5 |
PARINESAN T | Training in Heavy vehicle servicing |
56. | ORIENTAL PLANTS & EQUIPMENT | PRIVATE | 28/11/20176/12/2017 | 9 |
PARTHIBAN.A | Able to operate CNC machines |
57. | TOYOTA | PRIVATE | 11/12/201716/12/2017 | 6 |
PRABHAGAR GANDHI K | Servicing of Light Motor Vehicles |
58. | SAKTHI TECH MANUFACTURING | PRIVATE | 4/12/201711/12/2017 | 8 |
PRAVEEN RAJ A | Able to operate CNC machines |
59. | ASHOK LEYLAND | PRIVATE | 5/12/20179/12/2017 | 5 |
PRITHEEB N R K | Training in Heavy vehicle servicing |
60. | SATHI GEAR PRODUCT | PRIVATE | 5/12/20179/12/2017 | 5 |
RAGUL S | Gathered knowledge in design of shafts and camshafts |
61. | KHIMJI RAMADAS | PRIVATE | 27/11/201714/12/2017 | 19 |
RAKESH RAVIKUMAR | Gathered knowledge in design of shafts and camshafts |
62. | SIGNAL & TELECOMMUNICATION | PRIVATE | 4/12/201722/12/2017 | 18 |
KALI RAJESH N | Knowledge about the radio waves and frequency |
63. | G PLAST PVT LTD | PRIVATE | 11/12/201716/12/2017 | 6 |
NIJANTHAN T | Gathered knowledge in design of shafts and camshafts |
64. | GOOD WILL AUTO SERVICE | PRIVATE | 15/11/201715/12/2017 | 30 |
SADISH V | Gathered knowledge in design of shafts and camshafts |
65. | SRF LTD | PRIVATE | 4/12/20178/12/2017 | 5 |
SHYAM KUMAR M S | Able to operate CNC machines |
66. | TNSTC | PRIVATE | 14/12/201716/12/2017 | 3 |
SIVA BERSHAN V P | Training in Heavy vehicle servicing |
67. | ANUGRAHA VALVE CASTING | PRIVATE | 12/12/201716/12/2017 | 5 |
SIVA KUMAR.R | Interpret the fabrication of Engine bearings |
68. | YAMAHA AUTO SERVICE | PRIVATE | 29/11/20172/12/2017 | 4 |
SREENADHAN. K.S | Servicing of Light Motor Vehicles |
69. | ANUGRAHA VALVE CASTING | PRIVATE | 12/12/201716/12/2017 | 5 |
SRINATH.U | Interpret the fabrication of Engine bearings |
70. | SRF LTD | PRIVATE | 4/12/20178/12/2017 | 5 |
SUBRAMANIAN M | Training in Heavy vehicle servicing |
71. | GEEKEY ENGG & CO | PRIVATE | 27/11/20171/12/2017 | 5 |
SUGANESH S | Able to operate CNC machines |
72. | ASHOK LEYLAND | PRIVATE | 12/12/201716/12/2017 | 5 |
THANISH ABRAHAM C | Training in Heavy vehicle servicing |
73. | TNSTC | PRIVATE | 13/12/201716/12/2017 | 4 |
VIJAYARANGAN G | Training in Heavy vehicle servicing |
Academic Year 2016-2017 | ||||||
1. | M/S.Paul Engineering, Coimbatore | Private | 05-06-2017 -09-06-201719-06-2017 -21-06-2017 | 08 |
George Paul(2016-2020) | Gained knowledge in Manufacturing conveyors, vibrator screen, feeder etc |
2. | Deepak Sankar K(2016-2020) | |||||
3. | TNSTC Ltd, Salem | Tamil Nadu Government | 21-06-2017 -30-07-2017 | 10 |
Ajithkumar D(2014-2018) | Training in Heavy vehicle servicing |
4. | Jawahar R(2014-2018) | |||||
5. | Likith Reddy J(2014-2018) | |||||
6. | M/S.Godwell Engineering, Coimbatore | Private | 19-06-2017-01-07-2017 | 11 |
Sharavana Sujai M(2014-2018) | Exposure to manufacturing and exporting of Coir fiber extraction machines |
7. | M/S.Ambal Autos (Maruti Suzuki), Erode | Private | 20-06-2017-30-06-2017 | 10 |
Aniruthsaran N J(2014-2018) | Servicing of Light Motor Vehicles |
8. | M/S.Bimetal Bearings Pvt-Ltd, Coimbatore | Private | 01-06-2017-09-06-2017 | 09 |
Sowmmiya Dharun K R(2016-2020) | Interpret the fabrication of Engine bearings |
9. | M/S.Kudankulam Nuclear Power Plant, Tirunelveli | Private | 12-06-2017-20-06-2017 | 09 |
Mathan S(2014-2018) | Understanding the thermal power plant operation |
10. | Mohammed Jamali Athil M(2014-2018) | |||||
11. | Nuclear Power Project, Kudankulam | Private | 12-06-2017-20-06-2017 | 09 |
Vinoth Kumar R(2014-2018) | Understanding the thermal power plant operation |
12. | Velu Srinath M R(2014-2018) | |||||
13. | Pugazhenthi S(2014-2018) | |||||
14. | Samiyappan S(2014-2018) | |||||
15. | Hari Hara Sudhan P (2014-2018) | |||||
16. | M/S. Salisbury Industrial Co -operative Tea Factory Ltd,Gudalur | Private | 19-06-2017-24-06-2017 | 06 |
Gunasegaran L(2016-2020) | Knowledge about the Tea making machinery |
17. | M/S. K.P.Namboodiri’s AyurvedicsVadakkekad | Private | 19-06-2017-23-06-2017 | 05 |
Rayees K H(2014-2018) | Gather knowledge on Ayurvedic medicine extraction process |
18. | M/S. Karivardhan Vocational Institute, Coimbatore | Private | 01-06-2017-10-06-2017 | 10 |
Vishnuvardhan V T(2016-20120) | Practical Training on manufacturing process |
19. | M/S.V.S.T Service Station,Trichirappali | Private | 21-06-2017-28-06-2017 | 08 |
Gowtham S(2014-2018) | Servicing of Automation |
20. | M/S.Ashok Leyland,Hosur | Private | 10-07-2016-15-07-2016 | 06 |
Danush Raj D(2015-2019) | Gather knowledge in assembling of automotive vehicles |
21. | M/S.The Acetech Machinery components India Pvt. Ltd,Coimbatore | Private | 09-02-2017-31-03-2017 | 51 |
Suresh P(2013-2017) | Able to operate CNC machines |
22. | M/S.Prime Movers Solutions, Coimbatore | Private | 23-06-2017 -30-06-2017 | 08 |
Ajay R(2014-2018) | Able to operate CNC machines |
23. | Karthick V(2014-2018) | |||||
24. | Karthick Raj M(2014-2018) | |||||
25. | Kavi B(2014-2018) | |||||
26. | Maruthi Raja P(2014-2018) | |||||
27. | M/S.Code Bind Technology, Coimbatore | Private | 06-06-2017 -10-06-2017 | 05 |
Sri Hari(2016-2020) | Training on numerical controls in various process |
28. | Vikram A(2016-2020) | |||||
29. | Sarankumar P(2016-2020) | |||||
30. | Sathya R(2016-2020) | |||||
31. | Vignesh S(2016-2020) | |||||
32. | Viswajith Ravindran (2016-2020) | |||||
33. | M/S.Integra automation pvt- ltd, Coimbatore | Private | 19-06-2017 -24-06-2017 | 06 |
Nandha Kumar K(2014-2018) | Acquire knowledge on Casting and machinery |
34. | M/S.Indel Honda (Service), Palakkad | Private | 09-06-2017 -14-06-2017 | 06 |
Anantharaman K S(2015-2019) | Servicing of Light Motor Vehicles |
35. | Kiran N(2015-2019) | |||||
36. | M/S.Best Auto Service, Coimbatore | Private | 19-06-2017-26-06-2017 | 08 |
Basalingam S(2014-2018) | Servicing of Light Motor Vehicles |
37. | Dhatchanamoorthy S(2014-2018) | |||||
38. | M/S.Sri Kumaran Millls, Coimbatore | Private | 28-06-2017-02-07-2017 | 06 |
Naren Raj A(2014-2018) | Understood the process of Textile Milling |
39. | M/S.Riders Royal Enfield, Tirupur | Private | 12-06-2017-16-06-2017 | 05 |
Adithya Ragu Nanthan P(2015-2019) | Servicing of Two Wheelers |
40. | M/S.Radio Astronomy Center, Ooty | Private | 29-05-2017-02-06-2017 | 05 |
Danush Raj D(2015-2019) | Knowledge about the radio waves and frequency |
41. | M/S.Spin Air System, Coimbatore | Private | 13-06-2017-17-06-2017 | 05 |
Karthick S(2015-2019) | Training on Textile Humidification process |
42. | M/S.Royal Enfield(Service), Tiruppur | Private | 12-06-2017-16-06-2017 | 05 |
Mohan Raju S(2015-2019) | Servicing of Two Wheelers |
43. | M/S.Ponnachi industries, Coimbatore | Private | 19-06-2017-23-06-2017 | 05 |
Infenda Jasmine J(2014-2018) | Training on Vertical CNC Machining |
44. | Aravindasamy T(2014-2018) | |||||
45. | Arun Maris(2014-2018) | |||||
46. | Jaganathan S(2014-2018) | |||||
47. | Kalaiselvan S(2014-2018) | |||||
48. | M/S.Astron Pro Industries, Coimbatore | Private | 19-06-2017-23-06-2017 | 05 |
Bharathkumar A(2014-2018) | Exposure to Rubber stamps and photopolymer |
49. | M/S.Arul Motors (Tata Motors), Tirupur | Private | 19-06-2017-23-06-2017 | 05 |
Karthikeyan N(2014-2018) | Servicing of Light Motor Vehicles |
50. | M/S.Deccan Industries, Coimbatore | Private | 13-06-2017-16-06-2017 | 04 |
Aravind M(2015-2019) | Knowledge about the pump design |
51. | M/S.Deccan Industries, Coimbatore | Private | 12-06-2017-15-06-2017 | 04 |
Solomon Raj X(2015-2019) | Knowledge about the pump design |
52. | M/S.Shri Krishna Timber Mart and Saw Mill, Salem | Private | 19-06-2017-21-06-2017 | 03 |
Balaji V(2016-2020) | Understood the process of Saw Milling |
53. | M/S.Om Sakthi Dyeing, Tirupur | Private | 12-06-2017-14-06-2017 | 03 |
Aashin P Johnson(2016-2020) | Understood the process of Textile dying |
54. | Balamurugan P(2016-2020) | |||||
55. | Ghowtham M(2016-2020) | |||||
56. | Devaprasath G(2016-2020) | |||||
57. | Anas H(2016-2020) | |||||
58. | M/S.Kumushiv Industries, Trichy | Private | 05-06-2017-10-06-2017 | 06 |
Shanjeevi N(2016-2020) | Able to operate CNC machines |
59. | M/S.TVS Motor Company, Chennai | Private | 24-06-2017-26-06-2017 | 03 |
Shyam Ranjith S(2016-2020) | Interpret Manufacturing of automobile components |
60. | M/S.Sri Hari Venkateshwarapaper Mills Pvt-Ltd, Sivakasi | Private | 21-06-2017-23-06-2017 | 03 |
Yogesh M(2016-2020) | Able to understand the process of paper manufacturing |
61. | M/S.Schumak Equipment India Pvt Ltd, Coimbatore | Private | 24-06-2017-27-06-2017 | 04 |
Jeffrina Angel X(2015-2019) | Acquired knowledge on GarageEquipments |
62. | Kalirajesh N(2015-2019) | |||||
63. | TNSTC Ltd, Erode | Tamil Nadu Government | 16-06-2017-17-06-2017 | 02 |
Suresh Kumar S(2015-2019) | Training in Heavy vehicle servicing |
64. | M/S.Ambal Auto, Coimbatore | Private | 15-062017-17-06-2017 | 03 |
Suriya M(2015-2019) | Servicing of Light Motor Vehicles |
65. | Vijay Srinivasan G(2015-2019) | |||||
66. | M/S.Ponnis Sugars Ltd-Erode | Private | 15-06-2017-17-06-2017 | 03 |
Vishnu B(2015-2019) | Able to understand the sugarcane production |
67. | M/S.TVS- TS, Chennai | Private | 19-06-2017-23-06-2017 | 05 |
Anandhakumar M(2014-2018) | Servicing of Two WheelersUnderstanding of Manufacturing of hydraulics systems |
68. | Gowthamraj S(2014-2018) | |||||
69. | M/S.GECO Special Machine, Coimbatore | Private | 23-06-2017- 24-06-2017 | 02 |
Monish K(2014-2018) | Training in Heavy vehicle servicingAble to understand the sugarcane production |
70. | Mario Van Bastin A(2014-2018) | |||||
71. | KSRTC Regional workshop, Calicut | Private | 19-06-2017-22-06-2017 | 04 |
Naveen S(2014-2018) | Servicing of Two Wheelers |
72. | Prabhul P P(2014-2018) | |||||
73. | M/S. Shashthi Cars Pvt-Ltd, Tirupur | Private | 19-06-2017-21-06-2017 | 03 |
Hariharasudhan B(2014-2018) | Gather knowledge in assembling of automotive vehiclesUnderstood the working process of Dyeing MachineAble to understand the sugarcane productionServicing of Light Motor VehiclesAble to operate CNC machines |
74. | Muthu Viswa A K(2014-2018) | |||||
75. | Murtuza A(2014-2018) | |||||
76. | Palanisamy K(2014-2018) | |||||
77. | Naveen Kumar B(2014-2018) | |||||
78. | M/S.Sri Ragavendra Mercerizing Coimbatore | Private | 19-06-2017-23-06-2017 | 05 |
Karthikeyan R(2014-2018) | Gathered idea on manufacturing of rubber tiresTraining in Heavy vehicle servicingUnderstood the fabrication of aluminum and steelKnowledge about the pump design |
79. | Praveen Kumar S(2014-2018) | |||||
80. | Mohana Pravin S(2014-2018) | |||||
81. | Ommar Muqthar A(2014-2018) | |||||
82. | M/S.Sakthi Sugar Pvt Ltd, Sivaganga | Private | 19-06-2017-23-06-2017 | 05 |
Karthikeyan P(2014-2018) | Training in Heavy vehicle servicingTraining in Engineering servicesGathered knowledge in design of shafts and camshafts |
83. | Karthikeyan S(2014-2018) | |||||
84. | Karikalan R N(2014-2018) | |||||
85. | Lavan Prasath E(2014-2018) | |||||
86. | M/S.Ambal Autos, Erode | Private | 20-06-2017-30-06-2017 | 11 |
Kathiresan N(2014-2018) | Gather knowledge in assembling of automotive vehiclesUnderstood the working process of Dyeing MachineAble to understand the sugarcane productionServicing of Light Motor Vehicles |
87. | Pradeep Raj T(2014-2018) | |||||
88. | M/S.Mani Automation, Coimbatore | Private | 21-06-2017-26-06-2017 | 06 |
Jawahar R(2014-2018) | |
89. | Nirmal G(2014-2018) | |||||
90. | M/S.TVS Rubber Factory, Madurai | Private | 26-06-2017-30-06-2017 | 05 |
Vishnu T(2014-2018) | Able to operate CNC machinesGathered idea on manufacturing of rubber tires |
91. | Vikram B(2014-2018) | |||||
92. | TNSTC Ltd, Salem | Tamil Nadu Government | 21-06-2017-30-06-2017 | 10 |
Ajith Kumar D(2014-2018) | Training in Heavy vehicle servicingUnderstood the fabrication of aluminum and steelKnowledge about the pump designTraining in Heavy vehicle servicingTraining in Engineering services |
93. | Sasi Kumar G(2014-2018) | |||||
94. | Rajesh R(2014-2018) | |||||
95. | Sathish V(2014-2018) | |||||
96. | Ramesh D(2014-2018) | |||||
97. | M/S.Maruthi Fabricators, Tanjore | Private | 28-06-2017-01-07-2017 | 05 |
Surendhar M(2014-2018) | Gathered knowledge in design of shafts and camshaftsGather knowledge in assembling of automotive vehicles |
98. | Thirumavalavan J(2014-2018) | |||||
99. | M/S.Aquasub Industries, Coimbatore | Private | 16-06-2017-20-06-2017 | 05 |
Mithresh Kanna K(2016-2020) | |
100. | Ravi I(2016-2020) | Understood the working process of Dyeing MachineAble to understand the sugarcane productionServicing of Light Motor Vehicles | ||||
101. | Prabu Sangar G D(2016-2020) | |||||
102. | Praveen J(2016-2020) | |||||
103. | TNSTC Ltd, Dharmapuri | Tamil Nadu Government | 21-06-2017-23-06-2017 | 03 |
Kishore Kannan R(2016-2020) | Able to operate CNC machines |
104. | M/S.D.R Engineering | Private | 19-06-2017-22-06-2017 | 04 |
Pattabiraman M(2016-2020) | Gathered idea on manufacturing of rubber tiresTraining in Heavy vehicle servicingUnderstood the fabrication of aluminum and steelKnowledge about the pump designTraining in Heavy vehicle servicing |
105. | Surya V(2016-2020) | |||||
106. | Veniraja M(2016-2020) | |||||
107. | Senthil T A(2016-2020) | |||||
108. | Viswaaswaran J(2016-2020) | |||||
109. | M/S.Santha Engineering Pvt ltd, Coimbatore | Private | 19-06-2017-21-06-2017 | 03 |
Kumaravel M(2016-2020) | Training in Engineering servicesGathered knowledge in design of shafts and camshafts |
110. | Rooban Vengat T(2016-2020) | |||||
111. | Rajeshwaran S(2016-2020) | |||||
112. | M/S.Code Blind Technology, Chennai | Private | 19-06-2017-23-06-2017 | 05 |
Naveen Kumar M(2016-2020) | Gather knowledge in assembling of automotive vehicles |
113. | Nathin Bharat M(2016-2020) | |||||
114. | Nitish Kumar M(2016-2020) | |||||
Academic Year 2015-2016 | ||||||
1. | M/S.TVS (Shri Murugesan Motors), Theni | Private | 21-11-2016 -21-12-2016 | 31 |
Bharath S(2013-2017) | Servicing of Light Motor Vehicles |
2. | M/S.Ambal auto, Coimbatore | Private | 16-11-2016 -26-11-2016 | 11 |
Bharath Raj.B(2013-2017) | Servicing of Light Motor Vehicles |
3. | Gokula Krishan B(2013-2017) | |||||
4. | M/S.Amman Auto Garage, Hosur | Private | 13-06-2016-23-06-2016 | 10 |
Praveen A(2013-2017) | Servicing of Light Motor Vehicles |
5. | TNSTC Limited, Madurai | Tamil Nadu Government | 21-06-2016-28-06-2016 | 08 |
Logesh S(2013-2017) | Training in Heavy vehicle servicing |
6. | Aravind Sundar U (2013-2017) | |||||
7. | M/S.TITAN Company Limited, Coimbatore | Private | 22-06-2016-29-06-2016 | 08 |
Sree Kumar S(2013-2017) | Knowledge about the assembly and components of watches |
8. | Puviyarasu S(2013-2017) | |||||
9. | M/S.Vishal Precision Products, Coimbatore | Private | 08-12-2016-16-12-2016 | 09 |
Mathew Emmauel(2015-2019) | Able to operate CNC machines |
10. | Mohammed Ikram (2015-2019) | |||||
11. | M/S.ROOTS Pvt. Ltd., Coimbatore | Private | 01-12-2015-07-12-2015 | 07 |
Sreekumar S(2013-2017) | Gained knowledge on Floor cleaning machinery & horns |
12. | M/S.St Private |
10-12-2015-16-12-2015 |
07 Bharath Raj N(2014-2018) |
Understanding of steel manufacturing process |
| |
13. | Jawahar R(2014-2018) | |||||
14. | Krishna Prasath R (2014-2018) | |||||
15. | M/S.Inditex Processor, Erode | Private | 20-06-2016-25-06-2016 | 06 |
Ajith Kumar S(2014-2018) | Understood the process of Dyeing works |
16. | Thermal Power Station, Tuticorin | Tamil Nadu Government | 25-01-2016-29-01-2016 | 05 |
Kumaran M(2013-2017) | Understanding the thermal power plant operation |
17. | Thermal power station, Tuticorin | Tamil Nadu Government | 18-07-2016-22-07-2016 | 05 |
Subramanian A(2013-2017) | Understanding the thermal power plant operation |
18. | Vigneshwaran G(2013-2017) | |||||
19. | Vignesh B(2013-2017) | |||||
20. | Kumaresan S(2013-2017) | |||||
21. | Kavin Kumar R(2013-2017) | |||||
22. | Gowtham N(2013-2017) | |||||
23. | Gangadharan P(2013-2017) | |||||
24. | Nofal M(2013-2017) | |||||
25. | Tamilselvan G(2013-2017) | |||||
26. | M/S.Ashok Leyland, Chennai | Private | 05-07-2016-09-07-2016 | 05 |
Vignesh Kumar B (2013-2017) | Training in Quality manufacturing process |
27. | M/S.Chandra Honda, Coimbatore | Private | 19-12-2016-24-12-2016 | 06 |
Athivan Balaji Rc(2015-2019) | Servicing of Light Motor Vehicles |
28. | Gokula Krishan B(2015-2019) | |||||
29. | M/S.Brakes India Private Ltd, Chennai | Private | 20-07-2016-22-07-2016 | 03 |
Praveen Kumar S(2013-2017) | Able to Understand the automobile parts manufacturing |
30. | Shankar M(2013-2017) | |||||
31. | Prasanth M(2013-2017) | |||||
32. | Thermal power station, Mettur | Tamil Nadu Government | 26-07-2016-29-07-2016 | 04 |
Sumith Surendran(2013-2017) | Understanding the thermal power plant operation |
33. | Vetrivel S(2013-2017) | |||||
34. | Sethuramasamy P(2013-2017) | |||||
35. | Tamizhanban M(2013-2017) | |||||
36. | TNSTC Limited, Erode | Tamil Nadu Government | 25-07-2016-29-07-2016 | 05 |
Manikandan V(2013-2017) | Training in Heavy vehicle servicing |
37. | Gokul S(2013-2017) | |||||
38. | Jayahar M(2013-2017) | |||||
39. | Manikandan M(2013-2017) | |||||
40. | TNSTC Limited, Erode | Tamil Nadu Government | 20-06-2016-24-06-2016 | 05 |
Hariharan S(2013-2017) | Training in Heavy vehicle servicing |
41. | TNSTC Limited, Coimbatore | Tamil Nadu Government | 21-06-2016-28-062016 | 08 |
Harikrishna H(2014-2018) | Training in Heavy vehicle servicing |
42. | Kishore R(2014-2018) | |||||
43. | Dhanush M(2014-2018) | |||||
44. | Sabarish A(2014-2018) | |||||
45. | Harivignesh S(2014-2018) | |||||
46. | Lambert Godwin B (2014-2018) | |||||
47. | Kishore Krishna(2014-2018) | |||||
48. | M/S.Vinayagaa Motors,Tirupur | Private | 20-06-2016-25-06-2016 | 06 |
Tharun Kumar R(2014-2018) | Servicing of Light Motor Vehicles |
49. | Samuvel Y(2014-2018) | |||||
50. | M/S. SVS Precision tools,Hosur | Private | 11-06-201628-06-2016 | 18 |
Likith Reddy J(2014-2018) | Gather idea on fabrication of Sheet metal spares |
51. | M/S.Energo engineering projects Ltd,Coimbatore | Private | 20-06-2016-25-06-2016 | 06 |
Lavan Prasath E(2014-2018) | Understanding the manufacturing of solar panels |
52. | M/S.Beko Needle Mfg.Co, Coonoor | PrivatePrivate | 20-06-2016-25-06-2016 | 06 |
Nishar Ahamed N(2014-2018) | Knowledge about the Suture needles |
53. | Prasanth K(2014-2018) | |||||
54. | M/S.Chevrolet,Coimbatore | Private | 16-06-2016-23-06-2016 | 08 |
Monish K(2014-2018) | Servicing of Light Motor Vehicles |
55. | M/S.Dharshini Engineering, Coimbatore | Private | 13-06-2016-17-06-2016 | 05 |
Infenta Jasmine J(2014-2018) | Training on Welding process |
56. | M/S.Golden Hill Tea Plantations, Pandalur | Private | 20-06-2016-25-06-2016 | 06 |
Karthick L(2014-2018) | Knowledge about the Tea making machinery |
57. | M/S.Sri Bannari Amman Industries, Coimbatore | Private | 13-06-2016-01-07-2016 | 18 |
Prem Kumar R(2014-2018) | Interpret the process of Coconut Husk Removing Machine |
58. | M/S.Hailstone innovations Pvt. Ltd, Thirissur | Private | 13-06-2016-24-06-2016 | 11 |
Fredwin Porinchu(2014-2018) | Design and fabrication of mining equipments |
59. | M/S.Muvendhar Auto Garage, Coimbatore | Private | 22-06-2016-24-06-2016 | 03 |
Infant Raj A(2014-2018) | Servicing of Light Motor Vehicles |
60. | M/S.Ambal Auto, Coimbatore | Private | 15-06-2016-20-06-2016 | 06 |
Bhuvanesh R(2014-2018) | Servicing of Light Motor Vehicles |
61. | M/S.Sandhar Automotives, Bangalore | Private | 27-06-2016-02-07-2016 | 06 |
Thava Prakash(2014-2018) | Gather idea on fabrication of Sheet metal components |
62. | M/S.Bimetal Bearings, Coimbatore | Private | 05-12-2016-07-12-2016 | 03 |
Mathew Emmauel(2015-2019) | Interpret the design and fabrication of Engine bearings |
63. | Manickvasagam(2015-2019) | |||||
64. | M/S.Titan Company Ltd, Hosur | Private | 14-11-2016-18-11-2016 | 05 |
Sudharshan A(2014-2018) | Knowledge about the assembly and components of watches |
65. | Seema S(2014-2018) |
Internship
S.No | Industry | Incorporation Status | Date | Duration | Students | Outcome |
---|---|---|---|---|---|---|
Academic Year 2021 - 2022 | ||||||
1. | Mechathon Engineering Kanchipuram | Private | 21.06.2021 - 20.08.2021 | 50 | Yaswant Kumar K.P | - |
2. | INSTA3D Technologies Coimbatore | Private | 02.08.2021 - 14.08.2021 | 12 | Prasanth S | - |
3. | INSTA3D Technologies Coimbatore | Private | 02.08.2021 - 14.08.2021 | 12 | Prasath C | - |
4. | INSTA3D Technologies Coimbatore | Private | 02.08.2021 - 14.08.2021 | 12 | Pon Bala Siva Sankar N | - |
5. | INSTA3D Technologies Coimbatore | Private | 02.08.2021 - 14.08.2021 | 12 | Surya R | - |
6. | UNIQ Technologies Coimbatore | Private | 14.09.2021 - 29.09.2021 | 14 | Prasath C | - |
7. | UNIQ Technologies Coimbatore | Private | 14.09.2021 - 29.09.2021 | 14 | Prasanth S | - |
8. | UNIQ Technologies Coimbatore | Private | 14.09.2021 - 29.09.2021 | 14 | Pon Bala Siva Sankar N | - |
9. | UNIQ Technologies Coimbatore | Private | 14.09.2021 - 29.09.2021 | 14 | Surya R | - |
10. | UNIQ Technologies Coimbatore | Private | 29.09.2021 - 20.10.2021 | 14 | Raashid Ahmed J | - |
11. | UNIQ Technologies Coimbatore | Private | 29.09.2021 - 20.10.2021 | 14 | Raj Kumar K | - |
12. | UNIQ Technologies Coimbatore | Private | 29.09.2021 - 20.10.2021 | 14 | Vasudevan.A | - |
13. | UNIQ Technologies Coimbatore | Private | 25.10.2021 - 13.11.2021 | 14 | Vimalesh Gopal R.K | - |
14. | UNIQ Technologies Coimbatore | Private | 25.10.2021 - 13.11.2021 | 14 | Gowthaman S | - |
15. | UNIQ Technologies Coimbatore | Private | 25.10.2021 - 13.11.2021 | 14 | Deen Pradeeman R | - |
16. | UNIQ Technologies Coimbatore | Private | 25.10.2021 - 13.11.2021 | 14 | Manoj D | - |
Academic Year 2020 - 2021 | ||||||
1 | Desmaan, Coimbatore | Private | 25.01.2021 - 20.02.2021 | 25 | Yaswant Kumar K P | - |
2 | Desmaan, Coimbatore | Private | 25.01.2021 - 20.02.2021 | 25 | Manoj Kumar P | - |
Academic Year 2019 - 2020 | ||||||
1. | ROYAL SUNDARAM, CHENNAI | Private | 25.11.2019 - 06.12.2019 | 12 | DANIEL ARULANANDH.S | - |
2. | KANNAN TOOLS & DIES, COIMBATORE | 04.12.2019 - 13.12.2019 | 10 | NIVEDITHA NOBLE | ||
MAGESHWARAN.V | ||||||
NELSON JACOB.T | ||||||
3. | ELGI EQIUPMENT LIMITED, COIMBATORE | 20.11.2019 - 29.11.2019 | 09 | GRIFFIN SINGH A | ||
4. | PRABAL MOTORS PVT LTD, COIMBATORE | 26.11.2019 - 05.12.2019 | 10 | KOUSHIK RAJ K | ||
SREEJITH S | ||||||
SURYA R | ||||||
Academic Year 2018 - 2019 | ||||||
1. | INDIAN INSTITUTE OF TECHNOLOGY, Bombay | Government | Dec 2018 – May 2019 | 180 | DANUSH RAJ. D | - |
2. | INDIAN INSTITUTE OF TECHNOLOGY, Bombay | Government | Dec 2018 – May 2019 | 180 | THANISH ABRAHAM | - |
3. | INFODESIGN | Private | 17.12.2018 to 31.03.2019 | 110 | SANJAI V | - |
4. | INFODESIGN | Private | 17.12.2018 to 31.03.2019 | 110 | SUBRAMANIAN M | - |
5. | EDINBRIDGE | Private | 17.12.2018 to 31.03.2019 | 110 | SURESH KUMAR S | - |
6. | INFODESIGN | Private | 17.12.2018 to 31.03.2019 | 110 | THANGAVIJAY R | - |
7. | SEA BLUE SHIPYARD LTD | Private | 05.01.2019 to 05.02.2019 | 25 | KALIRAJESH N | - |
Academic Year 2017 - 2018 | ||||||
1. | INDIAN INSTITUTE OF TECHNOLOGY, GUWAHATI | Government | 16.05.2018 to 30.06.2018 | 38 | THANISH ABRAHAM | - |
2. | INDIAN INSTITUTE OF TECHNOLOGY, GUWAHATI | Government | 16.05.2018 to 30.06.2018 | 38 | SURIYA.S | - |
Academic Year 2016 - 2017 | ||||||
1. | M/S.Bull Machines, Pvt Ltd, Coimbatore | Private | 04.07.2016 - 04.08.2016 | 32 | Sree Kumar S (2013-2017) | Exposure to Construction equipments |
2. | Puviyarasu S A (2013-2017) | |||||
3. | Nizam M (2013-2017) | |||||
4. | M/S.Thai Summit Autoparts India Private Limited, Chennai | Private | 03-01-2017 - 21-01-2017 | 19 | Gowtham Das S (2013-2017) | Knowledge about the Automotive manufacturing process |
5. | Andy Mageshwaran Gowshihan (2013-2017) | |||||
6. | Karthick.S (2013-2017) | |||||
7. | M/S.Goodwin Motors, Chennai | Private | 06-07-2016 - 12-07-2016 | 07 | Siddharth Menon (2013-2017) | Practical Training in Automobiles |
8. | Sathish Kumar L (2013-2017) | |||||
9. | Srinath P (2013-2017) | |||||
10. | Sabarirajan S (2013-2017) | |||||
11. | Subash T (2013-2017) | |||||
12. | Suresh P (2013-2017) | |||||
13. | Vishnu Varadhan A (2013-2017) |
GALLERY

ICMR sponsored Two Days National Level Workshop on Biochemical Characterizationof the Cell- Biomaterial Interface for Medical Implants
04.10.2019

Two days Translational Research Workshop on Design and Fabrication of Patient Friendly Custom Medical Products by Additive Manfacturing Process
19.10.2019

CSIR Sponsored One Day National Level Workshop on " Manufacturing Strategies towards Sustainable Future"
13.10.2019

Industrial visit at Anna Aluminium Co Pvt Ltd
16.08.2019

CSIR Sponsored One Day National Level Workshop on " Recycling and Industrial Waste Management for Sustainable Waste Management"
01.08.2019

CSIR Sponsored One Day National Level Workshop on "Innovation in Renewable Energy & Clean Energy Production for Resilient Future"
18.07.2019

CSIR Sponsored One Day National Level Workshop on "Research Challenge and Opportunities in Advanced Computational Fluid Dynamics for Engineering Application"
11.07.2019

Faculty Development Program on Engineering Thermodynamics
20 - 25 May 2019

National Conference on Recent Advancement in Design, Automation and Intelligent Systems
23.03.2019

Indian Welding Society - Seminar
28.02.2019

Industry Expert Lecture Series
13.02.2019

DST – SERB sponsored One Day seminar of “Processing and Characterization of Multifunctional Green Composite Coating for Medical Equipments and Implants”
16.11.2018

Association Innagural - MECHLADOZ
11.08.2017

International conference in Recent Advancement in Design, Automation and Intelligent Systems
24.03.2016
Industry Interaction
Extension Activity
Name of the Event | Date | Co-ordinated by | No of Volunteers | Beneficiary | Outcome |
---|---|---|---|---|---|
Fresh Juice Distribution | 08.08.2021 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 3 | Public | Support to the public during Pandemic |
Face mask Distribution | 19.09.2021 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 3 | Public | Support to the public during Pandemic |
Food Distribution | 23.10.2021 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 2 | Public | Support to the public during Pandemic |
Rice and Grocery Item Distribution | 14.11.2021 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 5 | Public | Support to the public during Pandemic |
Tree Planting | 16-01-22 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 3 | Public | Support to the public during Pandemic |
Republic day celebration | 26-01-22 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 2 | Public | Support to the public during Pandemic |
Handover Face mask and Fresh Juce | 26.06.2020 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 3 | Public | Support to the public during Pandemic |
Handover Umbrella to Coimbatore City Police | 15.07.2020 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 5 | Public | Support to the public during Pandemic |
National Immunization Day 2021 | 19.01.2021 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 2 | Public | Support to the public during Pandemic |
National Immunization Day 2020 | 20.01.2020 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 6 | Public | Support to the public during Pandemic |
Construction of Toilet Block | 07.02.2020 | Dr.P.Sivaprakash in association with Rotary Club of Coimbatore Satellite & Dr.N.G.P. ITech | 4 | Public | Support to the public during Pandemic |
Distribution of plant sapping's | 03.05.2017 | Dr.K.Ravikumar Mr .S.Rajkumar |
30 |
Public | Expose the students on various aspects of environmental related issues. |
cleaning and plantation of palm tree seedsat AachanKulam, Neelambur, | 24.08.2017 | Dr.K.Ravikumar Mr .S.Rajkumar |
50 |
Public | Expose the students on need of water conservation and resources |
The skill base training on basics of plumbing, carpentry & welding | 08.02.2016 | Dr.K.Ravikumar Mr .S.Rajkumar |
15 |
School Students | Awareness on basics of engineering to the school students |
Plantation of 10000 plant sapping in mettupalayam road | 09.08.2015 | Mr .S.Rajkumar Mr R.Vijayakumar |
130 |
Public | Created awareness about the environmental degradation |
Mitrasangamam | 15.08/2015 | Dr.K.Ravikumar Mr .S.Rajkumar |
30 |
Rural school students | Knowledge sharing to rural students |
Preparation of Natural Manure from Kitchen Wastes | 05.07.2014 | Dr.K.Ravi Kumar | 92 |
P.U.M School,Kalapatti,Coimbatore |
Newsletter
- News letter Odd Semester 2021-2022
- News letter Odd Semester 2020-2021
- News letter Even Semester 2020-2021
- News letter Even Semester 2019-2020
- News letter Odd Semester 2019-2020
- News letter Even Semester 2018-2019
- News letter ODD Semester 2018-2019
- News letter Even Semester 2017-2018
- News letter ODD Semester 2017-2018
- News letter Even Semester 2016-2017
- News letter ODD Semester 2016-2017
- News letter Even Semester 2015-2016
- News letter ODD Semester 2015-2016
- News letter Even Semester 2014-2015
- News letter ODD Semester 2014-2015
- News letter 2013-2014
- News letter 2012-2013
Career Guidance Brochure
Consultancy Brochure
0 +
Graduates
0+
Student Projects
0+
Awards
0+
University Ranks
0+
MoUs

Our Eminent Recruiters
Alumni Voices

Dr. N.G.P. IT has always excelled in producing quality engineers with outstanding results. The infrastructure is great and provides an excellent atmosphere along with modern facilities which promote great learning environment and flexible schedules that suit to meet the needs of a student. My college has fulfilled all my requirements and helped me to groom and evolve as a professional. The faculty is a blend of experience and wisdom with energy and enthusiasm. Choosing Dr.N.G.P. IT proved to be an excellent decision because it became a catalyst for me to study in-depth about my passion and get acquainted with it. Joining this institution and studying civil engineering has not only helped me to get my desirable career but has also enabled me to stay updated with the latest, and well equipped to face the real world competition.
Ms.P.Sakthi Sanjana Batch: 2015-2019

DR.NGPIT has been nothing less than what I had hoped for. Supportive faculty, beautiful campus, quality education, real world experiences, and amazing friends. It's everything one needs from a college, and a network developed for life. The growth I have seen in myself due to NGP, is invaluable. It has taught me things far beyond bookish knowledge and helped me broaden my horizons. Not only do they conduct various technical quizzes and events, but also many nontechnical events as well, to test the all round development of the students. Students are encouraged to take initiatives and develop leadership skills, so that they can cope with the world outside the campus. The classes are very interactive and faculties ensure that every student understands what is being taught before proceeding. Throughout my 4 years of engineering at 'DR.NGPT ', I had countless opportunities to develop analytical skills, leadership and proactive thinking through various programs and events. Big thanks to all my faculty members and friends for this amazing journey at DR.NGPIT
Ms.D.Arunima Batch: 2015-2019

Hi. I am V. Sahana Sree from Department of Civil Engineering, Dr. N.G.P. Institute of Technology, Coimbatore. Dr. N.G.P. Institute of Technology is one of the best colleges in Coimbatore providing excellent education for the students to make them as a skilled and efficient engineers.
Since I was very much interested to know about the technologies involved in the construction industry and to become an entrepreneur in the field of construction, I selected Civil Engineering. But then I didn't have an idea of which college to choose like I had in selecting my course. So, I was referred to this college by one of my relatives. Then, I visited the college once before joining . I was very much impressed with their infrastructure, learning environment and had all the facilities required for the students. And I decided to join in this college with the hope that it will be a right path to reach my destination.
I would say that my college days has given me many precious moments to be treasured in my life. My journey in this college wouldn't be possible without the support and encouragement of my teachers. Apart from academics, my department always takes an extra effort by providing us opportunities like software training, Industrial visits, In-plant training, mini projects, internships, etc. to develop our skills required to match the needs of industry. They also conducted many seminars, guest-lectures and conferences to gain knowledge on all the aspects and recent trends of Civil Engineering. All these made my learning experience very interesting and helped me to expose the best out of me. They also provided us with ample of job opportunities from many reputed companies like SMEC, Kef Kattera, Trikaal, CAD Technologies, etc. and I got placed as a Detailing Engineer in Trikaal Tech Enterprises Pvt Ltd.
After 4 years of college, it makes me feel that I have selected a right college and I am elated for being a part of it. I also thank for giving me an opportunity to share my views.
Ms.V. Sahana Sree Batch: 2015-2019

Being a part of Dr. N. G. P. Institute of Technology has always been a fascinating experience. Enthusiastic faculty members, supportive seniors and friends, encouraging management, all together enriched my journey in this institute. The entire ambiance makes it convenient for any student to inculcate the positive spirit to stand out amongst the most talented and hard-working engineers. In addition to professional training, they also serve as a platform to exhibit talent in sports and other extra curricular activities, which helps in an overall development of a student. The amount of growth I have seen in myself at the end is inestimable. Without any ambiguity, as a result of everything I mentioned above, I have been able to renovate myself into a more confident individual.
R. Manjusha Batch: 2012-2016

It's great honor for me to be a part of Dr. N.G.P. IT family to learn, excel and put into practice. The college has given me the guidance to follow the right path in my career by providing me with excellent internship opportunities.
Amir RasulMustafha. S Batch: 2011 - 2015

Learning starts with experiments. N. G. P.IT was a platform to do experiments with myself. The invigorating principal, HOD and staffs have always been there with me as my support for all experiments on my talents. ICTACT, NI and of course Tech fest was few which was a mirror to show what is with me. N. G. P.IT for me is a great place of opportunity provider if we hunt for it. A place to grow! A place to learn!
S.Nagavenkateswari

Dr.N.G.P. IT is one of the very few institutions which offer's quality education, packaged with the right mix of experienced faculty, inculcating the need for overall personality development and providing the required industrial exposure among the aspiring young minds, thereby moulding them to face the challenges of the outside world. Dr.N.G.P. IT has definitely helped me explore my potential and had given me a platform to exhibit the same and had been instrumental in my successful career."
T.Parthasarathy Batch: 2011-2015

For me, studying at Dr.NGP IT turned out to be an immense treasure of experience and knowledge. My college days are the best part of my life. Doing B.E-ECE gave me a deep insight in the subjects, which is now being proved fruitful in my career. My department encouraged me to explore my talent and potential by providing an exceptional integrated learning environment. I am really grateful to my teachers who have changed my whole aspect towards learning. I express my heartfelt thanks to the institution for giving me the perfect opportunity to explore myself. I am grateful to be a part of such an institution
R.Sunandhini Batch: 2010-2014

Thanks for giving me the opportunity to share about my experience with our institution during my college days. It was the place where I developed personally and professionally. It had given a great start to career.
I would like to thank my staffs who had imparted strong knowledge and values to me feel blessed being a student of our institution.
M.Panneerselvam Batch: Batch: 2010-2014
Activities
The IQAC has been formally inaugurated on 14th March 2014 and it monitors the internal quality aspects pertaining to academic, curricular and cocurricular activities for the welfare of the students within the existing academic and administrative systems.
With the rapidly changing scenario in industry and academia, the need for these two sectors to work in tandem is necessity for the present and more so for the future. IIPC was formed under the aegis of the AICTE, in 2011, to provide a platform for interaction between Industry and Institute.
The center for Teaching and learning inaugurated in January 2019, with the audio/ video recording facilities with an investment of cost Rs 13 Lakh. Center for teaching and learning offer professional development services for students and faculties, particularly to help them improve their careers plans. Also help to overcoming obstacles to effective teaching and learning often requires more than teachers and students can accomplish individually. Programs, workshops, courses, tutors and mentors are among the many resources we provide to help with educational pursuits at Dr.N.G.P. Institute of Technology.
- To provide a synergetic massive learning exchange platform with personalized learning environments to leverage technology to disseminate engineering education.
- To create a scalable, sustainable, simulated, scenario based, experiential, experimental and elemental (real-life) learning eco-system at the institution to impart effective engineering education.
MATHWORKS ACADEMY provides Campus-Wide access of the MATLAB software to use the latest versions of MATLAB and Simulink and other MathWorks products to support the course work and research for the benefit of faculty members and Student. The Institute deploys MATLAB and Simulink anywhere access for Students, Educators, and Researchers. The institute has signed an agreement with MathWorks that provides all of our students, educators, and researcher's campus-wide access to MATLAB, Simulink, and additional products. It has joined with more than 700 schools worldwide already using the MathWorks Campus-Wide License.
Ministry of Human Resource Development (MHRD), Govt. of India has established 'MHRD's Innovation Cell (MIC)' to systematically foster the culture of Innovation amongst all Higher Education Institutions (HEIs). The primary mandate of MIC is to encourage, inspire and nurture young students by supporting them to work with new ideas and transform them into prototypes while they are informative years.
