.

MECHLADOZ Association

MECHLADOZ of Mechanical Engineering Department is an organization formed by the students that works for the students since 2010. The basic aim of MECHLADOZ is to enrich students with different qualities to add dimensions to their personality so that every student emerges as multifaceted engineer in the society. Every Mechanical Engineering student at the start of the second year is a member of MECHLADOZ. Mentored by the faculty members of the Mechanical Engineering department, students take upon many initiatives that prepare them to face the challenges of the future. MECHLADOZ brings about the technical development of students by organizing seminars, workshops, conferences, industrial visits and other activities and also to improve non-technical abilities of students. MECHLADOZ seeks to be an active organization of Dr.N.G.P. Institute of Technology which promotes the career interests of the students.

Office Bearers - Academic Year 2022-23

S No Name Register No Responsibilities Year / Section

1.      

President

710719114005

DAVID TEDDY SAMUEL T

IV Year

2.      

Secretary

710719114035

RAVIVARMAN R

IV Year

3.      

Joint Secretary

710720114014

KAVIN BALA N

III Year

4.      

Treasurer

710719114022

MOHAMED IRFAN M

IV Year

5.      

Executive Member

710719114012

GOKUL KRISHNAN B

IV Year

6.      

Executive Member

710720114313

INDURADHANUSH N

III Year

7.      

Executive Member

710720114020

RAJADURAI S

III Year

8.      

Executive Member

710720114306

DHARSHAN K

III Year

9.      

Executive Member

710721114013

KAVIN R

II Year

10.   

Executive Member

701721114021

NAVEEN KUMAR D

II Year


Duties and responsibilities of office bearers


Student President

  • Supervising all student association meetings.
  • Overseeing the process of student organization event planning.
  • Completing all student organization purchase requests.
  • Maintaining a current list of email address and mobile numbers of the Association office bearers .
  • Submitting a detailed report on association activities at the end of every semester.
  • Coordinating with secretary, treasurer, and other executive council members of the association and maintain discipline among the students

Student secretary

  • Supervising student association meetings in the absence of the President .
  • Assisting the President with the oversight of the student association including fundraising, event planning, etc.
  • Working with the student association treasurer to prepare an annual budgets.
  • Scheduling locations for meetings and events.
  • Coordinating with the Treasurer in association fund raising efforts.
  • Coordinating with other bearers and executive council members of the association and maintain discipline among the students.

Student treasurer

  • Preparation of students association annual budget.
  • Monitoring the budget.
  • Submission of annual financial report.
  • Tending to the status of all purchase requests.
  • Collection of association fund from all the students and deposit in the students association account.
  • Payment of bills.
  • Keeping records for all financial transactions.
  • Preparation of monthly financial report and documents and inform about the financial status.

Student joint secretaries

  • Establishing duties of the president, and secretary.
  • Coordination with the office bearers of the association in performing various association related activities.
  • Coordination with the executive council members of the association in performing various association related activities.
  • Developing and administering the student association budget.
  • Fund raising from external agencies.

Association Activities

Date Event/Programme Topic Chief Guest, Designation
Academic Year 2022-2023
08/10/2022 Hands-on Training  Designing & Drafting of Mechanical - Electrical - Plumbing (MEP) Mr.Akshai Prakash & Mohammed odris,
Design Engineer,
HVAC & MEP,
AGHORA Design Academy,
Coimbatore.

24/09/2022

Workshop on Standardization in New Product Development

Standardization & Quality Ecosystem Dr.B.Sathish Kumar,
BIS - Mentor,
Head of the Department,
Sri Krishna Polytechnic College, 
Coimbatore.
Standards Drafting Dr.N.Srinivasan,
BIS - Mentor,
Associate Professor,
Jansons Institute of Technology,
Coimbatore 
22/09/2022 
to
 23/09/2022
Boot Camp Two Days Boot Camp on Autodesk Fusion 360 for Design Challenge under Naan Mudhalvan Project Scheme Dr.V.Prasath, 
Educational Programme Specialist,
Autodesk India Pvt. Ltd,
Bengaluru
10-09-2022 GATE Awarness Programme Career Guidance on Opportunities through GATE after B.E / B.Tech Mr.K.Rajesh,
IMS GATE Academy,
Coimbatore
10-09-2022 Abroad Education Program An Overview on Higher Education in abroad countries through IELTS and GRE Examinations Mr.K.Kannan,
Head - Student awarness,
IMS Academy,
Coimbatore
02-09-2022 Guest lecture Guest Lecture on "Entrepreneur - A Futuristic Choice" Mr.V.S.Sudhakar, 
Managing Director,
Anuswaryaa Enterprises Pvt.  Ltd,
Coimbatore.
02-09-2022 Assiciation Inauguration  MECHLADOZ - Association Inauguration  Mr.V.S.Sudhakar, 
Managing Director,
Anuswaryaa Enterprises Pvt.  Ltd,
Coimbatore.
17/08/2022 GATE Awarness Programme Opportunities after Engineering through GATE & ESE Mr.Shankar Jarasandh Wadne, 
GATE / ESE Faculty,
ACE Engineering Academy,
Hyderabad.
28/07/2022 Workshop One Day Workshop on " Sheet Metal  Design" Mr.N.Venkatraman,
Design Head,
CAD Technologies,
Coimbatore.
Academic Year 2021-2022

04/06/2022

Seminar

One Day Seminar on "Design and Development of E-Vehicle"

Mr.Alagarsamy Rajamanickam,
CEO & Founder,
Mechnido,
Coimbatore.

24/05/2022

GATE Awarness Programme

Career Opportnities through GATE after B.E /B.Tech 

Mr.K.Rajesh,
GATE Trainer,
IMS GATE Academy,
Coimbatore.

05/05/2022

CSIR Sponsored One Day National Level Seminar on “Bio-Tribology and Nano Tribology for Medical and Industrial Applications”

Tribology in Manufacturing & Industrial Systems

 Dr.LEO DEV WINS K
Professor
Department of Mechanical Engineering
Karunya Institute of Technology and Sciences
Coimbatore- 641114

Bio-Tribology

 Dr.SHANKAR S
Professor
Department of Mechatronics Engineering
Kongu Engineering College
Erode -638060

Tribology for Nano Materials

Dr.YOGANANDH J
Associate Professor
Department of Mechanical Engineering
Sri Ramakrishna Engineering College
Coimbatore – 641 022

25/04/2022

Faculty Development Program

Five Days FDP on  "Product Design Engineering using Fusion 360"

Mr.S R Deviyaprasanth                    
Senior Technical Trainer
ICT Academy  

29/04/2022

21/04/2022

Webinar

Challenges and Opportunities in next generation Industries

Mr.P.Saravanakarthik,
Managing Director,
Robotica FA solutions,
Coimbatore.

05/04/2022

Guest Lecture

Metallurgy for Mechanical Engineers

Dr.C.Vanitha,
Associate Professor,
Department of Metallurgical & Material Engineering · 
National Institute of Technology, 
Warangal - 506004, 
Telangana, 
INDIA

10/03/2022

International Conference

AICTE sponsored International conference on Design, Manufacturing and Materials Engineering 

1. Dr.S.Mahto Professor & Head, NERIST, Nirjuli.
2. Dr.C.Pandivelan Asso. Professor,VIT University,  Vellore.
3. Dr.B.Singaravel Professor, Vignan Institute of Technology,    Hyderabad.
4. Dr. D.Chakradhar, Associate Professor, IIT Palakad.
5. Dr.A.K.Sahoo,  Director,  Kalinga Institute of Sciences, Odisha.
6. Dr. C.Sathyanarayanan, Associate Professor, NIT Trichy.
7. Dr.T. Niranjan,Asso. Prof, MGIT, Hyderabad.
8. Dr. M.Giriraj,Associate Professor, VIT Univesrity, Vellore.
9. Dr.M.Chandraekharan,  Professor / Mech NERIST, Nirjuli.  
10. Dr.K Rameshkumar, Professor and Vice-chairperson (UG),  Amrita School of Engineering, Coimbatore, Tamilnadu.
11. Dr.Ambirish Maurya, Asso. Prof  National Institute of Technology, Patna.
12. Dr.KM. Senthilkumar, Professor / Mech Engg Kumaraguru College of Technology, Coimbatore, Tamilnadu.
13. Dr.K.Maniraj, Professor,  Kalaignar Karunanidhi Institute of Technology,  Coimbatore.
14. Dr.TV .Arjunan, Professor and Head,, Guru Ghasidas Viswavidyalaya (Central University), Bilaspur (C.G).

03/01/2022 - 08/01/2022 ONLINE SIX DAYS FDTP on "ME8692" - "FINITE ELEMENT ANALYSIS" Introduction to Finite Element Analysis Dr.T.Ramesh,
ASP-MECH,
NIT Tiruchirapalli
2D Scalar variable Problems Dr.S.Senthil Kumar,
Associate Prof. - Mechatronics,
Akshaya College of Engineering and Technology,
Coimbatore
Isoparametric Formulation Dr.K.Venkatesh Raja,
ASP-MECH, Sona College of Technology, Salem
2D Scalar variable Problems Dr.M.Thirumalai muthukumaran,
AP II - MECH, Kumaraguru College of Technology , Coimbatore
2D Scalar variable Problems Dr. K.S.Vijay Sekar,
Prof. & Head-MECH, Sri Sivasubramaniya Nadar (SSN) College of Engineering, Kalavakkam
2D Vector variable Problems Dr.M.Thirumalai muthukumaran,
AP II - MECH, Kumaraguru College of Technology , Coimbatore
Introduction to CAE Techniques for new product design Dr.M.Piramanandhan,
Sr.Engg Manager-R&D
ESAB India (p) Ltd, Kancheepuram
One Dimensional Problems Dr.Vidya Chandran,
ASP-MECH, SCMS School of Engineering and Technology, Ernakulam

Variational Formulation of Boundary Value Problems - Weighted residual methods
Dr. P. Nandakumar,
ASP-MECH, SRM Institute of Science and Technology (Deemed to be University),
Kattankulathur
Isoparametric Formulation Dr.K.Venkatesh Raja,
ASP-MECH, Sona College of Technology, Salem
Basic concepts of the Finite Element Method –
Ritz Technique
Dr.G.Suresh Kannan ASP-MECH,
Coimbatore Institute of Technology, Coimbatore
Introducing ANSYS Classic approach to problems on 1D & 2D elements Dr Mangesh S Kotambkar,
AP-MECH,
Visvesvaraya National Institute of Technology,
Nagpur
Introducing ANSYS Classic
approach to problems on 3D elements
Dr Mangesh S Kotambkar,
AP-MECH, Visvesvaraya National Institute of Technology, Nagpur
2D Vector variable Problems Dr.M.Thirumalai muthukumaran,
AP II - MECH, Kumaraguru College of Technology , Coimbatore
One Dimensional Problems Dr.Vidya Chandran, ASP-MECH,
SCMS School of Engineering and Technology, Ernakulam
Emerging Pedagogy Dr. S.Renukadevi,
Prof - Engineering Education, Head-Centre for Academic studies and Research,
NITTTR, Chennai
18/12/2021 Guest Lecture Application of Thermodynamics in Automobile Mr.V.Sreenivasan,
Diagonistic Engineer,
Robert Engineering and Business Solutions Private Limited,
Banglore
30/11/2021 Workshop One day Workshop on “Designing & Draughting of Mechanical – Electrical – Plumbing (MEP)” Mr.V.Jayaprakash - Senior Designer
Mr.C.Sandeep Ajeeth Raja - Operations Head
AGHORA Design Academy - Coimbatore
27/11/2021 Virtual Training Virtual Design Now Workshop in Autodesk Fusion 360 Mr. S.R.Deviyaprasanth
Senior Technical Trainer
Training and Development
ICT ACADEMY
Chennai.
25/11/2021 Webinar Online Webinar on " ADVANCEMENT IN POLYMERIC COMPOSITES FOR ARMOUR APPLICATIONS" Dr. J. Naveen,
Senior Assistant Professor,
School of Mechanical Engineering,
VIT University, Vellore.
22/11/2021 Webinar Online Webinar on "Advances in Welding Processes" Dr.M.Venkatesen,
QA/QA - Mechanical, Head Quaters,
B&F IC , L&T Constructions,
Chennai
19/11/2021 Webinar Online Webinar on "Challenges and Opportunities in Mechanical Engineering Industries" C. Puliyurudayan
Managing Director,
Cleartek Filters Pvt ltd, Coimbatore
18/11/2021 Webinar Online Webinar on "Internet of Things in Mechanical Engineering” Mr.T.Saravana Prabhu
Senior Software Engineer,
Cognizant Technology Solutions,
Coimbatore.
13/11/2021 Webinar One Day Webinar on "Advanced Materials Characterization Techniques" by Smart Manufacturing Club Dr.M.Veena,
Dr.D.S.Kothari Post Doctoral Fellow,
Department of Nano Science and Technolgy,
Bharathiyar University, Coimbatore.
08/11/2021 Webinar Online Webinar on "Recent Advances and Scope of Autodesk Fusion 360 in Additive Manufacturing" Mr.Rohit Chandran,
Educatio Engagement Specialist,
Autodesk India.
25/09/2021 Webinar One Day Webinar on "Industrial Automation with its Applications" in Association with Smart Manufacturing Club, Dr.N.G.P.ITech Mr.Sriram Nagarajan,
CEO, ROBORAM Private Limited, Nagercoil
25/09/2021 Seminar One Day Seminar on "PLANNING OF EXPERIMENTS" Dr.S.Balasubramanian
Associate Professor / Mechanical Engineering Kumaraguru College of Technology, Coimbatore
25/09/2021 Workshop One Day Workshop on "Impact of CAD CAM Softwares in Industry 4.0" Mr.S.Pratheep,
CAD Engineer, CADD Technologies, School of Design Private Limited, Coimbatore
23/09/2021 Online Quiz Competition Online Quiz Smart Manufacturing Club,
Dr.N.G.P. ITech
28/08/2021 ASSOCIATION INAUGURATION of "MECHLADOZ" ASSOCIATION INAUGURATION Mr.A.Natarajan
Head – Materials, SAMUDRA Pumps, Coimbatore
Academic Year 2020-2021
14.06.2021 National E-Conference National E-Conference on “Recent Advancements in Design, Automation and Intelligent” – “RADAIS-2K21” Dr.R.K.Elangovan
Director General, Director General, DGFASLI, Ministry of Labour and Employment, Government of India, Mumbai – 400022.
02.06.2021 to 04.06.2021 Three Days online on FDP on Application of Artificial Intelligence in Mechanical Engineering AI : Opportunities and Challenges Dr DEEPAK GARG
Director leading India.AI & NVIDIA-Bennett Center of Research on Artificial Intelligence, Bennett University, Greater Noida, Uttar Pradesh, INDIA
An Intelligent COBOTIC System in Smart Manufacturing Dr. KAUSHIK KUMAR
Associate Professor, Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi, Jharkhand, INDIA
Application of soft computing algorithm and its scope in the research Dr. S.K. TAMANG
Assistant Professor, Department of Mechanical Engineering, North Eastern Regional Institute of Science and Technology, Arunachal Pradesh,INDIA.
AI Techniques in Industrial Automation Environment Mr. SRIRAM NAGARAJAN
CEO, ROBOARM , Nagercoil
Intelligent Vibration Signal Processing for Condition Monitoring. Dr. KAUSHIK KUMAR
Associate Professor, Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi, Jharkhand, INDIA
Application of Data Science Analytics Mr.Manoj Singh
Sr Analytical Training Consultant, SAS R&D (India) Pvt. Ltd,Bandra (East), Mumbai.
27.05.2021 to 26.06.2021 One Month Online GATE Training Programme GATE Training Programme Mr.Gaurav Lohar
trainer, THE GATE ACADEMY, Coimbatore.
26.05.2021 to 27.05.2021 Two Days Virtual Workshop on “AUTODESK FUSION 360” AUTODESK FUSION 360 Mr. AADITHYA S B
Chief Software Operations-Manufacturing, USAM CADSoft India Pvt.ltd., Coimbatore-641012
24.05.2021 to 29.05.2021 CENTRE FOR FACULTY DEVELOPMENT ANNA UNIVERSITY SPONSORED ONLINE SIX DAYS FACULTY DEVELOPMENT TRAINING PROGRAMME on MF8071 ADDITIVE MANUFACTURING (R 2017) Overview – Need - Development of Additive Manufacturing Technology -Principle – Dr.Rajesh Ranganathan
Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore.
AM Process Chain- Classification –Rapid Prototyping-
Drop on Demand mode – Three Dimensional Printing – Advantages Droplet formation technologies – Continuous mode Mr.Mohammed Basheer
Managing Partner, INSTA3D Technologies LLP Coimbatore, Tamil Nadu.
AM unique capabilities – DFAM for part quality improvement Dr.D.Balaji
Assistant Professor (SL.G), Department of Mechanical Engineering, KPR Institute of Engineering & Technology, Coimbatore,
Design tools: Data processing - CAD model preparation – Part orientation and support structure generation Dr.G.SivaKumar
Assistant Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore 641 014, Tamil Nadu
Model slicing –Tool path generation- Design for Additive Manufacturing: Concepts and objectives-
Customized design and fabrication for medical applications Dr.R. Suresh Jayabalan
Department of Neuro Surgery, Kovai Medical Center and Hospitals, Coimbatore.
Photo polymerization: SLA-Photo curable materials – Process - Advantages and Applications Manjaiah M
Professor, Department of Mechanical Engineering, National Institute of Technology, Warangal.
Powder Bed Fusion Techniques
SLS-Process description – powder fusion mechanism Dr. Anbuudayasankar
Professor, Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Coimbatore.
Process Parameters – Typical Materials and Application. Electron Beam Melting
Extrusion Based System: FDM-Introduction – Basic Principle – Materials – Applications and Limitations Dr. S. Kanmani Subbu
Assistant Professor, Department of Mechanical Engineering, IIT, Palakkad.
Bioextrusion. Sheet Lamination Process:LOM- Gluing or Adhesive bonding – Thermal bonding.
Outcome Based Education Dr.Poorachandra
Director, Sri Shakthi Institute of Engineering & Technology
Rapid Tooling – Rapid Manufacturing – Applications Benefits Dr. Y. Ravi Kumar
Professor, National Institute of Technology, Warangal.
Case studies
Bioplotter - Beam Deposition Process Mr.Mahesh
Business Manager, V Engineering Solution & V Dent Labs, Erode
LENS- Process description – Material delivery – Process parameters – Materials – Benefits – Applications.
10.05.2021 to 14.05.2021 A Five Days Online Faculty Development Programme on “Novel Materials and Manufacturing Processes in Industrial Applications”
Bio Fuels for SI Engines
Dr.T.Saravana Kannan
Senior Lecturer, Faculty of Engineering, Computing & Science, Swinburne University of Technology, Malaysia.
Welding of Nickel based Super Alloys for High Temperature Applications
Dr.B.Arulmurugan
Assistant Professor (SL.G), Department of Mechanical Engineering, KPR Institute of Engineering & Technology, Coimbatore, Tamilnadu.
Additive Manufacturing Dr.R.S.Kanmani Subbu
Assistant Professor, Department of Mechanical Engineering, IIT, Palakkad, Kerala.
Methods for Manufacturing Medical Implants Dr.R.Ranjith
Assistant Professor,
Department of Mechatronics Engineering,
SNS College of Technology,
Coimbatore, Tamilnadu.
Preparation and Characterization of Aluminium Matrix Composites Dr.C.Samson Jerold Samuel
Associate Professor, Mechanical Engineering,
Sri Krishna College of Engineering and Technology, Coimbatore
Vision for Material Synthesis Freedom using Additive Manufacturing - A walkthrough Dr.D.Balaji
Assistant Professor (SL.G), Department of Mechanical Engineering, KPR Institute of Engineering & Technology, Coimbatore.
Recent Advancements in Additive Manufacturing Processes Dr.M.Thirumalai muthukumaran
Assistant Professor II, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore
Friction Stir Technologies Dr.R.Sathishkumar
Assistant Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore.
Biomaterials and its Applications Dr.D.Velmurugan
Associate Professor, Department of Mechanical Engineering, Muthayammal Engineering College, Rasipuram, Tamilnadu
Additive Materials Dr.G.Sivakumar
Assistant Professor,
Department of Mechanical Engineering,
Coimbatore Institute of Technology, Coimbatore,
Tamilnadu.
28.04.2021 to 30.04.2021 Online Faculty Development Program on “Research Prospects in Mechanical & Allied Engineering” Preparing a Research Manuscript for Scholarly Publications
Dr.S.SIVAMANI
Lecturer , Chemical and Petrochemical Engineering Section, Engineering Dept.
Salalah College of Technology, Oman
Composite Materials – Research Perspective Dr.M.Makesh Kumar
Assistant Professor Department of Mechanical Engineering KPR Institute of Engineering & Technology Coimbatore.
Recent Advancements in Additive Manufacturing Dr.V.Ezhilmaran
Assistant Professor (Sr.Gr) Department of Mechanical Engineering MEPCO SCHLENK Engineering college , Sivakasi.
Intellectual Property – A Tool for Revenue from Research Mr.Prem Charles
Inanse IP & Consultancy Services Managing Director Allinnov R&D. (P). Ltd., India
Applications of CFD in Renewable Energy Research
Dr.Vidya Chandran
Associate Professor Department of Mechanical Engineering
SCMS School of Engineering & Technology, Ernakulam
Research Prospects in Welding Processes Dr.M.Sowrirajan
Associate Professor Department of Mechanical Engineering Coimbatore Institute of Engineering & Technology, Coimbatore.
15.02.2021 to 19.02.2021 AICTE sponsored one week on line short term training program on “Innovation in Materials and Industrial Automation” (Phase-III) Flexible Manufacturing Systems (FMS) Dr.M. CHANDRASEKARAN
Professor/Mech North Eastern Regional Institute of Science and Technology Arunachal Pradesh
Robotic solution for Agriculture Dr. PASUPATHY S A
Professor & HOD Department of Control systems and robotics Kumaraguru College of Technology Coimbatore, Tamil Nadu 641049
Material Characterization Dr.Vijay S J
Associate Professor, Department of Mechanical Engineering, Centre for Research in Metallurgy, Karunya Institute of Technology and Sciences, Coimbatore - 641114
Materials Joining and additive manufacturing Dr.S. Jerome
Assistant Professor Metallurgical and Materials Engineering NIT,Trichy
Development of Surface Composites Dr.R.Sathiskumar
Assistant Professor Department of Mechanical Engineering Coimbatore Institute of Technology, Coimbatore-641014
Development of Magnesium composite Dr Srinivasan A
Principal Scientist CSIR – National Institute for Interdisciplinary Science and Technology (NIIST) Council of Scientific & Industrial Research (CSIR), Ministry of Science and Technology, Govt of India . Industrial Estate PO, Thiruvananthapuram, Kerala 695019
Robotic Welding Dr.N.Mururgan
Professor, Robotics and Automation P S G College of Technology, Coimbatore 9751824123 drnmurugan@gmail.com
Surface Treatment on Materials Dr.V.MUTHUKUMARAN
Professor/Mech, Kumaraguru College of Technology, Coimbatore-641049
Industrial Automation Dr.M.Piramanandhan
Manager-R&D(ESD) ESAB India (p) Ltd, Chennai
Optimization Techniques Dr. R. Parameshwaran
Chief Coordinator (TBI & IIC) Professor, Mechatronics Engineering Kongu Engineering College, Perundurai- 638060
3D Printing Technologies and its characteristics Mr.Joseph Mathew
Managing Director, INSTA3D TECHNOLOGIES LLP, Ramanathapuram,
Coimbatore - 641 045.
14.12.2020 to 19.12.2020 AICTE sponsored one week on line short term training program on Innovation in Materials and Industrial Automation (Phase-II) World of Artificial Intelligence Dr. N.Dharmaraj
Team Lead &Senior Analyst, Hubbell India.
Burndy Technology & Global Service Pvt.Ltd, Chennai
Dharmaraj.N@gmail.com
Mobile: 9962992597
Advanced Joining process in Industrial applications Dr.M.V.Venkatesan
QA/QC -Mechanical, HQ, B&F IC, L&T Construction, Chennai.
mvv@lntecc.com
Mobile: 8754471176
Materials and Joining process in Nuclear Industry Dr.B. Arivazhagan
Scientific Officer -E, Materials Technology Division, Indira Gandhi Centre for Atomic Research, Kalpakkam-603102
9840163347
arivu@igcar.gov.in
Annealing effect on Selective Laser Melted Ti-6al-4v Alloy Dr.C.Vanitha
Associate Professor, Dept. of Met. & Mate. Engg. NIT Warangal, TS
Mob:8332969385
vanitha@nitw.ac.in
Characterization of Insitu composites Dr.A.Mahamani
Professor, Sri Venkateswara College of Engineering and Technology, Chittoor 517127,(A.P)
6300256313
mahamanisudhan@gmail.com
IOT for Industrial Automation Dr. A. Prasanth
Young Scientist & Assistant Professor, PSNA College of Engineering and Technology.
9159686372
draprasanthdgl@gmail.com
Process innovation in Manufacturing of composite materials Dr.R.Sasikumar
Director - Research , Selvam College of Technology, Namakkal.
9443874292
sasi_kalipatty@yahoo.co.in
Robotic spot welding for automotive application Dr.K.Asokkumar
Additional General Manager & Deputy Head, Centre of Excellence in Welding Engineering and Technology, PSG College of Technology Peelamedu,Coimbatore.
94426 49147
Email: agm.coew@psgtech.ac.in, kasokku@gmail.com
Materials for Aerospace applications Dr. Govindaraju M
Assistant Professor, Mechanical Engineering, Amrita School of Engineering, Coimbatore.
9440727051
m_govindaraju@ch.amrita.edu
Material characterization Dr.G. Suganya Priyadharshini
Assistant Professor, Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore.
9843980133
suganyapriyadharshini.g@cit.edu.in
Research scope in Metal Additive Manufacturing Dr T Ram Prabhu
Deputy Director / Scientist, DRDO, Bengaluru,
Mob: 9535531407
ramprabhu.t@gmail.com
19.10.2020 to 23.10.2020 AICTE sponsored one week on line short term training program on Innovation in Materials and Industrial Automation (Phase-I) Innovation in Materials Dr. S. Kanmani Subbu
Assistant Professor, Mechanical Engineering, Indian Institute of Technology, Palakad, Kerala 678557.
sksubbu@iitpkd.ac.in
Light Weight Materials-Formability Dr.D. Ravi Kumar
Professor, Department of Mechanical Engineering, Indian Institute of Technology, Delhi Hauz Khas, New Delhi 110016.
Digavalli.Ravi.Kumar@mech.iitd.ac.in
dravi.iitd@gmail.com
Surface Coating on Materials Dr.Ramesh M R
Associate Professor /MECH, National Institute of Technology Karnataka, Surathkal P. O. Srinivasnagar, Mangalore - 575 025 Karnataka, India.
rameshmr @ nitk.edu.in
ramesdmt@ gmail.com
Different joint configuration by Friction Welding Dr. P.Sathiya
Professor, Department of Production Technology, National Institute of Technology ,Trichy- 620015
psathiya@nitt.edu
Wire Arc Additive Manufacturing Dr.N.Mururgan
Professor, Robotics and Automation, P S G College of Technology, Coimbatore
drnmurugan@gmail.com
Metal 3D Printing- Challenges Dr. V. ANANDAKRISHNAN
Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirappalli - 620 015.
krishna@nitt.edu
Rubber-Nano composites Dr.P.Jawahar
Assistant Professor, Department of Mechanical Engineering National Institute of Technology, Agartala, Tripura-799046
Dr.p.jawahar@gmail.com
Modeling of Smart materials-Piezo electrics Dr. Jayabal K
Associate Professor, Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram- 600 127.
jayabal@iiitdm.ac.in
Development FSW Process Dr. Ramachandran K K
Professor, Department of Mechanical Engineering, Government Engineering College, Thrissur, Kerala.
kkramachandran@gectcr.ac.in
Information in Digital Manufacturing Dr.Sivasakthivel P S
Associate Professor, Sastra Deemed University, Thanjavur-613401.
sivasakthivelmech.sastra.edu
Application of Friction Stir Processing Technology Dr.R.Sathiskumar
Assistant Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore-641014.
sathiskumar.r@cit.edu.in
19.10.2020 to 23.10.2020 AICTE TRAINING AND LEARNING (ATAL) sponsored Faculty Development Program on "Exploring Additive Manufacturing in Healthcare Applications" Inauguration Additive Manufacturing in Health Care - with Live Case Studies Dr.Rajesh Ranganathan
Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore.
Future Technology in 3D Printing Dr.M.Senthilkumar
Dean – Incubation Center, Bharath Institute of Higher Education & Research, Chennai
Data Collection and Analysis for Healthcare Applications Dr.L.Ashok Kumar
Professor & Associate HoD, Department of Electrical Engineering, P.S.G. College of Technology, Coimbatore.
Application of 3D printing for Dentistry Mr. Arivazhagan Pugalendhi
Project Manager, Centre of Excellence for Manufacturing Science (COE), Coimbatore Institute of Technology, Coimbatore
3D Printing Technology for Medical Applications Dr.A.Pasupathy
Professor & HoD, Department of Electronics & Communication Engineering, Kumaraguru College of Technology, Coimbatore
Additive Manufacturing in Complex Oral & Maxillofacial Surgeries Dr.Y.Ravikumar
Associate Professor, Department of Mechanical Engineering NIT Warangal, Telangana
Looking at Additive Manufacturing in a different dimension. Dr.Rajesh Ranganathan
Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore
Additive Manufacturing for Diabetic Foot Dr.G.Sivakumar
Assistant Professor, Department of Mechanical Engineering Coimbatore Institute of Technology, Coimbatore
3D Printing for Retinal Organs Mr. Arivazhagan Pugalendhi
Project Manager, Centre of Excellence for Manufacturing Science (COE) Coimbatore Institute of Technology, Coimbatore
Additive Manufacturing in Dental Prosthetics Mr.D.Mahesh
CEO VDENT LABS, Erode.
Fitness Modifications for Bodily Processes Dr.R.Annadurai
Associate Professor, Department of Physical Education Bharathiar University, Coimbatore
10.10.2020 Association Inaugural Industrial Safety Mr.P Janarthanam
Additional Chief Inspector of Factories (Rtd), Tamil Nadu Govt. Factories Inspectorate Service.
09.07.2020 to 11.07.2020 Virtual Conference on Future Journey of Mechanical Engineering Future Journey of Mechanical Engineering Dr.Mylsamy Annadurai
Scientist ,Vice President, Tamilnadu State Council for Science and Technology, Chennai - 600025
Role of Sustainable energy in the Present Indian Context and Opportunities for mechanical Engineers Dr.Prawin Angel Michael
Associate Professor, Department ofElectrical and Electronics Engineering, Karunya Institute of Technology and sciences Coimbatore -641114
Safety with Robots Dr R.K Elangovan
Director General, Ministry of Labour and Employment, Government of India
Applied Machine Learning in the field of Mechanical Engineering Mr K Nagarajan
Head of Machine Learning ,CoE, Tata Consultancy Services, Chennai
Positive Thinking Ms.Neena Bhaskar
Talent Acquisition leader, Greater Asia becton Dickinson, Singapore
Academic Year 2019-2020
21.05.2020 to 24.05.2020 Faculty Development program on Recent Advancement in Mechanical Engineering Friction stir welding process Dr.K.Kalaiselvan
Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore
Advanced processing techniques for coating/layers in metal matrix composites Dr.K.Ravikumar
Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore
Advanced measurement system Dr.V.Sivaraman
Associate Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore
Digital manufacturing Dr.B.Shreeram
Assistant Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore
Nature inspired algorithms Dr.P.Gopikrishnan
Assistant Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore
Composite materials Dr.R.Thirumalai
Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore
16.05.2020 Autodesk sponsored Webinar on Energy audition in Industries Energy audition in Industries Dr.M.Thirugnanasambambandam
Professor, Bannari Amman Institute of technology, Sathyamangalam, Tamil Nadu.
15.05.2020 Webinar on Scheduling and Sequencing of FMS Scheduling and Sequencing of FMS Dr.M.Chandrasekaran
Department of Mechanical Engineering, North Eastern Regional Institute of Science & Technology(NERIST), Nirjuli-791109, Arunachal Pradesh.
20.04.2020 to 24.04.2020 Autodesk sponsored Faculty Development Program on e-content development in education sector e-content development in education sector Dr.S.Babu Devasenapati
Director, Centre for creativity, SNS College of Engineering

Dr. Leo Davis Wins, Professor, School of Mechanical Engineering, Karunya University.
06.03.2020 CSIR sponsored One Day National Level Workshop on “Emerging trends in Advance Biofuel and Bioenergy for Sustainable Future” Emerging Trends in Advance Bioenergy Dr.S.Pugalendhi
Professor and Head Department of BioEnergy Tamil Nadu Agricultural University, Coimbatore.
Innovations in Advance Biofuel for Sustainable Future Dr.S.Niju
Assistant Professor Department of Biotechnology, PSG College of Technology Coimbatore.
Research Areas in Advance Bioenergy & BioFuels Dr.K.Ramesh
Associate Professor, Department of Mechanical Engineering, Government College of Technology, Coimbatore.
13.09.2019 One Day National Level Workshop on “ Manufacturing Strategies towards Sustainable Future” Industry Ecology & Importance of Inverse Manufacturing Dr. P P Nihil Raj, Assistant Professor / Department of Chemical Engineering & Materials Science Centre for Sustainable future Amrita School of Engineering, Coimbatore
Sustainable Value Creation Dr. MayaMaajan, Associate Professor, Department of Chemical Engineering, Amrita School of Engineering, Coimbatore.
Emerging Trends in Manufacturing Management Dr.R Muruganandham, Professor MBA PSG Institute of Management, Coimbatore
19.09.2019 to 20.09.2019 ICMR Sponsored Two Day Translational Research Workshop on “Design and Fabrication of Patient Friendly Custom Medical Products by Additive Manufacturing Process” Introduction to AM & 3D Printing for Medical Dr. RajeshRanganathan, Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore.
Role of AM in surgery Dr. R Suresh Jayabalan, Department of Neuro Surgery, KMCH, Coimbatore
Hands on session Computer Aided Design, Scanning and Slicing Demo on 3D pen Mr. Mohammed Basheer, Managing Partner, INSTA3D Technologies LLP, Coimbatore.
Ethical Issues related to 3D Printing for Medical Applications Dr. G Sivakumar, Assistant Professor, Coimbatore Institute of Technology, Coimbatore.
Material Design and Processing Emergence of 3D Printed implants; Biomaterials for 3D Printing, Dental Applications Mr. Mahesh, Business Manager, V Engineering Solution & Dent Labs, Erode.
Hands on session on 3D Printing Mr. Joseph Mathew, Managing Partner, INSTA3D Technologies LLP, Coimbatore
04.10.2019 to 05.10.2019 ICMR sponsored Two Days Translational Research Workshop on “Biochemical Characterization of the Cell – Biomaterial Interface for Medical Implants” Introduction to Biomaterials and its Characterization Dr. A Arockiarajan, Professor, Department of Applied Mechanics, IIT Madras, Chennai.
Cell – Scaffold Interactions in the Bone Tissue Engineering Triad Dr. K Swaminathan, MD (UK) FRCP(UK), Consultant Dialectologist & Endocrinologist, KMCH, Coimbatore.
In-Vitro Characterization of Cell – Biomaterial Interaction Dr. K R Muthusami, Chief Biochemist, KMCH, Coimbatore.
Tissue Engineering Dr. B Padmapriya, Associate Professor, Department of Biomedical Engineering, PSG College of Technology, Coimbatore.
Structural and Mechanical Characterization Mr. V Suganthan, Assistant Professor, Centre for Biomaterials, VIT University, Vellore.
Prediction of Patient – Specific Tissue Engineering Scaffolds Dr. Jaseer Muhammed, Scientist- B (Biochemistry Division), ICMR – National Institute of Occupational Health, Banglore.
01.08.2019 CSIR Sponsored One day National Level Workshop on “Recycling and Industrial Waste Management for Sustainable Waste Management” Advances in Recycling & Industrial Waste Management Dr.Shankar Congeevaram, CEO – VP, Integrated Waste Management Association Chennai
Innovative Strategies for Waste Separation and Disposal Dr.J.Jeyanthi, Professor & Head Department of Environmental Engineering Government College of Technology Coimbatore
Energy Generation from Industrial Waste Dr.A.Manimekalan, Professor, Department of Environmental Science Bharathiar University Coimbatore
29.07.2019 Association inauguration Vehicle safety Dr.Saravanakumar Subramanian Volvo Cars Corporation, Sweden.
18.07.2019 CSIR Sponsored One day National Level Workshop on “Innovations in Renewable Energy & Clean Energy Production for Resilient Future” Innovations in Renewable& Clean Energy Dr.V.Prasanna Moorthy, Professor & Head, Department of EIE Engineering Government College of Technology Coimbatore
Emerging Trends in Solar based Systems Dr.S.Balaji, Assistant Professor, Department of Mechanical Engineering Kumaraguru College of Technology Coimbatore
Advanced Smart Grid and Electric Vehicles Dr.N.Vinoth Kumar, Assistant Professor Department of Electrical and Electronics Engineering Kumaraguru College of Technology Coimbatore
11.07.2019 CSIR Sponsored One day National Level Workshop on “Research Challenges and Opportunities in Advanced Computational Fluid Dynamics for Engineering Applications” Introduction to Advanced CFD Mr.S.Ramachandran, Assistant Professor, Department of Mechanical Engineering Kumaraguru College of Technology Coimbatore
Research Areas in Advanced CFD Mr.S.Priyant, CFD Application Engineer Innovent Engineering Solution Pvt Ltd Bengaluru
Case Studies on CFD Mr.S.Thirumurugan, Assistant Professor, Department of Mechanical Engineering Coimbatore Institute of Technology Coimbatore
15.06.2019 Smart Manufacturing Club - Seminar Importance of Non Destructive Testing Mr.V.M.Krishnamoorthi Chief Trainer The Engineers EDGE Institute Of NDT Coimbatore, Tamil Nadu.
14.06.2019 Career Day Job opportunity for Mechanical Engineers MrB.Nishanth, Design Engineer, CRAFTSMAN AUTOAMTION (P) LTD, Coimbatore
20.05.2019 To 25.05.2019 Six Days FDTP on ME 8319 (R2017) Engineering Thermodynamics Basic concepts of Zeorth Law of Thermodynamics Dr.K.Soorya Prakash
Assistant Professor
Anna University,
Coimbatore
Heat and work transfer & Heat Source, sink Dr. S. Sundararaj Professor Sri Krishna College of Technology, Coimbatore
Mole and mass fractions, Properties of gas mixtures Dr.Thiurumurugan Professor Coimbatore Institute of Technology Coimbatore
Application of I law (Hands on Session) & Concepts of entrophy, enthalphy, Compressibility Chart and its use Dr.Selvam Professor & HoD Dept of Automobile Engineering Nehru College of Engineering Coimbatore
Properties of Steam & Gas, Applications of gas mixtures Dr. S. Sivakumar (FN) Asst. Professor – III Kumaraguru College of Technology, Coimbatore
Psychrometric Process, Psychrometric Charts
Dr. N. Gunasekar (FN) Associate Professor Sri Ramakrishna Engineering College, Coimbatore
Academic Year 2018-2019
23.03.2019 National Conference on Recent Advancement in Design, Automation and intelligent Systems Inaugural Address Dr.S.Krishna Kumar, Senior Scientists, DRDO, Chennai
28.02.2019 Seminar (IWS) Advances in Welding Process Dr.M.Govindaraju, Professor, Amrita University, Ettimadai Coimbatore-641112
13.02.2019 Expert Lecture Series Quality expected by Core Industry From Engineering Graduates Thiru R.Murugan, United Enterprises, Coimbatore.
21.02.2019 One day National Level  workshop on Research Perspectives on “Futuristic Energy Materials and Energy Storing Systems” Research areas in Energy Storing Systems Dr.P.Viswanathan,
Associate Professor, Department of Mechanical Engineering, PSG College of Technology, Coimbatore
Advanced Manufacturing Technologies for Energy Materials & System s Dr. R.Rajeswari,
Associate Professor, Government College of Technology, Coimbatore.
Future Integrated Energy Systems Mr.Rajendran,
Manager Kondaas Energy Systems Coimbatore
Functionally Graded Materials, Smart Materials Dr.SK Srinivasan,
Founder & CEO K S T Wind Engineering India Tiruppur
13.02.2019 Expert Lecture Series Quality expected by Core Industry From Engineering Graduates Mr.ThiruR.Murugan,
United Enterprises,Coimbatore.
18.06.2018 & 19.06.2018 Faculty Development Program on Advances in FEA and Modern Manufacturing Processes Importance of Technical Education Dr. P. R. Muthuswamy
Director-Academics, Dr.NGP. Institutions
Modern Manufacturing Processes KKM software solutions
Advances and Hands on Training in FEA Mr.R.Ganesh,
Innovent Engineering Solutions, Bengaluru.
06.07.2018 Carrier Day 1. Industry expectations from Fresh Engineers. 2. Career Opportunities in Mechanical Engineering 1. Mr.Pradeep Rajaram
Human Resource Titan Company Limited, Coimbatore

2. Dr.V.S.SreeBalaji,
Professor and Head Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore.
04.08.2018 ASSOCIATION INAUGURATION - MECHLADOZ   Shri.M.Shyam Kumar Raghavendran M.E.,
Managing Partners, M/s.WarenPars, Coimbatore.
01.09.2018 Smart Manufacturing Club Inaugural 1. Need of Smart Manufacturing 2. Role of Design in Manufacturing 1. Mr. Mohammed Basheer,
Managing Partner INSTA3D Technologies LLP, Coimbatore.
2. Mr.Logesh Kumar, Manager ARRIS - CAD Solution, Coimbatore
01.09.2018 DOE Club Inaugural DOE 1. Dr.K.Mylsamy,
2. Dr.K.Kalaiselvan,
3. Dr.R.Thirumalai, Professor, Department of Mechanical Engineering, Dr.N.G.P.Institute of Technology, Coimbatore.
11.09.2018 One Day National Level Workshop on
Industry 4.0 and Smart Manufacturing Strategies
The essence of Smart Manufacturing and industry 4.0 Mr. Kumar Gangwani,
General Manager, Big Data at ITC Infotech, Bengaluru.
Optimizing Production with Big Data Platforms and Data, Analytics, AI methods and Analysis Mr. Paul Antony Doss,
Senior Manager, Nippon Electric Corporation, Chennai.
Additive Manufacturing Revolution: Perspective: from Prototype towards mass Production, New materials & Economic aspects. Dr. Rajesh Ranganathan,
Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore.
Industrial Internet of Things (IIOT) Dr.Kumar Rajamani ,
Manager M/s. Robert Bosch Engineering & Business Solutions Ltd., Bangalore.
04.10.2018 One Day National Level Workshop on
Research Perspectives of 3D Printing & Additive Manufacturing in Medical Applications
The essence of Additive Manufacturing and 3D Printing in Medical Field Dr.M.Venkatesan
Associate Professor, School of Mechanical Engineering, SASTRA Deemed University, Thanjavur.
Future Personalized Bio Printing (3D Printing of drugs, living cells, tissues, and organs). Dr.Rajesh Ranganathan
Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore.
Future acellular biomaterials & Models, Guides, and Inert Materials/Implants Mr.Mahesh
Business Manager V Engineering Solution & V Dent Labs, Erode.
Demonstration of Additive Manufacturing (FDM) & 3D Pen Mr.Mohammed Basheer
Mr.Joseph Mathew
Managing Partner, INSTA3D Technologies LLP, Coimbatore.
11.10.2018 & 12.10.2018 Two Day National Level Workshop on
Biomimetic Medical Device Design Using TRIZ
Augmented and Mixed Reality for Medical Applications. Mr. Srinivasan Padmanaban,
CEO, Easy Design Systems Pvt. Ltd. Coimbatore.
Creativiy: Innovation : Health Monitoring using Future Technology Dr. Pinnamaneni Bhanu Prasad,
Technical Advisor, KELENN Technology, France
Bio – inspire design of medical equipment based on TRIZ Dr. V.S.SreeBalaji,
Professor and Head Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore.
Recent trends in Medical Gas Pipeline System (MGPS) and Modular Occupational Therapy (MOT) Mr. Arun Kumar Pillai,
Chief Executive Officer, GFLOW, Coimbatore.
Robotic surgery applications in medical field Dr. Anbukkani Subbian,
Obstetrician Gynecologist, KMCH, Coimbatore.
Advances in Nuclear Medicines through Innovations Dr. Ajit Shinto,
Department of Nuclear Medicine and PET CT, KMCH, Coimbatore.
Finite Element Methods in Medical Applications Dr. Shankar Subramaniam,
Associate Professor, Mechatronics Engineering, Kongu Engineering College, Perundurai.
Composite coatings for Medical Applications Dr. K.Ravi Kumar,
Professor, Department of Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore.
16.11.2018 DST – SERB sponsored One Day seminar of “Processing and Characterization of Multifunctional Green Composite Coating for Medical Equipments and Implants” Multifunctional Bioceramic Composite Coatings Dr. T.M.Sridhar,
Professor, Department of Analytical Chemistry, University of Madras, Chennai.
Implants in Orthopaedics Applications Dr. K.Baskaran,
Department of Orthopaedics, KMCH, Coimbatore.
Challenges in Manufacturing in Composites Dr. V.Anandakrishnan,
Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirapalli.
Imaging Techniques for Nano materials Dr. N.Selvakumar,
Senior Professor, Department of Mechanical Engineering, MEPCO Schlenk Engineering college, Sivakasi, Tamilnadu.
Thermal spray coating techniques Dr. K.Ramachandran,
Associate Professor, Department of Physics, Bharathiar University, Coimbatore.
Academic Year 2017-2018
25.01.2018 Guest Lecture Next Generation of Communication(4G) - An Industrial Transformation Mr. Paul Antony Doss,
Senior Manager, Nippon Electric Corporation, Chennai
20.01.2018 Workshop AUTOMOBILE ENGINEERING in association with SAE, Ambal Auto Ambal Autos,
Ramanathapuram, Coimbatore
06.01.2018 Academic Expert Lecture Design and Automation trend and need - Automotive industry Dr.M. Giriraj,
Professor, VIT – vellore.
05.01.2018 & 06.01.2018 Workshop Advances in Welding and Non Destructive Testing in association with Indian Welding Society 1. Dr.N.Murugan,
Professor of Robotics and Automation Engg. PSG College of Tech, Coimbatore.

2. Mr. N.Rajasekaran
Deputy Genaral Manager, BHEL Trichy.

3. Dr.Govindharaju,
Professor, Amirtha University, Coimbatore

4. Mr.B. Vignesh,
Engineer & Mr.S.Selva Prakash, Proprietor Aurora Institute & Inspection services (AIIS),Coimbatore.

5. Mr.R.Dhamodharan,
Director, BIS Group of Companies, Coimbatore.

6. Dr.V.Anandakrishnan,
Assistant Professor, National Institute of Technology, Trichy.
30/11/2017 Faculty Development Program Emerging Trends in Industry
• Creativity and Idea Generation
• Attitude & Work Life Balance
• Economic Survival on Demonetization and implications of GST
• Industrial Automation
• Productivity Improvement Techniques
Dr.Kumar Rajamani
Manager M/s. Robert Bosch Engineering & Business Solutions Ltd., Bangalore
03.07.2017 Alumni Lecture Awareness Program on GST Mr. K. Sivasankar,
Press Editor Writer, The Hindu, Vadapalani, Chennai
08.07.2017 Carrier Day Mr. M. Mahendran,
Head . Design, Shanthi Gears Ltd, Coimbatore

Mr. S. B. Adithya,
Application Engineer, USAMCADSoft pvt Ltd, Coimbatore
17.07.2017 - 18.07.2017 Workshop Autodesk Fusion Mr. S. B. Adithya,
Application Engineer, USAMCADSoft pvt Ltd, Coimbatore
11.08.2017 Guest Lecture Product Development Mr.S. Guru Selvaraj,
Flow Link Systems (P) Ltd., Uthupalayam,
Coimbatore
19.08.2017 Guest lecture Industry readiness & employability skills for future Mr.Maria Antony Juderaj,
Dupty Manager – HR, L&D, ELGI Equipments, Coimbatore.
23.08.2017 Guest lecture

Higher Studies in Abroad
Ms. Krishti Chatterjee,
Director of International Recruitment, Embry.Riddle Aeronautical University.Asia
24.08.2017 Guest lecture Dynamic analysis on Gears Mr.R.Mahendiran,
Shanthi Gears Limited, A – Unit, Coimbatore
Academic Year 2016-2017
02.02.2017 - 03.02.2017 National Level Seminar Mechanical Properties, Welding Characteristics And Corrosion Behavior Studies Of Nickel Based Alloy, Inconel 718 For Applications In Marine Environment Dr.N.Arivazhagan,
Dean.SMEC, VIT University, Vellore
27.03.2017 Workshop Patient Friendly Health Care Equipments Design Using Triz – An Innovative Technique Dr. Pinnamaneni Bhanu Prasad,
Dr. Anbukkani Subbian,
Dr. Kumar Rajamani,
Dr.R. Saravanan
20.07.2016 & 21.07.2016 guest lecture welding and fabrication Mr.C.S.Rangarajan
Course Coordinator and Placement Officer, Institute of Welding Technology, Coimbatore
22.07.2016 guest lecture advances in welding technology and ndt Mr. r. Thiraviam,
Senior Welding Engineer, PDO, Oman
25.07.2016 guest lecture robotics Mr. t. Suresh,
Technical Coordinator, Technovation, Coimbatore
15.07.2016 guest lecture career opportunities in mechanical engineering Mr. s. Karaiadiselvan,
Managing director, CADD Centre Training Services, chennai
16.07.2016 guest lecture recruitment trend in manufacturing companies Mr. Vignesh Eswaran
Manager – HR, Bestomech Industries , coimbatore
16.07.2016 guest lecture simulia analysis software and its application in the field of mechanical engineering Mr. Dileepkumar
Assistant Manager. HR, EDS Technologies Bangalore
01.08.2016 guest lecture automotive engineering and career prospects Mr. Mayank arora
chief marketing officer

Mr. Prashanth
Design Engineer, Elite Technologies, mumbai
12.08.2016 guest lecture advances in mechanical sciences Dr. Godson Asirvatham
director . centre for research in thermal sciences

Dr.Leo Dev Wins,
Centre for research, Director . Centre for research in design and Manufacturing, Karunya university, coimbatore
11.08.2016 seminar autodesk inventor and autodesk fusion 360 Mr.S.B.Athithya
application engineer, USAM CAD Soft, coimbatore
12.08.2016 seminar employability gap Mr..T.Anand
director – sales, 3W Technologies, karaikudi
30.09.2016 dirt bike event motovate 2k16  
Academic Year 2015-2016
02.02.2016 Guest Lecture Product Analysis and Computational Fluid Dynamics Ms. Sagar Metha,Institute of Industrial Design, CADD Centre
18.02.2016 Guest Lecture Fundamentals and Applications of Fluid Mechanics & Higher Education Opportunities Dr. S. Vengadesan,
Professor &Head, Applied Mechanics, IIT Madras
24.03.2016 Guest Lecture Conference Chair. International conference on Recent Advancements in Design, Automation and Intelligent Systems Dr. Bhanu Prasad Pinnamaneni,
Director (R&D), Kelenn Technology, France
24.03.2016 Guest Lecture Guest of Honor . International Conference on Recent Advancements in Design, Automation and Intelligent Systems Dr.Kua.Anan Techato,
Deputy Dean, Research & Academic, Prince of Songkla University, Thailand
24.03.2016 Guest Lecture Keynote Speaker. International Conference on Recent Advancements in Design, Automation and Intelligent Systems Dr.Rajesh Ranganathan,
Associate Professor, Mechanical Engineering, CIT, Coimbatore
02.02.2016 Seminar Product Analysis and Computational Fluid Dynamics Dr.N.G.P. IT, Coimbatore
18.02.2016 Seminar Fundamentals and Applications of Fluid Mechanics & Higher Education Opportunities Dr.N.G.P. IT, Coimbatore
24.03.2016 International Conference ICRADAIS 2K16 Dr.N.G.P. IT, Coimbatore
10.07.2015 Guest Lecture Validation Techniques in New Product Development Mr.Ravindra Bandari,
Senior Architect, Robert Bosch Engineering and Business Solution Pvt.Ltd, Coimbatore
10.07.2015 Seminar Career Opportunities in Mechanical CAD Mr.A.R.Sathya Narayanan,
Managing Director,, USAM CAD Soft India Pvt.Ltd, Coimbatore
10.07.2015 Guest Lecture Foundry Technology and its importance in the industry Mr.V.S.Saravanan,
General Manager, Indo Shell Cast Pvt.Ltd, Coimbatore
10.07.2015 Guest Lecture Emerging Technologies in Quality Control & Inspection Mr.Raman Baskaran,
Manager, FARO Business Tech India Pvt.Ltd, Chennai
14.08.2015 Seminar Career Guidance Mr.A. Antoine Baskar Manager
HRM & C Kirloskar Brothers Limited, Coimbatore
15.09.2015 Seminar Role of Engineers Mr.S.Pandiraj
Chief Executive Officer, Apex Design Center, Ganapathy, Coimbatore
14.08.2015 Career Day
.
Dr.N.G.P. IT
15.09.2015 Engineers Day
.
Dr.N.G.P. IT
19.11.2015 Workshop MS.Office for Non. Teaching Staffs Mr.A.G.Karthikeyan
Mr.K.Kiran
Dr.N.G.P. IT
Academic Year 2014-2015
26.11.2014 Guest lecture Automobile Engineering Mr.Vivek Venkataraman
Lead Industrial Engineer, GMNA Manufacturing, General Motors,USA
19.09.2014 Workshop Robotics in Artillery field Dr.S.Krishnakumar
Senior Technical officer, Ministry of Defence, DRDO, Avadi, Chennai
26.08.2014 Association Inauguration Function Adolescence Psychology Dr.B.Selvaraj,
Associate Professor, Govt. Arts College, Coimbatore.
26.08.2014 Association Inauguration Function Think Mechanical Engineering Mr. D.Nandakumar,
Vice.President, Federation of Indian Chambers of Commerce and Industry
31.07.2014 Placement Drive for Final Year Students . Sysnautix Technologies Coimbatore
21.07.2014 To
25.07.2014
Value Added Course Auto CAD Training For 2nd Year ‘A’ Sec CADD CENTRE. Coimbatore
22.07.2014 Intellectual  Industrial Visit for Colleges Industrial Visit ((For Final Year  Students) Edu2020 .Chennai
18.07.2014 Yoga Class for Faculty Yoga Isha Yoga Centre, Coimbatore
17.07.2014 To 
19.07.2014
Value Added Course Unigraphics  Training For Final Year COINDIA, Coimbatore
09.07.2014 To 
16.07.2014
Value Added Course ANSYS Training For 3rd Year ‘B’ Sec Innovent Technology, Bangalore
01.07.2014 To 
04.07.2014
Value Added Course Soft Skills Development Hope Factory
02.07.2014 To 
08.07.2014
Value Added Course ANSYS Training For 3rd Year ‘A’ Sec Innovent Technology, Bangalore
30.06.2014 Career Day Challenges faced in core production at industrial floor Mr.Gangatharan, HR . Head
M.s. Shardha Terry Products Pvt. Ltd.
30.06.2014 Career Day Today's design technology in mechanical industry Mr. Manisekhar Rajagopal,
Managing Director,M.s. Sysnautix Technologies
30.06.2014 Career Day Fresher's preparation to face the industries Mr.Vimal Francis,HR.Head (Campus Recruitment Division)
M.s Elgi Equipments Pvt. Ltd
30.06.2014 Career Day Graduates for Mechanical Industry Mr.N.Visvanathan,
Managing Partner (Ammarun Foundries) & President COINDIA
25.06.2014 One Day Faculty Orientation Programme Overview on Research Proposals for Funding and Consultancy, Department Existing Practices – Documentation, NAAC.ISO Dr. S.Muthu,
Dr.V.S Sree Balaji, Dr.K.Ravi Kumar,
Dr. K. Kalaiselvan